2 pieces High-quality Sepa hinge for recess, 180°, for invisible stop, surface: stainless steel look, 52 mm (2.1″), 15.04.076-0. Furniture milling hinge, for furniture door, cabinet door, folding table, flap, box and much more, by SISO Denmark

Description

2 pieces Sepa hinge, made of solid die-cast zinc for recessing, 180°, for invisible stop, rounded, surface: stainless steel look, 15.04.076-0, size: 52 mm (2.1″)

Application:

Furniture milling hinge, for furniture door, cabinet door, folding table, flap, box and much more.

 

The 15.04.076-0 furniture hinges for concealed stop have seven axes, connected by robust stainless steel pins. This gives these furniture hinges a special kinematics of movement and stability.

The concealed furniture hinges 15.04.076-0 can be used to connect table tops or table tops and are suitable for wood thicknesses from at least 26 mm (1-1/32″).

 

In addition, they are suitable for both internal (recessed) and surface-mounted (present) furniture doors and cabinet doors and furniture flaps of all kinds.

The stable Sepa hinges 15.04.076-0 have a maximum load capacity of 20 kg for two hinges.

The high-quality furniture hinges 15.04.076-0 have a simple and robust design and are perfect for:

• Window
• Furniture door
• Cabinet door
• Folding table
• Flap
• Box

Technical details:

• Weight: 46 g
• Load capacity: 20 kg for 2 pieces
• Size: 52 mm (2.1″)
• to let in
• Beam angle: 180 degrees
• Adjustment: +/- 2.5 mm via slotted holes
• with rounded flaps for mechanical recess
• concealed mounting
• for invisible stroke
• can be used on the left or right
• high-quality
• robust
• stable
• Stainless steel look
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Stainless steel look

Assembly:

• The Sepa hinge 15.04.076-0 is recessed
• The inlet hinge has eight mounting holes for stable mounting
• First, the wooden panels are milled out in the appropriate places
• Then the Sepa hinge is inserted into the recess and first fastened through the slotted holes
• If necessary, the furniture hinge must be adjusted with the help of the slotted hole and the screws tightened
• Subsequently, the round holes are also screwed together (for further details see
  assembly drawing
  )

 

Dimensions:

• Furniture hinge length: 52 mm (2-3/64″)
• Flap width: 18 mm (45/64″)
• Depth: 11 mm (7/16″)

 

For further dimensions and details
see technical drawing
.

Material:

• The furniture hinges 15.04.076-0 are made of solid die-cast zinc

Included in delivery:

• 2 pieces Sepa hinge 15.04.076-0 made of solid die-cast zinc, stainless steel look

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article identification number: 15.04.076-0
• EAN Number: 5704866053419

Manufacturer: SISO Denmark