Swivel flap fitting (ONLY the left side) with opening support and adjustable closing damping, incl. grey cover cap.

To replace or repair an already installed GRASS Hetal Kinvaro S-35 Type 4 / D flap fitting in a kitchen (e.g. for some models from the manufacturer Nobilia Küchen).

This right Kinvaro S-35, Type 4 / D swivel flap fitting replaces the original fitting 1:1 and restores the complete function of the existing swing flap.

Thanks to identical dimensions and drilling patterns, it can be mounted on the body or front without reworking.

The integrated opening support and soft-close damping then again ensure quiet, controlled opening and closing.

An economical and environmentally friendly solution when only one side of the flap fitting is defective and the other side is functional.

Properties:

• Allows the use of wreath profiles, gallery floors and countertop luminaires
• Flap is securely held in any position from an opening angle of 45°
• Particularly easy movement sequence
• The spring force is adjustable
• Built-in adjustable closing damping
• Wide range of applications for a wide variety of flap materials

Assembly:

• Fast, tool-free clip mounting of the front
• Pre-assembled Euro screws and positioning pins for easy mounting of the fitting on the side wall
• After the front has been clipped in, the spring force is fine-tuned with a Torx wrench

Three-dimensional adjustment of the flap by direct adjustment:

• Height adjustment: ±1.5 mm
• Side adjustment: ±1.5 mm
• Tilt adjustment: ±1.5 mm

The scope of delivery includes:

• 1 piece flap fitting, left side
• 1 piece cover cap, grey, left side

Please choose the right power accumulator!

We will be happy to help you make the right choice.

Made by GRASS in Germany

Download installation instructions for GRASS Kinvaro S-35 flap fittings!

Download the adjustment instructions for the GRASS Kinvaro S-35 flap fitting!

Watch installation videos for GRASS Kinvaro S-35 flap fittings!

Download the information brochure for GRASS Kinvaro flap fittings!

Download the GRASS Kinvaro flap fittings product catalogue!

Download CAD data for GRASS Kinvaro S-35 flap fittings!

Manufacturer:
GRASS GmbH

Application:

Swivel flap fitting (ONLY the right side) with opening support and adjustable closing damping, incl. grey cover cap.

To replace or repair an already installed GRASS Hetal Kinvaro S-35 Type 4 / D flap fitting in a kitchen (e.g. for some models from the manufacturer Nobilia Küchen).

This right Kinvaro S-35, Type 4 / D swivel flap fitting replaces the original fitting 1:1 and restores the complete function of the existing swing flap.

Thanks to identical dimensions and drilling patterns, it can be mounted on the body or front without reworking.

The integrated opening support and soft-close damping then again ensure quiet, controlled opening and closing.

An economical and environmentally friendly solution when only one side of the flap fitting is defective and the other side is functional.

Properties:

• Allows the use of wreath profiles, gallery floors and countertop luminaires
• Flap is securely held in any position from an opening angle of 45°
• Particularly easy movement sequence
• The spring force is adjustable
• Built-in adjustable closing damping
• Wide range of applications for a wide variety of flap materials

Assembly:

• Fast, tool-free clip mounting of the front
• Pre-assembled Euro screws and positioning pins for easy mounting of the fitting on the side wall
• After the front has been clipped in, the spring force is fine-tuned with a Torx wrench

Three-dimensional adjustment of the flap by direct adjustment:

• Height adjustment: ±1.5 mm
• Side adjustment: ±1.5 mm
• Tilt adjustment: ±1.5 mm

The scope of delivery includes:

• 1 piece fitting, right side
• 1 piece cover cap, grey, right side

Please choose the right power accumulator!

We will be happy to help you choose the right spare part.

Download installation instructions for GRASS Kinvaro S-35 flap fittings!

Download the adjustment instructions for the GRASS Kinvaro S-35 flap fitting!

Watch installation videos for GRASS Kinvaro S-35 flap fittings!

Download the information brochure for GRASS Kinvaro flap fittings!

Download the GRASS Kinvaro flap fittings product catalogue!

Download CAD data for GRASS Kinvaro S-35 flap fittings!

Manufacturer:
GRASS GmbH

Swivel flap fitting with opening support and adjustable closing damping, with grey cover caps

Properties:

• Allows the use of wreath profiles, gallery floors and countertop luminaires
• Flap is securely held in any position from an opening angle of 45°
• Particularly easy movement sequence
• The spring force is adjustable
• Built-in adjustable closing damping
• Wide range of applications for a wide variety of flap materials
• Pre-assembled Euro screws and positioning pins for easy mounting of the fitting on the side wall
• Fast, tool-free clip mounting of the front

3-dimensional adjustment of the flap by direct adjustment:

• Height adjustment: ±1.5 mm
• Side adjustment: ±1.5 mm
• Tilt adjustment: ±1.5 mm

The scope of delivery includes:

• 2 x fittings (1 x right and 1 x left)
• 2 x cover caps (1 x right and 1 x left)

Please choose the right power accumulator!

We will be happy to help you make the right choice.

Made by GRASS in Germany

Download installation instructions for GRASS Kinvaro S-35 flap fittings!

Download the adjustment instructions for the GRASS Kinvaro S-35 flap fitting!

Watch installation videos for GRASS Kinvaro S-35 flap fittings!

Download the information brochure for GRASS Kinvaro flap fittings!

Download the GRASS Kinvaro flap fittings product catalogue!

Download CAD data for GRASS Kinvaro S-35 flap fittings!

Manufacturer:
GRASS GmbH

Application:

Draw-wire flap holder for bar compartment, bar compartment flap and much more.

The bar compartment flap holder 1009521 (cable pull holder) is a modern cable hoist fitting for flap weights up to max. 4 kg and comes with the matching cover cap in white.

The flap fitting with cable pull for furniture flaps and bar compartments 1009521 can be installed not only horizontally, but also vertically, which means that it can also be used for cabinets with a depth of 180 mm (7-3/32″).

The opening angle can be conveniently adjusted with the screwdriver.

The high-quality bar compartment flap holders 1009521 have a simple and modern design and are perfect for, among other things:

• Flap
• Switchboard
• Bar compartment
• Bar compartment flap

Technical details:

• Weight: 335 g
• Load capacity (load capacity): 4 kg
• Size: 162 mm (6-3/8″)
• for flaps weighing up to 4 kg
• for flaps with heights from 200 mm (7-7/8″) to 480 mm (18-57/64″)
• for horizontal installation: for clear carcase depth from 180 mm (7-3/32″)
• for vertical installation: for clear carcase depth from 82 mm (3-15/64″)
• Can be used on the right and left
• Available in three colours: black, white and grey
• for wooden flaps
• Incl. Cap
• Incl. Bolts
• with adjustable opening angle
• with soft-close damping and self-closing
• Easy and quick installation
• white
• robust
• high brand quality from UMAXO®

Surface:

• White

Assembly:

• The fastening is done with the help of the screws included in the scope of delivery
• The bar compartment flap holders 1009521 can be mounted both horizontally and vertically
• To install the draw-wire flap holder, six holes must be drilled in the body wall
• To attach the rope to the flap, two mounting holes for the flap adapter must be drilled there
• The braking force of the soft-close damper can be adjusted (for more details see
  assembly drawing
  )

Dimensions:

• Length of the draw-wire flap holder: 162 mm (6-3/8″)
• Width: 91 mm (3-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details, see technical drawing.

Material:

• The bar compartment flap holders 1009521 are made of metal and robust plastic

Included in delivery:

• 1 piece bar compartment flap holder 1009521 made of metal and robust plastic, 1 piece cover cap, colour: white
• 6 pieces mounting screw
• 1 piece flap adapter for flap attachment

Watch the product video:

Additional information:

• • Download assembly instructions

Manufacturer’s part numbers:

• • • Article ID: 1009521
    • EAN number: 8432393100562, 8432393100616

Manufacturer: EMUCA

Application:

Draw-wire flap holder for bar compartment, bar compartment flap and much more.

Ideal for bar compartments in home and office furniture when soft opening and secure, automatic closing are desired.

The bar compartment flap holder 1009521 (cable pull holder) is a modern cable hoist fitting for flap weights up to max. 4 kg and comes with the matching cover cap in grey.

The flap fitting with cable pull for furniture flaps and bar compartments 1009521 can be installed not only horizontally, but also vertically, which means that it can also be used for cabinets with a depth of 180 mm (7-3/32″).

The opening angle can be conveniently adjusted with the screwdriver.

The high-quality bar compartment flap holders 1009521 have a simple and modern design and are perfect for, among other things:

• Flap
• Switchboard
• Bar compartment
• Bar compartment flap

Technical details:

• Weight: 335 g
• Load capacity (load capacity): 4 kg
• Size: 162 mm (6-3/8″)
• for flaps weighing up to 4 kg
• for flaps with heights from 200 mm (7-7/8″) to 480 mm (18-57/64″)
• for horizontal installation: for clear carcase depth from 180 mm (7-3/32″)
• for vertical installation: for clear carcase depth from 82 mm (3-15/64″)
• Can be used on the right and left
• Available in three colours: black, white and grey
• for wooden flaps
• Incl. Cap
• Incl. Bolts
• with adjustable opening angle
• with soft-close damping and self-closing
• Easy and quick installation
• grey
• robust
• high brand quality from UMAXO®

Surface:

• Grey

Assembly:

• The fastening is done with the help of the screws included in the scope of delivery
• The bar compartment flap holders 1009521 can be mounted both horizontally and vertically
• To install the draw-wire flap holder, six holes must be drilled in the body wall
• To attach the rope to the flap, two mounting holes for the flap adapter must be drilled there
• The braking force of the soft-close damper can be adjusted (for more details see
  assembly drawing
  )

Dimensions:

• Length of the draw-wire flap holder: 162 mm (6-3/8″)
• Width: 91 mm (3-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details, see technical drawing.

Material:

• The bar compartment flap holders 1009521 are made of metal and robust plastic

Included in delivery:

• 1 piece bar compartment flap holder 1009521 made of metal and robust plastic, 1 piece cover cap, colour: grey
• 6 pieces mounting screw
• 1 piece flap adapter for flap attachment

Watch the product video:

Additional information:

• • Download assembly instructions

Manufacturer’s part numbers:

• • • Article ID: 1009521
    • EAN number: 8432393100562, 8432393100630

Manufacturer: EMUCA

Application:

Draw-wire flap holder for bar compartment, bar compartment flap and much more.

The bar compartment flap holder 1009521 (cable pull holder) is a modern cable hoist fitting for flap weights up to max. 4 kg and comes with the matching cover cap in black.

The flap fitting with cable pull for furniture flaps and bar compartments 1009521 can be installed not only horizontally, but also vertically, which means that it can also be used for cabinets with a depth of 180 mm (7-3/32″).

The opening angle can be conveniently adjusted with the screwdriver.

The high-quality bar compartment flap holders 1009521 have a simple and modern design and are perfect for, among other things:

• Flap
• Switchboard
• Bar compartment
• Bar compartment flap

Technical details:

• Weight: 335 g
• Load capacity (load capacity): 4 kg
• Size: 162 mm (6-3/8″)
• for flaps weighing up to 4 kg
• for flaps with heights from 200 mm (7-7/8″) to 480 mm (18-57/64″)
• for horizontal installation: for clear carcase depth from 180 mm (7-3/32″)
• for vertical installation: for clear carcase depth from 82 mm (3-15/64″)
• Can be used on the right and left
• Available in three colours: black, white and grey
• for wooden flaps
• Incl. Cap
• Incl. Bolts
• with adjustable opening angle
• with soft-close damping and self-closing
• Easy and quick installation
• black
• robust
• high brand quality from UMAXO®

Surface:

• Black

Assembly:

• The fastening is done with the help of the screws included in the scope of delivery
• The bar compartment flap holders 1009521 can be mounted both horizontally and vertically
• To install the draw-wire flap holder, six holes must be drilled in the body wall
• To attach the rope to the flap, two mounting holes for the flap adapter must be drilled there
• The braking force of the soft-close damper can be adjusted (for more details see
  assembly drawing
  )

Dimensions:

• Length of the draw-wire flap holder: 162 mm (6-3/8″)
• Width: 91 mm (3-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details, see technical drawing.

Material:

• The bar compartment flap holders 1009521 are made of metal and robust plastic

Included in delivery:

• 1 piece bar compartment flap holder 1009521 made of metal and robust plastic, 1 piece cover cap, colour: black
• 6 pieces mounting screw
• 1 piece flap adapter for flap attachment

Watch the product video:

Additional information:

• • Download assembly instructions

Manufacturer’s part numbers:

• • • Article ID: 1009521
    • EAN number: 8432393100562

Manufacturer: EMUCA

Usage:

Zinc alloy bar compartment hinge for wooden flaps, furniture flaps, wooden lids, bar compartment and much more.

Furniture hinge for screwing, flap holder, inlet folding hinge, bar compartment hinge for wooden flaps, wooden lid and furniture flaps.

Stable installation and tight fit thanks to two fastening screws in the bottom and flap sections.

The flap hinges have a rectangular shape, and a modern design.

They feature a zamak cover that covers the adjustment screw and locking screw for an impeccable look

Subsequent flap installation is possible due to separate assembly of the bottom and flap sections.

The flap hinges have three-dimensional adjustment options: lateral, vertical and frontal.

Only for use with flap support or lid holder.

• Living room furniture
• Office furniture
• Wooden flaps
• Furniture flaps
• Wooden lid
• Bar compartment

Technical details:

• Weight: 72.1 g
• Size: 54 mm (2.2″)
• Beam Angle: 90°
• Bore: Ø26 mm (1-1/32″)
• Drilling depth: 14 mm (35/64″) and 15 mm (19/32″)
• Removable
• Stable
• Massive
• Robust
• Grey
• High brand quality from UMAXO®

Surface:

• Grey

Assembly:

• The inlet hinged hinge 1010821 for inlet in consists of two parts: bottom part and flap part
• Before installation, mounting holes with a diameter of Ø26 mm (1-1/32″) must be pre-drilled in the flap and in the bottom of the body
• The distance between the center of the drill holes and the edge must be 26 mm (1-1/32″)
• The depth of the mounting hole in the bottom part is at least 14 mm (35/64″)
• The depth of the mounting hole in the flap section is at least 15 mm (19/32″)
• The two parts of the flap hinge are inserted into the pre-drilled mounting holes and fastened with the screws (not included)
• At least two flap hinges are 1010821 necessary for attaching a compartment flap (for further details see
  assembly drawing
  )

Dimensions:

• The complete length of the flap hinge (mounted): 54 mm (2-1/8″)
• Width: 38 mm (1-1/2″)
• The distance between screw holes: 27 mm (1-1/16″)
• Mounting pin length: 14 mm (35/64″)

For more dimensions and details, see technical drawing.

Manufacture:

• The high-quality flap hinges 1010821 are made of solid zinc alloy (ZDC)

Included in delivery:

• Two pieces of flap hinge 1010821 made of solid zinc alloy (consisting of flap part and body part), grey
• Two die-cast zinc cover caps for the adjustment screws
• Two pieces plastic cover cap for flap part
• Two pieces plastic cover cap for carcass part

Manufacturer’s part numbers:

• Item Identification Number: 1010821
• EAN number: 8432393100715

Manufacturer: EMUCA

Usage:

Zinc alloy bar compartment hinge for wooden flaps, furniture flaps, wooden lids, bar compartment and much more.

Furniture hinge for screwing, flap holder, inlet folding hinge, bar compartment hinge for wooden flaps, wooden lid and furniture flaps.

Stable installation and tight fit thanks to two fastening screws in the bottom and flap sections.

The flap hinges have a rectangular shape, and a modern design.

They feature a zamak cover that covers the adjustment screw and locking screw for an impeccable look

Subsequent flap installation is possible due to separate assembly of the bottom and flap sections.

The flap hinges have three-dimensional adjustment options: lateral, vertical and frontal.

Only for use with flap support or lid holder.

• Living room furniture
• Office furniture
• Wooden flaps
• Furniture flaps
• Wooden lid
• Bar compartment

Technical details:

• Weight: 72.1 g
• Size: 54 mm (2.2″)
• Beam Angle: 90°
• Bore: Ø26 mm (1-1/32″)
• Drilling depth: 14 mm (35/64″) and 15 mm (19/32″)
• Removable
• Stable
• Massive
• Robust
• Black
• High brand quality from UMAXO®

Surface:

• Black

Assembly:

• The inlet hinged hinge 1010817 for inlet in consists of two parts: bottom part and flap part
• Before installation, mounting holes with a diameter of Ø26 mm (1-1/32″) must be pre-drilled in the flap and in the bottom of the body
• The distance between the center of the drill holes and the edge must be 26 mm (1-1/32″)
• The depth of the mounting hole in the bottom part is at least 14 mm (35/64″)
• The depth of the mounting hole in the flap section is at least 15 mm (19/32″)
• The two parts of the flap hinge are inserted into the pre-drilled mounting holes and fastened with the screws (not included)
• At least two flap hinges are 1010817 necessary for attaching a compartment flap (for further details see
  assembly drawing
  )

Dimensions:

• The complete length of the flap hinge (mounted): 54 mm (2-1/8″)
• Width: 38 mm (1-1/2″)
• The distance between screw holes: 27 mm (1-1/16″)
• Mounting pin length: 14 mm (35/64″)

For more dimensions and details, see technical drawing.

Manufacture:

• The high-quality flap hinges 1010817 are made of solid zinc alloy (ZDC)

Included in delivery:

• 2 pieces flap hinge 1010817 made of solid zinc alloy (consisting of flap part and body part), black
• 2 pieces cover cap made of die-cast zinc for the adjustment screws
• 2 pieces plastic cover cap for flap part
• 2 pieces plastic cover cap for body part

Manufacturer’s part numbers:

• Item identification number: 1010817
• EAN number: 8432393100708

Manufacturer: EMUCA

Usage:

Zinc alloy bar compartment hinge for wooden flaps, furniture flaps, wooden lids, bar compartment and much more.

Furniture hinge for screwing, flap holder, inlet folding hinge, bar compartment hinge for wooden flaps, wooden lid and furniture flaps.

Stable installation and tight fit thanks to two fastening screws in the bottom and flap sections.

The flap hinges have a rectangular shape, and a modern design.

They feature a zamak cover that covers the adjustment screw and locking screw for an impeccable look

Subsequent flap installation is possible due to separate assembly of the bottom and flap sections.

The flap hinges have three-dimensional adjustment options: lateral, vertical and frontal.

Only for use with flap support or lid holder.

• Living room furniture
• Office furniture
• Wooden flaps
• Furniture flaps
• Wooden lid
• Bar compartment

Technical details:

• Weight: 72.1 g
• Size: 54 mm (2.2″)
• Beam Angle: 90°
• Bore: Ø26 mm (1-1/32″)
• Drilling depth: 14 mm (35/64″) and 15 mm (19/32″)
• Removable
• Stable
• Massive
• Robust
• White
• High brand quality from UMAXO®

Surface:

• White

Assembly:

• The inlet hinge 1010815 for inlet in consists of two parts: bottom part and flap part
• Before installation, mounting holes with a diameter of Ø26 mm (1-1/32″) must be pre-drilled in the flap and in the bottom of the body
• The distance between the center of the drill holes and the edge must be 26 mm (1-1/32″)
• The depth of the mounting hole in the bottom part is at least 14 mm (35/64″)
• The depth of the mounting hole in the flap section is at least 15 mm (19/32″)
• The two parts of the flap hinge are inserted into the pre-drilled mounting holes and fastened with the screws (not included)
• At least two flap hinges are 1010815 necessary for attaching a compartment flap (for further details see
  assembly drawing
  )

Dimensions:

• The complete length of the flap hinge (mounted): 54 mm (2-1/8″)
• Width: 38 mm (1-1/2″)
• The distance between screw holes: 27 mm (1-1/16″)
• Mounting pin length: 14 mm (35/64″)

For more dimensions and details, see technical drawing.

Manufacture:

• The high-quality flap hinges 1010815 are made of solid zinc alloy (ZDC)

Included in delivery:

• 2 pieces flap hinge 1010815 made of solid zinc alloy (consisting of flap part and body part), white
• 2 pieces cover cap made of die-cast zinc for the adjustment screws
• 2 pieces plastic cover cap for flap part
• 2 pieces plastic cover cap for body part

Manufacturer’s part numbers:

• Product identification number: 1010815
• EAN number: 8432393100692

Manufacturer: EMUCA

Usage:

Zinc alloy bar compartment hinge for wooden flaps, furniture flaps, wooden lids, bar compartment and much more.

Furniture hinge for screwing, flap holder, inlet folding hinge, bar compartment hinge for wooden flaps, wooden lid and furniture flaps.

Stable installation and tight fit thanks to two fastening screws in the bottom and flap sections.

The flap hinges have a rectangular shape, and a modern design.

They feature a zamak cover that covers the adjustment screw and locking screw for an impeccable look

Subsequent flap installation is possible due to separate assembly of the bottom and flap sections.

The flap hinges have three-dimensional adjustment options: lateral, vertical and frontal.

Only for use with flap support or lid holder.

• Living room furniture
• Office furniture
• Wooden flaps
• Furniture flaps
• Wooden lid
• Bar compartment

Technical details:

• Weight: 72 g
• Size: 54 mm (2.2″)
• Beam Angle: 90°
• Bore: Ø26 mm (1-1/32″)
• Drilling depth: 14 mm (35/64″) and 15 mm (19/32″)
• Removable
• Stable
• Massive
• Robust
• Nickel-plated
• High brand quality from UMAXO®

Surface:

• Nickel-plated

Assembly:

• The inlet hinge 1010707 for inlet in consists of two parts: bottom part and flap part
• Before installation, mounting holes with a diameter of Ø26 mm (1-1/32″) must be pre-drilled in the flap and in the bottom of the body
• The distance between the center of the drill holes and the edge must be 26 mm (1-1/32″)
• The depth of the mounting hole in the bottom part is at least 14 mm (35/64″)
• The depth of the mounting hole in the flap section is at least 15 mm (19/32″)
• The two parts of the flap hinge are inserted into the pre-drilled mounting holes and fastened with the screws (not included)
• At least two flap hinges are 1010707 necessary for attaching a compartment flap (for further details see
  assembly drawing
  )

Dimensions:

• The complete length of the flap hinge (mounted): 54 mm (2-1/8″)
• Width: 38 mm (1-1/2″)
• The distance between screw holes: 27 mm (1-1/16″)
• Mounting pin length: 14 mm (35/64″)

For more dimensions and details, see technical drawing.

Manufacture:

• The high-quality flap hinges 1010707 are made of solid zinc alloy (ZDC)

Included in delivery:

• Two pieces of flap hinge 1010707 made of solid zinc alloy (consisting of key part and body part), nickel-plated
• Two die-cast zinc cover caps for the adjustment screws

Manufacturer’s part numbers:

• Product identification number: 1010707
• EAN number: 8432393100685

Manufacturer: EMUCA