4 screw nuts with M10 thread, made of robust steel, surface: galvanized, 12 mm (0.5″), 3006805. Drive-in groove, for screw, sofa base, cabinet base, furniture castor, prefabricated house construction, climbing handle and much more, by EMUCA

Fri, 23 May 2025 06:00:35 +0000

4 pieces of drive nut with M10 female thread and four impact points, screw-on plate, made of robust steel, surface: galvanized, 3006805, size: 12 mm (0.5″)

Application:

Drive-in groove, for screw, sofa base, cabinet base, furniture castor, prefabricated house construction, climbing handle and much more.

The 3006805 thread is used to fasten screws, furniture feet, leveling feet, etc. under furniture, sofas, appliances, machines, etc.

The 3006805 nut can also be used to attach screws, Allen screws or equipment to a wooden wall or to a climbing wall.

The high quality 3006805 drive nuts are perfect for:

Technical details:

Surface:

Assembly:

The top plate has four impact tips
First of all, a hole with a diameter of ⌀13 mm (33/64″) must be drilled in the furniture floor or wooden wall at the point where the impact thread is to be placed
Depending on the specific application, the drive nut is 3006805 driven into the plate from the back or from the front
Screws, furniture feet or furniture castors equipped with a screw are then screwed into the thread of the fastening plate 3006805 and tightened

Dimensions:

Nut diameter: ⌀12 mm (15/32″)
Width: 22.5 mm (57/64″)
Depth: 11 mm (7/16″)
Thread: M10
Impact tip length: ⌀7.5 mm (19/64″)

Impact nut with M10 thread, 12 mm, from EMUCA, galvanized. Technical drawing

For further dimensions and details
see technical drawing
.

Material:

Included in delivery:

Manufacturer’s part numbers:

Manufacturer: EMUCA