High-quality flap lock, made of Zamak, version: without master key system, 14.03.005-0.

Wed, 16 Apr 2025 13:58:17 +0000

Robust flap lock, with cylinder rosette and two keys, incl. strike plate, made of solid die-cast zinc, surface: nickel-plated, 14.03.005-0, version: without master key system

Application:

Inlet flap lock for flaps, sliding doors, cabinets and much more.

Locks without a master key system can only be opened with the associated individual key.

High-quality flap lock 14.03.005-0 from SISO, version: without master key system. Example

To close the flap lock 14.03.005-0, the lock cylinder must be pressed and then the key must be turned by 90 degrees (push-turn bolt).

The inlet flap lock has a permanently mounted pin cylinder.

No need to lock: key can be removed in open and closed position.

High-quality flap lock 14.03.005-0 from SISO, version: without master key system. View from the back

The high-quality flap locks 14.03.005-0 are perfect for, among other things:

Technical details:

Surface:

Nickel-plated
Nickel-plated surfaces are characterized by their high corrosion resistance and durability, making them ideal for use in damp rooms such as kitchens and bathrooms
They offer an elegant, shiny look that looks modern and timeless at the same time
They are also easy to clean, as they make dirt and fingerprints less visible and are easy to clean

Assembly:

The fastening is done with wood screws 3 mm screws (not included)
Flap lock 14.03.005-0 is for screwing
To install the flap lock, a hole with a diameter of ⌀20 mm (25/32″) must be drilled
The mounting plate of the flap lock 14.03.005-0 has three mounting holes with a diameter of ⌀3 mm
The strike plate has two mounting holes with a diameter of ⌀3 mm (for more details see assembly drawing)

High-quality flap lock 14.03.005-0 from SISO, version: without master key system. Assembly drawing

Dimensions:

Flap lock diameter: ⌀19 mm (3/4″)
Mounting plate diameter: ⌀35 mm (1-3/8″)
Cylinder rosette diameter: ⌀25 mm (63/64″)
Strike plate width: 30 mm (1-3/16″)
Cylinder length: 24 mm (15/16″)
Latch depth: 15 mm (19/32″)

High-quality flap lock 14.03.005-0 from SISO, version: without master key system. Technical drawing

Material:

The flap locks 14.03.005-0 are made of solid die-cast zinc
Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

1 piece flap lock 14.03.005-0 made of solid die-cast zinc, nickel-plated, version: without master key system
1 piece of strike plate
Two pieces of wrench
1 piece cylindrical rosette

Additional information:

Manufacturer’s part numbers:

Manufacturer: SISO Denmark