Usage:

Wooden dowels 9094878 for wood panels, wood jointing, furniture making, shelf construction.

The high-quality long wood dowels 9094878 have a ribbed surface structure and, in combination with glue, connect wooden workpieces safely and reliably.

The long wood dowels are slightly sharpened at the ends so that they find an optimal hold in the dowel hole.

The ⌀10 mm (25/64″) x 40 mm (1-37/64″) beech wood dowel enables stable connections of wooden panels and other wooden workpieces that are invisible from the outside.

The glue can be optimally distributed on the surface.

The wooden dowel 9094878 is perfect for, among other things:

• Wooden panels
• Wood connection
• Furniture construction
• Shelving

Technical details:

• Weight: 2 g
• Length: 40 mm (1-37/64″)
• Reliable
• Stable
• Enables concealed timber joints without visible fasteners
• Robust
• Suitable for precisely fitting press and glue connections
• Corrugated
• High brand quality from UMAXO®

Surface:

• Corrugated

Assembly:

• For assembly, two holes with a diameter of ⌀10 mm (25/64″) must be pre-drilled on the two surfaces to be joined
• The depth of the holes must be 25/32″ (20 mm), which is half the length of the anchor. In this way, the surfaces can be optimally connected by pressing them together
• A suitable glue should be used for the wood connection, which should be added before pressing together

Dimensions:

• Length of the long wood anchor: 40 mm (1-37/64″)
• Diameter: ⌀10 mm (25/64″)

For more dimensions and details, see technical drawing.

Manufacture:

• The high-quality long wood dowels 9094878 are made of beech wood (wood)

Included in delivery:

• 10 long wood dowels 9094878 made of dried beech wood, corrugated

Manufacturer’s part numbers:

• Item Identification Number: 9094878
• EAN number: 8432393124513

Manufacturer: EMUCA

Application:

Mounting plate, for furniture feet, furniture castors, machine feet, cabinet legs, sofa feet and much more.

The AD-555-28 mounting plate is used to fasten furniture feet, leveling feet, etc. under furniture, sofas, appliances, machinery, etc.

Also suitable for replacing defective furniture feet, furniture castors or sofa feet.

The galvanized surface of the top plate protects it from rust and corrosion.

The compact height of only 9 mm allows installation even with low ground clearance.

For indoor and weather-protected outdoor use thanks to corrosion-resistant zinc chromate coating.

The compact round plate enables a space-saving and resilient thread holder for furniture feet and furniture castors with W3/8 threaded pins.

The high-quality 200-140-075 bolt-on plates are perfect for:

• Feet
• Leveling feet
• Cabinet castors
• Articulated feet
• Legs
• Adjustable feet
• Containers
• Furniture feet
• Furniture castors
• Machine feet
• Cabinet legs
• Sofa legs

Technical details:

• Weight: 15 g
• Size: 28 mm (1-7/64″)
• Compatible with all furniture feet and castors with Whitworth thread W 3/8
• round
• Compact design for confined installation situations
• with three mounting holes
• stable
• Suitable for feet and castors with W3/8 threaded pins
• Zinc chromate
• Zinc alloy
• ZDC
• high brand quality of Sugatsune / LAMP®

Surface:

• Zinc chromate

Assembly:

• The top plate has three mounting holes with the diameter (⌀d2) ⌀3.2 mm (1/8″) and is attached to the lower surface of the piece of furniture with three screws (not included)
• The furniture feet or furniture castors, which are equipped with a screw, are then screwed into the thread of the AD-555-28 mounting plate and tightened

Dimensions:

• Plate Diameter (⌀D): ⌀28 mm (1-7/64″)
• Height (H): 9 mm (23/64″)
• Thread (d1): W3/8
• Mounting hole diameter (⌀d2): ⌀3.2 mm (1/8″)
• Distance between center point and mounting hole (⌀P): ⌀20 mm (25/32″)
• Material thickness (t): 2.7 mm (7/64″)

For more dimensions and details, see technical drawing.

Material:

• The AD-555-28 add-on plates are made of solid zinc alloy (ZDC)

Included in delivery:

• 4 pieces of fitting plate AD-555-28 made of solid zinc alloy, zinc chromate
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 200-140-075
• Item number: AD-555-28
• EAN Number: 4510932034692

Manufacturer: Sugatsune / LAMP® (Japan)

Usage:

Wooden dowels 9091978 for wooden panels, wood jointing, furniture making, shelving.

The high-quality long wood dowels 9091978 have a corrugated surface structure and, in combination with glue, connect wooden workpieces safely and reliably.

The long wood dowels are slightly pointed at both ends, making them easier to insert into the pre-drilled holes.

The concealed dowel connection keeps the visible surfaces of the connected wooden components free of screw heads and other visible fastening elements.

The glue can be optimally distributed on the surface.

The wooden dowel 9091978 is perfect for, among other things:

• Wooden panels
• Wood connection
• Furniture construction
• Shelving

Technical details:

• Peso: 0.97 g
• Size: 30 mm (1-3/16″)
• Reliable
• Stable
• Enables concealed timber joints without visible fasteners
• Robust
• Suitable for holes with a depth of ⌀ 8 mm and 15 mm per wooden workpiece
• Corrugated
• High brand quality from UMAXO®

Surface:

• Corrugated

Assembly:

• For assembly, two holes with a diameter of ⌀8 mm (5/16″) must be pre-drilled on the two surfaces to be joined
• The depth of the holes must be 15 mm (19/32″), which is half the length of the anchor. In this way, the surfaces can be optimally connected by pressing them together
• A suitable glue should be used for the wood connection, which should be added before pressing together

Dimensions:

• Length of the long wood anchor: 30 mm (1-3/16″)
• Diameter: Φ8 mm (5/16″)

For more dimensions and details, see technical drawing.

Manufacture:

• The high-quality long wood dowels 9091978 are made of beech wood (wood)

Included in delivery:

• 10 pieces long wood dowels 9091978 made of dried beech wood, corrugated

Manufacturer’s part numbers:

• Item Identification Number: 9091978
• EAN number: 4510932010702

Manufacturer: EMUCA

Usage:

Wooden dowels 9095678 for wooden panels, wood jointing, furniture making, shelving.

The high-quality long wood dowels 9095678 have a ribbed surface structure and, in combination with glue, connect wooden workpieces safely and reliably.

The long wood dowels are slightly sharpened at the ends so that they find an optimal hold in the dowel hole.

Due to the ribbed surface, the long wood dowel is particularly suitable for stable, glued wood connections in furniture, panel and shelving constructions.

The glue can be optimally distributed on the surface.

The wooden dowel 9095678 is perfect for, among other things:

• Wooden panels
• Wood connection
• Furniture construction
• Shelving

Technical details:

• Weight: 0.51 g per piece
• Length: 30 mm (1-3/16″)
• With FSC certificate
• Reliable
• Stable
• Tapered ends for easier insertion into the dowel hole
• Robust
• Suitable for stable glue joints in wooden workpieces
• Corrugated
• High brand quality from UMAXO®

Surface:

• Corrugated

Assembly:

• For assembly, two holes of ⌀6 mm (15/64″) are pre-drilled into the two wooden surfaces to be connected
• The depth of the holes must be 15 mm (19/32″), which is half the length of the anchor. In this way, the surfaces can be optimally connected by pressing them together
• A suitable glue should be used for the wood connection, which should be added before pressing together

Dimensions:

• Length of the long wood anchor: 30 mm (1-3/16″)
• Diameter: ⌀6 mm (15/64″)

For more dimensions and details, see technical drawing.

Manufacture:

• The high-quality long wood dowels 9095678 are made of beech wood (wood)

Included in delivery:

• 10 pieces of long wood dowels 9095678 made of dried beech wood, corrugated

Manufacturer’s part numbers:

• Item Identification Number: 9095678
• EAN number: 4510932010702

Manufacturer: EMUCA

Usage:

Rectangular connecting plate, with four sharp teeth 8200505 for wooden panels, furniture, cabinets, wooden shelves.

Rectangular dowels, press-fit dowels with teeth on one side.

The high-quality wooden connectors 8200505 have a rectangular shape and four sharp teeth (nails) at the corners and a mounting hole in the middle for secure fastening.

The sharp claws of the rectangular mounting bracket ensure that the wooden panels do not move when the screw is tightened.

The connecting plate 8200505 is perfect for, among other things:

• Wooden panels
• Furniture
• Cupboards
• Wooden shelves

Technical details:

• Weight: 2.5 g
• Length: 18 mm (55/64″)
• Stable
• Suitable for concealed panel joints on wooden panels and shelves
• Robust
• Galvanized
• High brand quality from UMAXO®

Surface:

• Galvanized

Assembly:

• To screw on

Dimensions:

• Wood connector length: 22 mm (55/64″)
• Width: 18 mm (45/64″)
• Mounting hole diameter: ⌀4 mm (5/32″)
• Length of teeth: 4 mm (5/32″)

For more dimensions and details, see technical drawing.

Manufacture:

• The high-quality wooden connectors 8200505 are made of steel

Included in delivery:

• 10 pieces of wooden connectors 8200505 made of sturdy steel, galvanized

Manufacturer’s part numbers:

• Product identification number: 8200505
• EAN number: 8432393121499

Manufacturer: EMUCA

Application:

Siphon protection for vanity cabinet, kitchen cabinet, bathroom cabinet, siphon, drain and much more.

The curved plastic siphon cut-out 3044421 transforms drawers under washbasins or sinks into fully usable storage space.

The round shape of the siphon diaphragm 3044421 encloses the siphon so that no valuable depth is lost.

Robust, easy-to-clean material protects the furniture from moisture and chemicals.

The precisely fitting shape of the siphon cover 3044421 fits flush into drawers and maintains a tidy look.

Thanks to screw mounting, the siphon cut-out can 3044421 be quickly retrofitted and just as easy to replace if necessary.

The high-quality siphon covers 3044421 fit perfectly with, among other things:

• Drawer
• Cabinet
• Storage space
• Furniture
• Interior pull-out
• Vanity unit
• Kitchen cabinet
• Bathroom cabinet
• Siphon
• Expiration

Technical details:

• Weight: 129 g
• Size: 124 mm (4-7/8″)
• Available in three surface colours: white, grey and anthracite grey
• Easy installation, practical, stable
• Made of impact-resistant plastic
• Curved shape flows around standard siphons
• Optimizes drawer depth under the basin
• Light weight, no additional load on the pull-out
• Easy cleaning with mild cleaners
• Assembly in a few minutes without special tools
• grey
• robust
• high brand quality from UMAXO®

Surface:

• Grey
• Grey offers a versatile and elegant base that combines well with other colours and materials, creating a calm, timeless atmosphere in both modern and classic spaces
• In addition, grey has the ability to highlight accents in a room without being dominant itself, making it ideal for creating harmonious and balanced interiors

Assembly:

• Fastening is done with countersunk chipboard screws 3.5 x 16 mm (not included)
• To attach the siphon panel 3044421, a cut-out with a depth of 196 mm (7-23/32″) and a width of 124 mm (4-7/8″) must be made in the bottom of the drawer
• At the end of the cut-out, a hole with a diameter of ⌀62 mm (2-7/16″) must be made
• The center of the hole should be on the inner edge of the cutout
• The siphon protector 3044421 is screwed to the back of the drawer from the inside
• The siphon cutout 3044421 has four mounting holes with a diameter of 4 mm (5/32″) (for more details, see assembly drawing)

Dimensions:

• Siphon diaphragm depth 3044421: 124 mm (4-7/8″)
• Width: 124 mm (4-7/8″)
• Height of the frame: 81 mm (3-3/16″)
• Inner height of the frame: 65 mm (2-9/16″)

For more dimensions and details, see technical drawing.

Material:

• The siphon covers 3044421 are made of robust plastic (plastic)
• Plastic is lightweight and allows for easy assembly of components and furniture fittings without compromising stability
• It is corrosion-resistant, making it particularly suitable for humid environments such as swimming pools, bathrooms or kitchens
• In addition, the flexible formability of plastic enables a wide variety of designs and unobtrusive integration into different furniture styles or devices and machines

Included in delivery:

• 1 piece siphon cut-out 3044421 made of robust plastic, grey

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 3044421 (alternatively: 3044321)
• EAN number: 8432393259390

Manufacturer: EMUCA

Application:

Rectangular siphon protector for vanity unit, kitchen cabinet, bathroom cabinet, siphon, drain and much more.

The slim, rectangular plastic siphon cut-out 3011923 transforms drawers under washbasins or sinks into fully usable storage space.

The shape of the siphon diaphragm 3011923 encloses the siphon so that no valuable depth is lost.

The siphon cut-out 3011923 is suitable for drawers with a minimum depth of 250 mm (9-27/32″).

Robust, easy-to-clean material protects the furniture from moisture and chemicals.

The precisely fitting shape of the siphon panel 3011923 fits flush into drawers and maintains a tidy look.

Thanks to screw mounting, the siphon cut-out can 3011923 be quickly retrofitted and just as easy to replace if necessary.

The high-quality siphon covers 3011923 fit perfectly with, among other things:

• Drawer
• Cabinet
• Storage space
• Furniture
• Interior pull-out
• Vanity unit
• Kitchen cabinet
• Bathroom cabinet
• Siphon
• Expiration

Technical details:

• Weight: 111 g
• Size: 246 mm (9-11/16″)
• Available in grey, anthracite grey and white
• Easy installation, practical, stable
• Minimum Drawer Depth: 250 mm (9-27/32″)
• Made of impact-resistant plastic
• Flows around standard siphons
• Optimizes drawer depth under the basin
• Light weight, no additional load on the pull-out
• Easy cleaning with mild cleaners
• Assembly in a few minutes without special tools
• anthracite grey
• robust
• high brand quality from UMAXO®

Surface:

• Anthracite grey
• Anthracite grey fittings and components look modern and discreet at the same time, which means that they can be harmoniously integrated into different living styles
• The hard-wearing surface conceals fingerprints and minor signs of use

Assembly:

• Fastening is done with countersunk chipboard screws 3.5 x 16 mm (not included)
• To attach the siphon panel 3011923, a cut-out with a depth of 220 mm (8-21/32″) and a width of 150 mm (5-29/32″) must be made in the bottom of the drawer
• The siphon protector 3011923 is screwed to the back of the drawer from the inside (for more details, see assembly drawing)

Dimensions:

• Siphon diaphragm depth 3011923: 246 mm (9-11/16″)
• Width: 186 mm (7-21/64″)
• Height of the side: 56 mm (2-13/64″)
• Inner height of the frame: 40 mm (1-37/64″)

For more dimensions and details, see technical drawing.

Material:

• The siphon covers 3011923 are made of robust plastic (plastic)
• Plastic is lightweight and allows for easy assembly of components and furniture fittings without compromising stability
• It is corrosion-resistant, making it particularly suitable for humid environments such as swimming pools, bathrooms or kitchens
• In addition, the flexible formability of plastic enables a wide variety of designs and unobtrusive integration into different furniture styles or devices and machines

Included in delivery:

• 1 piece siphon cut-out 3011923 made of robust plastic, anthracite grey

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 3011923
• EAN number: 8432393300757

Manufacturer: EMUCA

Application:

Rectangular siphon protector for vanity unit, kitchen cabinet, bathroom cabinet, siphon, drain and much more.

The slim, rectangular plastic siphon cut-out 3011921 transforms drawers under washbasins or sinks into fully usable storage space.

The shape of the siphon diaphragm 3011921 encloses the siphon so that no valuable depth is lost.

The siphon cut-out 3011921 is suitable for drawers with a minimum depth of 250 mm (9-27/32″).

Robust, easy-to-clean material protects the furniture from moisture and chemicals.

The precisely fitting shape of the siphon panel 3011921 fits flush into drawers and maintains a tidy look.

Thanks to screw mounting, the siphon cut-out can 3011921 be quickly retrofitted and just as easy to replace if necessary.

The high-quality siphon covers 3011921 fit perfectly with, among other things:

• Drawer
• Cabinet
• Storage space
• Furniture
• Interior pull-out
• Vanity unit
• Kitchen cabinet
• Bathroom cabinet
• Siphon
• Expiration

Technical details:

• Weight: 111 g
• Size: 246 mm (9-11/16″)
• Available in grey, anthracite grey and white
• Easy installation, practical, stable
• Minimum Drawer Depth: 250 mm (9-27/32″)
• Made of impact-resistant plastic
• Flows around standard siphons
• Optimizes drawer depth under the basin
• Light weight, no additional load on the pull-out
• Easy cleaning with mild cleaners
• Assembly in a few minutes without special tools
• grey
• robust
• high brand quality from UMAXO®

Surface:

• Grey
• Grey offers a versatile and elegant base that combines well with other colours and materials, creating a calm, timeless atmosphere in both modern and classic spaces
• In addition, grey has the ability to highlight accents in a room without being dominant itself, making it ideal for creating harmonious and balanced interiors

Assembly:

• Fastening is done with countersunk chipboard screws 3.5 x 16 mm (not included)
• To attach the siphon panel 3011921, a cut-out with a depth of 220 mm (8-21/32″) and a width of 150 mm (5-29/32″) must be made in the bottom of the drawer
• The siphon protector 3011921 is screwed to the back of the drawer from the inside (for more details, see assembly drawing)

Dimensions:

• Siphon diaphragm depth 3011921: 246 mm (9-11/16″)
• Width: 186 mm (7-21/64″)
• Height of the side: 56 mm (2-13/64″)
• Inner height of the frame: 40 mm (1-37/64″)

For more dimensions and details, see technical drawing.

Material:

• The siphon covers 3011921 are made of robust plastic (plastic)
• Plastic is lightweight and allows for easy assembly of components and furniture fittings without compromising stability
• It is corrosion-resistant, making it particularly suitable for humid environments such as swimming pools, bathrooms or kitchens
• In addition, the flexible formability of plastic enables a wide variety of designs and unobtrusive integration into different furniture styles or devices and machines

Included in delivery:

• 1 piece siphon cut-out 3011921 made of robust plastic, grey

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 3011921
• EAN number: 8432393300740

Manufacturer: EMUCA

Application:

Rectangular siphon protector for vanity unit, kitchen cabinet, bathroom cabinet, siphon, drain and much more.

The slim, rectangular siphon cut-out 3011915 made of plastic transforms drawers under washbasins or sinks into fully usable storage space.

The shape of the siphon diaphragm 3011915 encloses the siphon so that no valuable depth is lost.

The siphon cut-out 3011915 is suitable for drawers with a minimum depth of 250 mm (9-27/32″).

Robust, easy-to-clean material protects the furniture from moisture and chemicals.

The precisely fitting shape of the siphon panel 3011915 fits flush into drawers and maintains a tidy look.

Thanks to screw mounting, the siphon cut-out can 3011915 be quickly retrofitted and just as easy to replace if necessary.

The high-quality siphon covers 3011915 are perfect for, among other things:

• Drawer
• Cabinet
• Storage space
• Furniture
• Interior pull-out
• Vanity unit
• Kitchen cabinet
• Bathroom cabinet
• Siphon
• Expiration

Technical details:

• Weight: 111 g
• Size: 246 mm (9-11/16″)
• Available in grey, anthracite grey and white
• Easy installation, practical, stable
• Minimum Drawer Depth: 250 mm (9-27/32″)
• Made of impact-resistant plastic
• Flows around standard siphons
• Optimizes drawer depth under the basin
• Light weight, no additional load on the pull-out
• Easy cleaning with mild cleaners
• Assembly in a few minutes without special tools
• white
• robust
• high brand quality from UMAXO®

Surface:

• White
• White finishes convey a clean and modern aesthetic
• The colour white reflects light effectively, making rooms look brighter and visually larger
• In addition, white objects are inconspicuous and easy to clean, which makes them particularly practical for everyday use

Assembly:

• Fastening is done with countersunk chipboard screws 3.5 x 16 mm (not included)
• To attach the siphon panel 3011915, a cut-out with a depth of 220 mm (8-21/32″) and a width of 150 mm (5-29/32″) must be made in the bottom of the drawer
• The siphon protector 3011915 is screwed to the back of the drawer from the inside (for more details, see assembly drawing)

Dimensions:

• Siphon diaphragm depth 3011915: 246 mm (9-11/16″)
• Width: 186 mm (7-21/64″)
• Height of the side: 56 mm (2-13/64″)
• Inner height of the frame: 40 mm (1-37/64″)

For more dimensions and details, see technical drawing.

Material:

• The siphon covers 3011915 are made of robust plastic (plastic)
• Plastic is lightweight and allows for easy assembly of components and furniture fittings without compromising stability
• It is corrosion-resistant, making it particularly suitable for humid environments such as swimming pools, bathrooms or kitchens
• In addition, the flexible formability of plastic enables a wide variety of designs and unobtrusive integration into different furniture styles or devices and machines

Included in delivery:

• 1 piece siphon cut-out 3011915 made of robust plastic, white

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 3011915
• EAN number: 8432393300603

Manufacturer: EMUCA

Application:

Siphon protection for vanity cabinet, kitchen cabinet, bathroom cabinet, siphon, drain and much more.

The curved plastic siphon cut-out 3044423 transforms drawers under washbasins or sinks into fully usable storage space.

The round shape of the siphon diaphragm 3044423 encloses the siphon so that no valuable depth is lost.

Robust, easy-to-clean material protects the furniture from moisture and chemicals.

The precisely fitting shape of the siphon panel 3044423 fits flush into drawers and maintains a tidy look.

Thanks to screw mounting, the siphon cut-out can 3044423 be quickly retrofitted and just as easy to replace if necessary.

The high-quality siphon covers 3044423 are perfect for, among other things:

• Drawer
• Cabinet
• Storage space
• Furniture
• Interior pull-out
• Vanity unit
• Kitchen cabinet
• Bathroom cabinet
• Siphon
• Expiration

Technical details:

• Weight: 129 g
• Size: 124 mm (4-7/8″)
• Easy installation, practical, stable
• Made of impact-resistant plastic
• Curved shape flows around standard siphons
• Optimizes drawer depth under the basin
• Light weight, no additional load on the pull-out
• Easy cleaning with mild cleaners
• Assembly in a few minutes without special tools
• anthracite grey
• robust
• high brand quality from UMAXO®

Surface:

• Anthracite grey
• Anthracite grey objects look modern and discreet at the same time, which means that they can be harmoniously integrated into different living styles
• The hard-wearing surface conceals fingerprints and minor signs of use

Assembly:

• Fastening is done with countersunk chipboard screws 3.5 x 16 mm (not included)
• To attach the siphon panel 3044423, a cut-out with a depth of 196 mm (7-23/32 “) and a width of 124 mm (4-7/8”) must be made in the bottom of the drawer
• At the end of the cut-out, a hole with a diameter of ⌀62 mm (2-7/16″) must be made
• The center of the hole should be on the inner edge of the cutout
• The siphon protector 3044423 is screwed to the back of the drawer from the inside
• The siphon cutout 3044423 has four mounting holes with a diameter of 4 mm (5/32″) (for more details, see assembly drawing)

Dimensions:

• Siphon diaphragm depth 3044423: 124 mm (4-7/8″)
• Width: 124 mm (4-7/8″)
• Height of the frame: 81 mm (3-3/16″)
• Inner height of the frame: 65 mm (2-9/16″)

For more dimensions and details, see technical drawing.

Material:

• The siphon covers 3044423 are made of robust plastic
• Plastic is lightweight and allows for easy assembly of components and furniture fittings without compromising stability
• It is corrosion-resistant, making it particularly suitable for humid environments such as swimming pools, bathrooms or kitchens
• In addition, the flexible formability of plastic enables a wide variety of designs and unobtrusive integration into different furniture styles or devices and machines

Included in delivery:

• 1 piece siphon cut-out 3044423 made of robust plastic, anthracite grey

Manufacturer’s part numbers:

• Article ID: 3044423
• EAN number: 8432393259406

Manufacturer: EMUCA