Application:

Sturdy eccentric pin for furniture connection and much more.

The practical eccentric pin 8084001 is a high-quality, robust connecting fitting for furniture construction and enables an almost invisible yet highly stable attachment of shelves in carcase furniture.

It has a wooden thread and is used for the fixed and invisible connection of carcass parts and is particularly suitable for shelves, cabinets and modular furniture.

The connecting bolt 8084001 is inserted into the side wall of a piece of furniture, for example, and connected to an eccentric connection in the underside of a shelf.

By simply putting it on and tightening, a form-fitting and force-fit connection is created, which at the same time secures the floor against lifting.

Turning the eccentric tightens the pin tightly and stabilizes the connection.

Suitable for the eccentric connectors 8470907, 8070907, 5054716 and 8049216.

The eccentric bolts 8084001 are perfect for applications where a precise, resilient and at the same time detachable connection is required.

Ideal for a wide range of furniture applications – enables quick and stable assembly and disassembly with common tools.

The high-quality connecting bolts 8084001 are perfect for, among other things:

• Carcass furniture
• Shelves
• Interior finish
• Shopfitting
• Exhibition
• Furniture connection

Technical details:

• Weight: 5.7g
• Size: 8 mm (5/16″)
• Easy installation, practical, stable
• For Hole ⌀6
• Zamak
• Zamak (zinc die-casting)
• high brand quality from UMAXO®

Surface:

• Zamak
• A zamak surface offers high corrosion resistance, so furniture hardware remains functional for a long time, even in damp environments
• In addition, thanks to its strength and dimensional stability, Zamak enables reliable load-bearing capacity

Assembly:

• The connecting bolt is screwed 8 mm (5/16″) deep into the side or middle section
• The shelf is then placed on top so that the housing grips cleanly over the screw head
• By tightening the clamping screw in the housing, the floor is tightened in a force-fit manner and at the same time secured against lifting (for further details, see assembly drawing)

Dimensions:

• Outer diameter of connecting bolt: ⌀6 mm (15/64″)
• Length of the threaded part: 8 mm (5/16″)
• Flange thickness above the plate surface: 2 mm (5/64″)
• Exterior Length: 6.8 mm (17/64″)

For more dimensions and details, see technical drawing.

Material:

• The connecting bolts 8084001 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
• In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

• 20 pcs connecting bolts 8084001 made of solid die-cast zinc, Zamak
• The eccentric connectors 8470907, 8070907, 5054716, 8049216 are not included in the scope of delivery and must be ordered separately

Manufacturer’s part numbers:

• Item ID: 8084001
• EAN number: 8432393120973

Manufacturer: EMUCA

Application:

Sturdy eccentric pin for furniture connection and much more.

The practical eccentric pin 8083901 is a high-quality, robust connecting fitting for furniture construction and enables an almost invisible yet highly stable attachment of shelves in carcass furniture.

It has a wooden thread and is used for the fixed and invisible connection of carcass parts and is particularly suitable for shelves, cabinets and modular furniture.

The connecting bolt 8083901 is inserted into the side wall of a piece of furniture, for example, and connected to an eccentric connection in the underside of a shelf.

By simply putting it on and tightening, a form-fitting and force-fit connection is created, which at the same time secures the floor against lifting.

Turning the eccentric tightens the pin tightly and stabilizes the connection.

Suitable for the eccentric connectors 8470907, 8070907, 5054716 and 8049216.

The eccentric bolts 8083901 are perfect for applications where a precise, resilient and at the same time detachable connection is required.

Ideal for a wide range of furniture applications – enables quick and stable assembly and disassembly with common tools.

The high-quality connecting bolts 8083901 are perfect for, among other things:

• Carcass furniture
• Shelves
• Interior finish
• Shopfitting
• Exhibition
• Furniture connection

Technical details:

• Weight: 2.31 g
• Size: 11 mm (7/16″)
• Easy installation, practical, stable
• For Hole ⌀6
• Zamak
• Zamak (zinc die-casting)
• high brand quality from UMAXO®

Surface:

• Zamak
• A zamak surface offers high corrosion resistance, so furniture hardware remains functional for a long time, even in damp environments
• In addition, thanks to its strength and dimensional stability, Zamak enables reliable load-bearing capacity

Assembly:

• The connecting bolt is screwed 11 mm (7/16″) deep into the side or middle section
• The shelf is then placed on top so that the housing grips cleanly over the screw head
• By tightening the clamping screw in the housing, the floor is tightened in a force-fit manner and at the same time secured against lifting (for further details, see assembly drawing)

Dimensions:

• Outer diameter of connecting bolt: ⌀6 mm (15/64″)
• Length of the threaded part: 11 mm (7/16″)
• Flange thickness above the plate surface: 2 mm (5/64″)
• Exterior Length: 6.8 mm (17/64″)

For more dimensions and details, see technical drawing.

Material:

• The connecting bolts 8083901 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
• In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

• 20 pcs connecting bolts 8083901 made of solid die-cast zinc, Zamak
• The eccentric connectors 8470907, 8070907, 5054716, 8049216 are not included in the scope of delivery and must be ordered separately

Manufacturer’s part numbers:

• Article ID: 8083901
• EAN number: 8432393120966

Manufacturer: EMUCA

Application:

Sturdy eccentric pin for furniture connection and much more.

The practical eccentric pin 8057205 is a high-quality, robust connecting fitting for furniture construction and enables an almost invisible yet highly stable attachment of shelves in carcass furniture.

It has a wooden thread and is used for the fixed and invisible connection of carcass parts and is particularly suitable for shelves, cabinets and modular furniture.

The connecting bolt 8057205 is inserted into the side wall of a piece of furniture, for example, and connected to an eccentric connection in the underside of a shelf.

By simply putting it on and tightening, a form-fitting and force-fit connection is created, which at the same time secures the floor against lifting.

Turning the eccentric tightens the pin tightly and stabilizes the connection.

Suitable for the eccentric connectors 8470907, 8070907, 5054716 and 8049216.

The eccentric bolts 8057205 are perfect for applications where a precise, resilient and at the same time detachable connection is required.

Ideal for a wide range of furniture applications – enables quick and stable assembly and disassembly with common tools.

The high-quality connecting bolts 8057205 are perfect for, among other things:

• Carcass furniture
• Shelves
• Interior finish
• Shopfitting
• Exhibition
• Furniture connection

Technical details:

• Weight: 2.1 g
• Size: 10 mm (25/64″)
• Easy installation, practical, stable
• For bore ⌀3.5
• galvanized
• Steel (robust)
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• The connecting bolt is screwed 10 mm (25/64″) deep into the side or middle section
• The shelf is then placed on top so that the housing grips cleanly over the screw head
• By tightening the clamping screw in the housing, the floor is tightened in a force-fit manner and at the same time secured against lifting (for further details, see assembly drawing)

Dimensions:

• Outer diameter of connecting bolt: ⌀3.5 mm (9/64″)
• Length of the threaded part: 10 mm (25/64″)
• Flange thickness above the plate surface: 2 mm (5/64″)
• Exterior Length: 6.8 mm (17/64″)

For more dimensions and details, see technical drawing.

Material:

• The connecting bolts 8057205 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 20 pcs connecting bolts 8057205 made of robust steel, galvanized
• The eccentric connectors 8470907, 8070907, 5054716, 8049216 are not included in the scope of delivery and must be ordered separately

Manufacturer’s part numbers:

• Article ID: 8057205
• EAN number: 8432393120447

Manufacturer: EMUCA

Application:

Sturdy eccentric pin for furniture connection and much more.

The practical eccentric pin 8905305 is a high-quality, robust connecting fitting for furniture construction and enables an almost invisible yet highly stable fastening of shelves in carcass furniture.

It is used for the fixed and invisible connection of carcass parts and is particularly suitable for shelves, cabinets and modular furniture.

The connecting bolt 8905305 is inserted into the side wall of a piece of furniture, for example, and connected to an eccentric connection in the underside of a shelf.

By simply putting it on and tightening, a form-fitting and force-fit connection is created, which at the same time secures the floor against lifting.

Turning the eccentric tightens the pin tightly and stabilizes the connection.

Suitable for the eccentric connectors 8470907, 8070907, 5054716 and 8049216.

The eccentric bolts 8905305 are perfect for applications where a precise, resilient and at the same time detachable connection is required.

Ideal for a wide range of furniture applications – enables quick and stable assembly and disassembly with common tools.

The high-quality connecting bolts 8905305 are perfect for, among other things:

• Carcass furniture
• Shelves
• Interior finish
• Shopfitting
• Exhibition
• Furniture connection

Technical details:

• Weight: 2 g
• Size: 11 mm (7/16″)
• Easy installation, practical, stable
• For Hole ⌀6
• galvanized
• Steel (robust)
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• The connecting bolt is screwed 11 mm (7/16″) deep into the side or middle section
• The shelf is then placed on top so that the housing grips cleanly over the screw head
• By tightening the clamping screw in the housing, the floor is tightened in a force-fit manner and at the same time secured against lifting (for further details, see assembly drawing)

Dimensions:

• Outer diameter of connecting bolt: ⌀6 mm (15/64″)
• Length of the threaded part: 11 mm (7/16″)
• Flange thickness above the plate surface: 2 mm (5/64″)
• Exterior Length: 6.8 mm (17/64″)

For more dimensions and details, see technical drawing.

Material:

• The connecting bolts 8905305 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 20 pcs connecting bolts 8905305 made of robust steel, galvanized
• The eccentric connectors 8470907, 8070907, 5054716, 8049216 are not included in the scope of delivery and must be ordered separately

Manufacturer’s part numbers:

• Item ID: 8905305
• EAN number: 8432393122809

Manufacturer: EMUCA

Application:

Sturdy eccentric pin for furniture connection and much more.

The practical eccentric pin 8905205 is a high-quality, robust connecting fitting for furniture construction and enables an almost invisible yet highly stable fastening of shelves in carcass furniture.

It is used for the fixed and invisible connection of carcass parts and is particularly suitable for shelves, cabinets and modular furniture.

The connecting bolt 8905205 is inserted into the side wall of a piece of furniture, for example, and connected to an eccentric connection in the underside of a shelf.

By simply putting it on and tightening, a form-fitting and force-fit connection is created, which at the same time secures the floor against lifting.

Turning the eccentric tightens the pin tightly and stabilizes the connection.

Suitable for the eccentric connectors 8470907, 8070907, 5054716 and 8049216.

The eccentric bolts 8905205 are perfect for applications where a precise, resilient and at the same time detachable connection is required.

Ideal for a wide range of furniture applications – enables quick and stable assembly and disassembly with common tools.

The high-quality connecting bolts 8905205 are perfect for, among other things:

• Carcass furniture
• Shelves
• Interior finish
• Shopfitting
• Exhibition
• Furniture connection

Technical details:

• Weight: 2.25 g
• Size: 8 mm (5/16″)
• Easy installation, practical, stable
• For Hole ⌀6
• galvanized
• Steel (robust)
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• The connecting bolt is screwed 8 mm (5/16″) deep into the side or middle section
• The shelf is then placed on top so that the housing grips cleanly over the screw head
• By tightening the clamping screw in the housing, the floor is tightened in a force-fit manner and at the same time secured against lifting (for further details, see assembly drawing)

Dimensions:

• Outer diameter of connecting bolt: ⌀6 mm (15/64″)
• Length of the drilled part: 8 mm (5/16″)
• Flange thickness above the plate surface: 2 mm (5/64″)
• Exterior Length: 6.8 mm (17/64″)

For more dimensions and details, see technical drawing.

Material:

• The connecting bolts 8905205 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 20 pieces connecting bolts 8905205 made of robust steel, galvanized
• The eccentric connectors 8470907, 8070907, 5054716, 8049216 are not included in the scope of delivery and must be ordered separately

Manufacturer’s part numbers:

• Article ID: 8905205
• EAN number: 8432393122793

Manufacturer: EMUCA

Application:

Robust eccentric connector for furniture connection and much more.

The practical eccentric connector 8070907 is a high-quality, robust connecting fitting for furniture construction and enables an almost invisible yet highly stable fastening of shelves in carcass furniture.

It is used for the fixed and invisible connection of carcass parts and is particularly suitable for shelves, cabinets and modular furniture.

The visible edge cover allows for an elegant look with exposed joints, as shown in the application photo.

The eccentric connection 8070907 is inserted into the underside of a shelf, for example, and connected to an eccentric pin in the side wall.

By simply putting it on and tightening, a form-fitting and force-fit connection is created, which at the same time secures the floor against lifting.

Turning the eccentric tightens the pin tightly and stabilizes the connection.

Suitable for the eccentric pins 8057205, 8905205, 8905305, 8084001 and 8083901.

Typical application: Insertion into shelves or partitions with ⌀20 mm (25/32″) hole, 14.5 mm (37/64″) deep, in combination with matching eccentric pins.

Ideal for a wide range of furniture applications – enables quick and stable assembly and disassembly with common tools.

The high-quality eccentric connections 8070907 are perfect for, among other things:

• Carcass furniture
• Shelves
• Interior finish
• Shopfitting
• Exhibition
• Furniture connection

Technical details:

• Weight: 11.4 g
• Size: 19 mm (3/4″)
• Easy installation, practical, stable
• Specially designed for 19 mm (3/4″) plates
• Fast and safe installation thanks to claw anchoring
• Optically clean thanks to integrated flange
• Cup Bore: ⌀20 mm (25/32″)
• Drilling Depth: 14.5 mm (37/64″)
• Mounting distance from edge (center hole): 9.5 mm (3/8″)
• Attachment: With claw sheath – no glue or additional fixation necessary
• nickel-plated
• Zamak (zinc die-casting)
• high brand quality from UMAXO®

Surface:

• Nickel-plated
• Nickel-plated surfaces are characterized by their high corrosion resistance and durability, making them ideal for use in damp rooms such as kitchens and bathrooms
• They offer an elegant, shiny look that looks modern and timeless at the same time
• They are also easy to clean, as they make dirt and fingerprints less visible and are easy to clean

Assembly:

• A ⌀20 mm (25/32″) hole is drilled 14.5 mm (37/64″) deep in the shelf; the center of the hole is 9.5 mm (3/8″) from the leading edge
• The special screw is screwed 0.374015748031496 deep into the side or middle part
• The shelf is then placed on top so that the housing grips cleanly over the screw head
• By tightening the clamping screw in the housing, the floor is tightened in a force-fit manner and at the same time secured against lifting (for further details, see assembly drawing)

Dimensions:

• Outer diameter of the housing: ⌀20 mm (25/32″)
• Case width (bottom edge): 22 mm (55/64″) x 20 mm (25/32″)
• Flange Thickness Above Plate Surface: 1 mm (3/64″)

For more dimensions and details, see technical drawing.

Material:

• The eccentric connections 8070907 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
• In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

• 20 pcs eccentric connection 8070907 made of solid die-cast zinc, nickel-plated
• The 8057205, 8905205, 8905305, 8084001 or 8083901 eccentric pins are not included and must be ordered separately

Manufacturer’s part numbers:

• Article ID: 8070907
• EAN number: 8432393120836

Manufacturer: EMUCA

Application:

Robust eccentric connector for furniture connection and much more.

The practical eccentric connector 8470907 is a high-quality, robust connecting fitting for furniture construction and enables an almost invisible yet highly stable fastening of shelves in carcass furniture.

It is used for the fixed and invisible connection of carcass parts and is particularly suitable for shelves, cabinets and modular furniture.

The visible edge cover allows for an elegant look with exposed joints, as shown in the application photo.

The eccentric connection 8470907 is inserted, for example, into the underside of a shelf and connected to an eccentric pin in the side wall.

By simply putting it on and tightening, a form-fitting and force-fit connection is created, which at the same time secures the floor against lifting.

Turning the eccentric tightens the pin tightly and stabilizes the connection.

Suitable for the eccentric pins 8057205, 8905205, 8905305, 8084001 and 8083901.

Typical application: Insertion into shelves or partitions with ⌀20 mm (25/32″) hole, 12.5 mm (31/64″) deep, in combination with matching eccentric pins.

Ideal for home and office furniture with flat packaging and quick assembly.

The high-quality eccentric connections 8470907 are perfect for, among other things:

• Carcass furniture
• Shelves
• Interior finish
• Shopfitting
• Exhibition
• Furniture connection

Technical details:

• Weight: 11.4 g
• Size: 16 mm (5/8″)
• Easy installation, practical, stable
• Specially designed for 16 mm (5/8″) plates
• Fast and safe installation thanks to claw anchoring
• Optically clean thanks to integrated flange
• Cup Bore: ⌀20 mm (25/32″)
• Drilling depth: 12.5 mm (31/64″)
• Mounting distance from edge (center hole): 9.5 mm (3/8″)
• Attachment: With claw sheath – no glue or additional fixation necessary
• nickel-plated
• Zamak (zinc die-casting)
• high brand quality from UMAXO®

Surface:

• Nickel-plated
• Nickel-plated surfaces are characterized by their high corrosion resistance and durability, making them ideal for use in damp rooms such as kitchens and bathrooms
• They offer an elegant, shiny look that looks modern and timeless at the same time
• They are also easy to clean, as they make dirt and fingerprints less visible and are easy to clean

Assembly:

• A ⌀20 mm (25/32″) hole is drilled 12.5 mm (31/64″) deep in the shelf; the center of the hole is 9.5 mm (3/8″) from the leading edge
• The special screw is screwed 8 mm (5/16″) deep into the side or middle part
• The shelf is then placed on top so that the housing grips cleanly over the screw head
• By tightening the clamping screw in the housing, the floor is tightened in a force-fit manner and at the same time secured against lifting (for further details, see assembly drawing)

Dimensions:

• Outer diameter of the housing: ⌀20 mm (25/32″)
• Case width (bottom edge): 22 mm (55/64″) x 20 mm (25/32″)
• Flange Thickness Above Plate Surface: 1 mm (3/64″)

For more dimensions and details, see technical drawing.

Material:

• The eccentric connections 8470907 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
• In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

• 20 pieces of eccentric connection 8470907 made of solid die-cast zinc, nickel-plated
• The eccentric pins are not included and must be ordered separately

Manufacturer’s part numbers:

• Article ID: 8470907
• EAN number: 8432393122304

Manufacturer: EMUCA

Application:

Furniture screw, for cabinet, furniture, shelf, carcass furniture and much more.

Suitable for connecting furniture parts or carcass parts to each other through a pre-drilled mounting hole.

The Confirmat screw 7011905 ensures an extremely strong connection, ideal for load-bearing structures and repeated disassembly.

Thanks to the hexagon socket with SW3, the screws can be screwed in easily and precisely – even in tight spaces.

Perfect for DIY projects and professional furniture assembly in the residential and commercial sectors.

The high-quality one-piece connectors 7011905 have a simple and robust design and are perfect for:

• Cabinet
• Furniture
• Shelf
• Carcass furniture

Technical details:

• Weight: 3.7 g
• Size: 50 mm (2″)
• Tip shape: with lace
• Head Shape: Countersunk Head
• robust
• stable
• galvanized
• Steel
• robust
• high brand quality from UMAXO®

Surface:

• Galvanized

Assembly:

• The Confirmat 7011905 can be used to connect two parts of the furniture
• A hole with a diameter of ⌀3.5 mm (9/64″) must be drilled in the body at the edge and a mounting hole with a diameter of ⌀5 mm (13/64″) must be drilled in the piece of furniture to be fastened
• After that, the furniture screw is inserted 7011905 through the fastening hole and the two pieces of furniture to be connected are screwed together

Dimensions:

• Body Connector Length: ⌀50 mm (1-31/32″)
• Shaft diameter: ⌀5 mm (13/64″)
• Inner Diameter: ⌀3.5 mm (9/64″)
• Screw head diameter: ⌀7 mm (9/32″)

For more dimensions and details, see technical drawing.

Material:

• The 7011905 one-piece connectors are made of robust steel

Included in delivery:

• 20 pieces of Confirmat 7011905 made of robust steel, galvanized

Manufacturer’s part numbers:

• Article identification number: 7011905
• EAN Number: 8432393117430

Manufacturer: EMUCA

Application:

Practical impact sleeve with waistband for furniture connections and much more.

The practical impact sleeve with collar 8035305, with internal thread M10 and wide collar is perfect for resilient and detachable connections in wood-based materials such as chipboard, MDF or multiplex.

Thanks to the circumferential grooves, the self-clinching nut with internal thread M10 offers 8035305 secure hold in the drill hole and is particularly easy to install – by pressing in or driving in lightly, without any special tools.

Advantages:
– Quick and safe assembly
– No damage to the workpiece due to external threads

– Ideal for removable furniture connections- Rust protection due to zinc
plating- Flange prevents slipping into the material

The impact sleeves are also suitable for repairs or retrofits on existing furniture.

The high-quality impact joints 8035305 are perfect for, among other things:

• Shelving system
• Bed
• Carcass furniture
• DIY project with wooden panels
• Living room furniture
• Office furniture
• Furniture Connections

Technical details:

• Weight: 12.05 g
• Size: 22 mm (55/64″)
• M10
• Easy installation, practical, stable
• Female thread: M10
• The socket is available in three thread variants: M6, M8 and M10
• With wide flange for high pull-out strength
• galvanized
• Steel
• robust
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• Self-clinching nut with internal thread M10 8035305 is for press-fitting or driving in
• To mount the impact sleeve, a hole with a diameter of ⌀12.5 mm (31/64″) must be drilled (for more details, see assembly drawing)

Dimensions:

• Outer Diameter Collar: ⌀22 mm (55/64″)
• Outer diameter of socket: ⌀12.5 mm (31/64″)
• Overall Length: 19 mm (3/4″)

For more dimensions and details, see technical drawing.

Material:

• The impact sleeves 8035305 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 20 pieces press-fit nut with internal thread M10 8035305 made of robust steel, galvanized

Manufacturer’s part numbers:

• Article ID: 8035305
• EAN number: 8432393120010

Manufacturer: EMUCA

Application:

Practical impact sleeve with waistband for furniture connections and much more.

The practical impact sleeve with collar 8029105, with internal thread M8 and wide collar is perfect for resilient and detachable connections in wood-based materials such as chipboard, MDF or multiplex.

Thanks to the circumferential grooves, the self-clinching nut with internal thread M8 offers 8029105 secure hold in the drill hole and is particularly easy to install – by pressing in or driving it in lightly, without any special tools.

Advantages:
– Quick and safe assembly
– No damage to the workpiece due to external threads

– Ideal for removable furniture connections- Rust protection due to zinc
plating- Flange prevents slipping into the material

The impact sleeves are also suitable for repairs or retrofits on existing furniture.

The high-quality impact sleeves 8029105 are perfect for, among other things:

• Shelving system
• Bed
• Carcass furniture
• DIY project with wooden panels
• Living room furniture
• Office furniture
• Furniture Connections

Technical details:

• Weight: 8.7 g
• Size: 20 mm (25/32″)
• Easy installation, practical, stable
• Female thread: M8
• The socket is available in three thread variants: M6, M8 and M10
• With wide flange for high pull-out strength
• galvanized
• Steel
• robust
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• Press-fit nut with internal thread M8 8029105 is for press-fitting or driving
• To install the impact sleeve, a hole with a diameter of ⌀10.7 mm (27/64″) must be drilled (for further details, see assembly drawing)

Dimensions:

• Outer Diameter Collar: ⌀20 mm (25/32″)
• Outer diameter of socket: ⌀10.7 mm (27/64″)
• Overall Length: 18 mm (45/64″)

For more dimensions and details, see technical drawing.

Material:

• The impact sleeves 8029105 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 20 pieces press-fit nut with internal thread M8 8029105 made of robust steel, galvanized

Manufacturer’s part numbers:

• Item ID: 8029105
• EAN number: 8432393119786

Manufacturer: EMUCA