Flap support https://umaxo.com UMAXO Wed, 11 Feb 2026 04:00:14 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.4 https://umaxo.com/wp-content/uploads/2023/02/cropped-230208-umaxo-logo-s-1-32x32.jpg Flap support https://umaxo.com 32 32 Stopper LGB30-ST for guide block LGB-30CM, by Sugatsune / LAMP (Japan) https://umaxo.com/produkt/stopper-lgb30-st-for-guide-block-lgb-30cm-by-sugatsune-lamp-japan/ Wed, 11 Feb 2026 04:00:14 +0000 https://umaxo.de/produkt/stopper-lgb30-st-for-guide-block-lgb-30cm-by-sugatsune-lamp-japan/ Stopper LGB30-ST (190-036-127) for guide block LGB-30CM, by Sugatsune / LAMP (Japan)

Application:

Prevents detachment of the LGB-30CM guide block.

Mounting on the LGB30 guide rail with screws. Mounting screws are not included.

Stopper LGB30-ST (190-036-127) for guide block LGB-30CM, application example
Stopper LGB30-ST (190-036-127) for guide block LGB-30CM, application example

 

Weight: 5.6 g

Manufacturer’s reference number:

  • Item ID: LGB30-ST
  • Item number: 190-036-127
  • GTIN number (EAN, UPS): 4510932173254

Included in delivery:

  • 1 Piece Stopper LGB30-ST

Further information:

Manufacturer: von Sugatsune / LAMP® (Japan)

SUGATSUNE, The manufacturer of the brand LAMP®.

]]> GRASS Hetal Kinvaro S-35 Type 4 / D, power accumulator D (ONLY the left side). Swivel flap fitting with opening support and adjustable closing damping. Flap fitting incl. grey cover cap https://umaxo.com/produkt/grass-hetal-kinvaro-s-35-type-4-d-accumulator-d-only-left-side-swivel-flap-fitting-with-opening-support-and-adjustable-closing-flap-fitting-incl-grey-coverka/ Fri, 14 Nov 2025 13:00:39 +0000 https://umaxo.de/produkt/grass-hetal-kinvaro-s-35-type-4-d-power-accumulator-d-only-the-left-side-swivel-flap-fitting-with-opening-support-and-adjustable-closing-damping-flap-fitting-incl-grey-cover-cap/ GRASS Hetal Kinvaro S-35 “Type 4 / D, Kraftspeicher D”, left only

Swivel flap fitting (ONLY the left side) with opening support and adjustable closing damping, incl. grey cover cap.

To replace or repair an already installed GRASS Hetal Kinvaro S-35 Type 4 / D flap fitting in a kitchen (e.g. for some models from the manufacturer Nobilia Küchen).

This right Kinvaro S-35, Type 4 / D swivel flap fitting replaces the original fitting 1:1 and restores the complete function of the existing swing flap.

Thanks to identical dimensions and drilling patterns, it can be mounted on the body or front without reworking.

The integrated opening support and soft-close damping then again ensure quiet, controlled opening and closing.

An economical and environmentally friendly solution when only one side of the flap fitting is defective and the other side is functional.

Properties:

  • Allows the use of wreath profiles, gallery floors and countertop luminaires
  • Flap is securely held in any position from an opening angle of 45°
  • Particularly easy movement sequence
  • The spring force is adjustable
  • Built-in adjustable closing damping
  • Wide range of applications for a wide variety of flap materials

Assembly:

  • Fast, tool-free clip mounting of the front
  • Pre-assembled Euro screws and positioning pins for easy mounting of the fitting on the side wall
  • After the front has been clipped in, the spring force is fine-tuned with a Torx wrench

Three-dimensional adjustment of the flap by direct adjustment:

  • Height adjustment: ±1.5 mm
  • Side adjustment: ±1.5 mm
  • Tilt adjustment: ±1.5 mm

The scope of delivery includes:

  • 1 piece flap fitting, left side
  • 1 piece cover cap, grey, left side

Please choose the right power accumulator!

We will be happy to help you make the right choice.

Made by GRASS in Germany

Download installation instructions for GRASS Kinvaro S-35 flap fittings!

Download the adjustment instructions for the GRASS Kinvaro S-35 flap fitting!

Watch installation videos for GRASS Kinvaro S-35 flap fittings!

Download the information brochure for GRASS Kinvaro flap fittings!

Download the GRASS Kinvaro flap fittings product catalogue!

Download CAD data for GRASS Kinvaro S-35 flap fittings!

Manufacturer:
GRASS GmbH

]]> Kinvaro S-35 Type 4 / D, Kraftspeicher D (ONLY the right side) from the manufacturer GRASS (Hetal). Swivel flap fitting with opening support and adjustable closing damping. Flap fitting incl. grey cover cap https://umaxo.com/produkt/grass-hetal-kinvaro-s-35-type-4-d-accumulator-d-only-the-right-side-swivel-flap-fitting-with-opening-support-and-adjustable-closing-flap-fitting-incl-grey-cover/ Fri, 14 Nov 2025 13:00:37 +0000 https://umaxo.de/produkt/grass-hetal-kinvaro-s-35-type-4-d-power-accumulator-d-only-the-right-side-swivel-flap-fitting-with-opening-support-and-adjustable-closing-damping-flap-fitting-incl-grey-cover-cap/ Kinvaro S-35, Type 4 / D, Kraftspeicher D, from the manufacturer GRASS or Hetal

Application:

Swivel flap fitting (ONLY the right side) with opening support and adjustable closing damping, incl. grey cover cap.

To replace or repair an already installed GRASS Hetal Kinvaro S-35 Type 4 / D flap fitting in a kitchen (e.g. for some models from the manufacturer Nobilia Küchen).

This right Kinvaro S-35, Type 4 / D swivel flap fitting replaces the original fitting 1:1 and restores the complete function of the existing swing flap.

Thanks to identical dimensions and drilling patterns, it can be mounted on the body or front without reworking.

The integrated opening support and soft-close damping then again ensure quiet, controlled opening and closing.

An economical and environmentally friendly solution when only one side of the flap fitting is defective and the other side is functional.

Properties:

  • Allows the use of wreath profiles, gallery floors and countertop luminaires
  • Flap is securely held in any position from an opening angle of 45°
  • Particularly easy movement sequence
  • The spring force is adjustable
  • Built-in adjustable closing damping
  • Wide range of applications for a wide variety of flap materials

Assembly:

  • Fast, tool-free clip mounting of the front
  • Pre-assembled Euro screws and positioning pins for easy mounting of the fitting on the side wall
  • After the front has been clipped in, the spring force is fine-tuned with a Torx wrench

Three-dimensional adjustment of the flap by direct adjustment:

  • Height adjustment: ±1.5 mm
  • Side adjustment: ±1.5 mm
  • Tilt adjustment: ±1.5 mm

The scope of delivery includes:

  • 1 piece fitting, right side
  • 1 piece cover cap, grey, right side

Please choose the right power accumulator!

We will be happy to help you choose the right spare part.

Download installation instructions for GRASS Kinvaro S-35 flap fittings!

Download the adjustment instructions for the GRASS Kinvaro S-35 flap fitting!

Watch installation videos for GRASS Kinvaro S-35 flap fittings!

Download the information brochure for GRASS Kinvaro flap fittings!

Download the GRASS Kinvaro flap fittings product catalogue!

Download CAD data for GRASS Kinvaro S-35 flap fittings!

Manufacturer:
GRASS GmbH

]]> GRASS Hetal Kinvaro S-35 Type 4 / D, power accumulator D. Swivel flap fitting with opening support and adjustable closing damping. Flap fitting with grey cover caps https://umaxo.com/produkt/grass-hetal-kinvaro-s-35-type-4-d-accumulator-d-swivel-flap-fitting-with-opening-support-and-adjustable-closing-flap-fitting-with-grey-cover-caps/ Fri, 14 Nov 2025 13:00:10 +0000 https://umaxo.de/produkt/grass-hetal-kinvaro-s-35-type-4-d-power-accumulator-d-swivel-flap-fitting-with-opening-support-and-adjustable-closing-damping-flap-fitting-with-grey-cover-caps/ GRASS Hetal Kinvaro S-35 “Type 4 / D, power accumulator D”

Swivel flap fitting with opening support and adjustable closing damping, with grey cover caps

Properties:

  • Allows the use of wreath profiles, gallery floors and countertop luminaires
  • Flap is securely held in any position from an opening angle of 45°
  • Particularly easy movement sequence
  • The spring force is adjustable
  • Built-in adjustable closing damping
  • Wide range of applications for a wide variety of flap materials
  • Pre-assembled Euro screws and positioning pins for easy mounting of the fitting on the side wall
  • Fast, tool-free clip mounting of the front

3-dimensional adjustment of the flap by direct adjustment:

  • Height adjustment: ±1.5 mm
  • Side adjustment: ±1.5 mm
  • Tilt adjustment: ±1.5 mm

The scope of delivery includes:

  • 2 x fittings (1 x right and 1 x left)
  • 2 x cover caps (1 x right and 1 x left)

Please choose the right power accumulator!

We will be happy to help you make the right choice.

Made by GRASS in Germany

Download installation instructions for GRASS Kinvaro S-35 flap fittings!

Download the adjustment instructions for the GRASS Kinvaro S-35 flap fitting!

Watch installation videos for GRASS Kinvaro S-35 flap fittings!

Download the information brochure for GRASS Kinvaro flap fittings!

Download the GRASS Kinvaro flap fittings product catalogue!

Download CAD data for GRASS Kinvaro S-35 flap fittings!

Manufacturer:
GRASS GmbH

]]> High-quality bar compartment flap holder with soft-close damper and self-closing mechanism, incl. Cover cap and fastening screws, load capacity: 4 kg, surface: grey, 1009521. Draw-wire flap holder for bar compartment, bar compartment flap and much more, by EMUCA https://umaxo.com/produkt/high-quality-bar-compartment-flap-holder-with-soft-close-damper-and-self-closing-mechanism-incl-cover-cap-and-fastening-screws-load-capacity-4-kg-surface-grey-1009521-pull-wire-flap-holder-for/ Tue, 04 Nov 2025 18:00:38 +0000 https://umaxo.de/produkt/high-quality-bar-compartment-flap-holder-with-soft-close-damper-and-self-closing-mechanism-incl-cover-cap-and-fastening-screws-load-capacity-4-kg-surface-grey-1009521-pull-wire-flap-holder-for/ Bar compartment flap holder with soft-close damper and self-closing, for flaps with heights from 200 mm (7-7/8″) to 480 mm (18-57/64″) and flap weight up to 4 kg, made of metal and robust plastic, surface: grey, 1009521

Application:

Draw-wire flap holder for bar compartment, bar compartment flap and much more.

Ideal for bar compartments in home and office furniture when soft opening and secure, automatic closing are desired.

High-quality bar compartment flap holder with soft-close damper and self-closing, incl. cover cap and fastening screws, by EMUCA, load capacity: 4 kg, grey. Application example for vertical mounting
High-quality bar compartment flap holder with soft-close damper and self-closing mechanism, incl. Cover cap and mounting screws, from EMUCA, load capacity: 4 kg, grey. Application example for vertical mounting

 

The bar compartment flap holder 1009521 (cable pull holder) is a modern cable hoist fitting for flap weights up to max. 4 kg and comes with the matching cover cap in grey.

The flap fitting with cable pull for furniture flaps and bar compartments 1009521 can be installed not only horizontally, but also vertically, which means that it can also be used for cabinets with a depth of 180 mm (7-3/32″).

High-quality bar compartment flap holder with soft-close damper and self-closing, incl. cover cap and fastening screws, by EMUCA, load capacity: 4 kg, grey. Application example for horizontal mounting
High-quality bar compartment flap holder with soft-close damper and self-closing mechanism, incl. Cover cap and mounting screws, from EMUCA, load capacity: 4 kg, grey. Application example for horizontal mounting

 

The opening angle can be conveniently adjusted with the screwdriver.

High-quality bar compartment flap holder with soft-close damper and self-closing, incl. cover cap and fastening screws, by EMUCA, load capacity: 4 kg, grey. Adjustment options: opening angle and strength of the soft-close damping
High-quality bar compartment flap holder with soft-close damper and self-closing mechanism, incl. Cover cap and mounting screws, from EMUCA, load capacity: 4 kg, grey. Adjustment options: opening angle and strength of the soft-close damping

 

The high-quality bar compartment flap holders 1009521 have a simple and modern design and are perfect for, among other things:

  • Flap
  • Switchboard
  • Bar compartment
  • Bar compartment flap

Technical details:

  • Weight: 335 g
  • Load capacity (load capacity): 4 kg
  • Size: 162 mm (6-3/8″)
  • for flaps weighing up to 4 kg
  • for flaps with heights from 200 mm (7-7/8″) to 480 mm (18-57/64″)
  • for horizontal installation: for clear carcase depth from 180 mm (7-3/32″)
  • for vertical installation: for clear carcase depth from 82 mm (3-15/64″)
  • Can be used on the right and left
  • Available in three colours: black, white and grey
  • for wooden flaps
  • Incl. Cap
  • Incl. Bolts
  • with adjustable opening angle
  • with soft-close damping and self-closing
  • Easy and quick installation
  • grey
  • robust
  • high brand quality from UMAXO®

Surface:

  • Grey

Assembly:

  • The fastening is done with the help of the screws included in the scope of delivery
  • The bar compartment flap holders 1009521 can be mounted both horizontally and vertically
  • To install the draw-wire flap holder, six holes must be drilled in the body wall
  • To attach the rope to the flap, two mounting holes for the flap adapter must be drilled there
  • The braking force of the soft-close damper can be adjusted (for more details see
    assembly drawing
    )
High-quality bar compartment flap holder with soft-close damper and self-closing, incl. cover cap and fastening screws, by EMUCA, load capacity: 4 kg, grey. Assembly drawing
High-quality bar compartment flap holder with soft-close damper and self-closing mechanism, incl. Cover cap and mounting screws, from EMUCA, load capacity: 4 kg, grey. Assembly drawing

 

Dimensions:

  • Length of the draw-wire flap holder: 162 mm (6-3/8″)
  • Width: 91 mm (3-37/64″)
  • Depth: 20 mm (25/32″)
High-quality bar compartment flap holder with soft-close damper and self-closing mechanism, incl. cover cap and mounting screws, 162 mm, by EMUCA, grey. Technical Drawing
High-quality bar compartment flap holder with soft-close damper and self-closing mechanism, incl. Cover cap and mounting screws, 162 mm, by EMUCA, grey. Technical drawing

 

For more dimensions and details, see technical drawing.

Material:

  • The bar compartment flap holders 1009521 are made of metal and robust plastic

Included in delivery:

  • 1 piece bar compartment flap holder 1009521 made of metal and robust plastic, 1 piece cover cap, colour: grey
  • 6 pieces mounting screw
  • 1 piece flap adapter for flap attachment

Watch the product video:

Additional information:

Manufacturer’s part numbers:

      • Article ID: 1009521
      • EAN number: 8432393100562, 8432393100630

Manufacturer: EMUCA

EMUCA, where creation begins

]]> Compact high-quality flap hinge with opening angle limitation to approx. 95° made of brass, surface: chrome-plated, 45 mm (1.8″) B-51. Brass industrial hinge for electrical appliances, equipment, fixtures, enclosures and much more, by TAKIGEN (Japan) https://umaxo.com/produkt/compact-flap-hinge-opening-angle-limit-95-brass-surface-chrome-plated-45mm-b-51-industrial-hinge-brass-electrical-appliances-equipment-fixtures-housing-takigen-japan/ Tue, 14 Jan 2025 09:10:12 +0000 https://umaxo.de/produkt/compact-high-quality-flap-hinge-with-opening-angle-limitation-to-approx-95-made-of-brass-surface-chrome-plated-45-mm-1-8-b-51-brass-industrial-hinge-for-electrical-appliances-equipment/ Flap hinge made of solid and robust brass, surface: chrome-plated, B-51

Usage:

Industrial hinge made of brass for electrical appliances, systems, fixtures, housings and much more.

The industrial hinge B-51 has a built-in round limitation of the opening angle. This ensures that the flap or the door stops at approx. 95° when opened.

The B-51 flap hinges are suitable for flaps or doors up to 300 mm (11-13/16″) wide and up to 100 mm (3-15/16″) deep.

The weight of the door or flap must not exceed 3.6 kg.

The high-quality flap hinges B-51 have a unique design and are perfect for, among other things:

  • Laboratory equipment
  • Electrical appliances
  • Grounds
  • Devices
  • Case

Technical details:

  • Weight: 12 g
  • Load capacity: 3.6 kg
  • Size: 45 mm (1.8″)
  • Beam angle: approx. 95°
  • Elaborately processed
  • Stable
  • Robust
  • Chrome-plated
  • High brand quality from TAKIGEN®

Surface:

  • Chrome-plated

Assembly:

  • The industrial hinge B-51 is for screwing
  • The flap hinge has four mounting holes with a diameter of ⌀2.8 mm (7/64″)
  • The distance between the mounting holes is 21 mm (53/64″)

Dimensions:

  • Flap hinge length: 45 mm (1-49/64″)
  • Width: 30.5 mm (1-13/64″)
  • Depth: 9 mm (23/64″)
Compact high-quality flap hinge with opening angle limitation to approx. 95° made of brass, surface: chrome-plated, 45 mm, from TAKIGEN, B-51. Technical drawing

 

For further dimensions and details
see technical drawing
.

Manufacture:

  • The B-51 flap hinges are made of solid and sturdy brass

Included in delivery:

  • 1 piece flap hinge B-51 made of solid and robust brass, chrome-plated

Manufacturer’s part numbers:

  • Item identification number: 10148
  • Item number: B-51

Manufacturer: TAKIGEN (Japan)

Giving shape to your needs, TAKIGEN is your personal, private factory

]]>