Application:

Robust rope flap holder for furniture flaps, cabinet flaps, secretary flaps, bar flaps and much more.

The flap fitting 1010621 (Microwinch) is a compact flap holder for downward-opening furniture flaps and works with a heavy-duty steel cable.

When opened, the mechanism slows down the downward movement of the flap and thus prevents it from falling uncontrollably.

The end position of the open flap can be adjusted so that the opening path can be adapted to the furniture and use.

The 14 kg (31 lbs) braking force version is intended for flap heights from 210 to 480 mm (8-17/64″ – 18-57/64″); the allowable combination of flap height, flap weight and number of mechanisms is determined according to the selection table.

Since the rope flap holder can 1010621 be mounted either horizontally or vertically as well as on the right or left, it can also be used flexibly in flatter furniture frames.

The combination of steel and plastic ensures a compact, robust construction and makes the fitting particularly suitable for home, office and cabinet furniture.

The high-quality rope flap holders 1010621 are perfect for, among other things:

• Living room furniture
• Office furniture
• Wall cabinets
• Sideboards
• Furniture flaps
• Cabinet flaps
• Secretary flaps
• Bar flaps

Technical details:

• Weight: 295 g
• Load capacity (load capacity): 14 kg (31 lbs)
• Size: 160.5 mm (6-5/16″)
• Available in 4 versions: 4 kg, 6 kg, 10 kg, 14 kg
• Easy installation, stable
• Damped downward movement of the furniture flap
• Adjustable opening end position
• With steel cable
• Can be used on the right and left
• Can be mounted horizontally and vertically
• For flap heights from 210 to 480 mm (8-17/64″ – 18-57/64″)
• For panel thicknesses from 16 to 22 mm (5/8″ – 55/64″)
• Compact design
• Suitable for flat furniture carcasses
• Use with furniture hinges
• One or two mechanisms depending on the weight of the flap and the height of the flap
• Grey
• robust
• High brand quality from UMAXO®

Surface:

• Grey
• Grey offers a versatile and elegant base that combines well with other colours and materials, creating a calm, timeless atmosphere in both modern and classic spaces
• In addition, grey has the ability to highlight accents in a room without being dominant itself, making it ideal for creating harmonious and balanced interiors

Assembly:

• Fastening is done using the six screws included in the scope of delivery (Euro screws)
• The rope flap holder 1010621 has 2 mounting holes with ⌀6.5 mm at a distance of 110 mm; the separate flap connection also has two attachment points
• First of all, the number of mechanisms matching the flap height and the flap weight must be determined on the basis of the selection table
• Then the attachment points on the carcase side are marked according to the desired horizontal or vertical installation position and pre-drilled for the mechanism with ⌀5 mm x 12 mm
• In the case of a wood-based or wood-based key, two holes of ⌀5 mm (13/64″) x 13 mm and the middle hole of ⌀10 mm x 11 mm are made for the flap connection
• The flap holder and the flap connection are then mounted with the provided fastening screws
• Then the steel cable is connected to the flap connection and checked for correct running. Finally, the end opening position is adjusted, whereby the flap is to be relieved during adjustment (for further details, see assembly drawing)

Dimensions:

• Length: 160.5 mm (6-5/16″)
• Maximum height: 68.5 mm (2-45/64″)
• Case height at the narrower end: 62.7 mm (2-15/32″)
• Depth: 26 mm (1-1/32″)
• Mounting hole spacing: 110 mm (4-21/64″)
• Mounting holes on mechanism: ⌀6.5 mm (1/4″)

For more dimensions and details , see technical drawing.

Material:

• The 1010621 Rope Flap Holders are made of metal and robust plastic (metal and plastic)
• Steel rope
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 set 1010621 cable flap holder made of metal and robust plastic, grey
• 6 pieces of Euro screws

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Item ID: 1010621
• GTIN number (EAN, UPC): 8432393100678

Manufacturer: EMUCA

Application:

Robust rope flap holder for furniture flaps, cabinet flaps, secretary flaps, bar flaps and much more.

The flap fitting 1010521 (Microwinch) is a compact flap holder for downward-opening furniture flaps and works with a heavy-duty steel cable.

When opened, the mechanism slows down the downward movement of the flap and thus prevents it from falling uncontrollably.

The end position of the open flap can be adjusted so that the opening path can be adapted to the furniture and use.

The 10 kg (22 lbs) braking force version is intended for flap heights from 210 to 480 mm (8-17/64″ – 18-57/64″); the allowable combination of flap height, flap weight and number of mechanisms is determined according to the selection table.

Since the cable flap holder can 1010521 be mounted either horizontally or vertically as well as on the right or left, it can also be used flexibly in flatter furniture frames.

The combination of steel and plastic ensures a compact, robust construction and makes the fitting particularly suitable for home, office and cabinet furniture.

The high-quality rope flap holders 1010521 are perfect for, among other things:

• Living room furniture
• Office furniture
• Wall cabinets
• Sideboards
• Furniture flaps
• Cabinet flaps
• Secretary flaps
• Bar flaps

Technical details:

• Weight: 295 g
• Load capacity: 10 kg (22 lbs)
• Size: 160.5 mm (6-5/16″)
• Available in 4 versions: 4 kg, 6 kg, 10 kg, 14 kg
• Easy installation, stable
• Damped downward movement of the furniture flap
• Adjustable opening end position
• With steel cable
• Can be used on the right and left
• Can be mounted horizontally and vertically
• For flap heights from 210 to 480 mm (8-17/64″ – 18-57/64″)
• For panel thicknesses from 16 to 22 mm (5/8″ – 55/64″)
• Compact design
• Suitable for flat furniture carcasses
• Use with furniture hinges
• One or two mechanisms depending on the weight of the flap and the height of the flap
• Grey
• robust
• High brand quality from UMAXO®

Surface:

• Grey
• Grey offers a versatile and elegant base that combines well with other colours and materials, creating a calm, timeless atmosphere in both modern and classic spaces
• In addition, grey has the ability to highlight accents in a room without being dominant itself, making it ideal for creating harmonious and balanced interiors

Assembly:

• Fastening is done using the six screws included in the scope of delivery (Euro screws)
• The rope flap holder 1010521 has 2 mounting holes with ⌀6.5 mm at a distance of 110 mm; the separate flap connection also has two attachment points
• First of all, the number of mechanisms matching the flap height and the flap weight must be determined on the basis of the selection table
• Then the attachment points on the carcase side are marked according to the desired horizontal or vertical installation position and pre-drilled for the mechanism with ⌀5 mm x 12 mm
• In the case of a wood-based or wood-based key, two holes of ⌀5 mm (13/64″) x 13 mm and the middle hole of ⌀10 mm x 11 mm are made for the flap connection
• The flap holder and the flap connection are then mounted with the provided fastening screws
• Then the steel cable is connected to the flap connection and checked for correct running. Finally, the end opening position is adjusted, whereby the flap is to be relieved during adjustment (for further details, see assembly drawing)

Dimensions:

• Length: 160.5 mm (6-5/16″)
• Maximum height: 68.5 mm (2-45/64″)
• Case height at the narrower end: 62.7 mm (2-15/32″)
• Depth: 26 mm (1-1/32″)
• Mounting hole spacing: 110 mm (4-21/64″)
• Mounting holes on mechanism: ⌀6.5 mm (1/4″)

For more dimensions and details , see technical drawing.

Material:

• The 1010521 Rope Flap Holders are made of metal and robust plastic (metal and plastic)
• Steel rope
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 set 1010521 cable flap holder made of metal and robust plastic, grey
• 6 pieces of Euro screws

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Item ID: 1010521
• GTIN number (EAN, UPC): 8432393100661

Manufacturer: EMUCA

Application:

Robust rope flap holder for furniture flaps, cabinet flaps, secretary flaps, bar flaps and much more.

The flap fitting 1010421 (Microwinch) is a compact flap holder for downward-opening furniture flaps and works with a heavy-duty steel cable.

When opened, the mechanism slows down the downward movement of the flap and thus prevents it from falling uncontrollably.

The end position of the open flap can be adjusted so that the opening path can be adapted to the furniture and use.

The 6 kg (13 lbs) braking force version is intended for flap heights from 210 to 480 mm (8-17/64″ – 18-57/64″); the allowable combination of flap height, flap weight and number of mechanisms is determined according to the selection table.

Since the rope flap holder can 1010421 be mounted either horizontally or vertically as well as on the right or left, it can also be used flexibly in flatter furniture frames.

The combination of steel and plastic ensures a compact, robust construction and makes the fitting particularly suitable for home, office and cabinet furniture.

The high-quality rope flap holders 1010421 are perfect for, among other things:

• Living room furniture
• Office furniture
• Wall cabinets
• Sideboards
• Furniture flaps
• Cabinet flaps
• Secretary flaps
• Bar flaps

Technical details:

• Weight: 300 g
• Load capacity (load capacity): 6 kg (13 lbs)
• Size: 160.5 mm (6-5/16″)
• Available in 4 versions: 4 kg, 6 kg, 10 kg, 14 kg
• Easy installation, stable
• Damped downward movement of the furniture flap
• Adjustable opening end position
• With steel cable
• Can be used on the right and left
• Can be mounted horizontally and vertically
• For flap heights from 210 to 480 mm (8-17/64″ – 18-57/64″)
• For panel thicknesses from 16 to 22 mm (5/8″ – 55/64″)
• Compact design
• Suitable for flat furniture carcasses
• Use with furniture hinges
• One or two mechanisms depending on the weight of the flap and the height of the flap
• Grey
• robust
• High brand quality from UMAXO®

Surface:

• Grey
• Grey offers a versatile and elegant base that combines well with other colours and materials, creating a calm, timeless atmosphere in both modern and classic spaces
• In addition, grey has the ability to highlight accents in a room without being dominant itself, making it ideal for creating harmonious and balanced interiors

Assembly:

• Fastening is done using the six screws included in the scope of delivery (Euro screws)
• The rope flap holder 1010421 has 2 mounting holes with ⌀6.5 mm at a distance of 110 mm; the separate flap connection also has two attachment points
• First of all, the number of mechanisms matching the flap height and the flap weight must be determined on the basis of the selection table
• Then the attachment points on the carcase side are marked according to the desired horizontal or vertical installation position and pre-drilled for the mechanism with ⌀5 mm x 12 mm
• In the case of a wood-based or wood-based key, two holes of ⌀5 mm (13/64″) x 13 mm and the middle hole of ⌀10 mm x 11 mm are made for the flap connection
• The flap holder and the flap connection are then mounted with the provided fastening screws
• Then the steel cable is connected to the flap connection and checked for correct running. Finally, the end opening position is adjusted, whereby the flap is to be relieved during adjustment (for further details, see assembly drawing)

Dimensions:

• Length: 160.5 mm (6-5/16″)
• Maximum height: 68.5 mm (2-45/64″)
• Case height at the narrower end: 62.7 mm (2-15/32″)
• Depth: 26 mm (1-1/32″)
• Mounting hole spacing: 110 mm (4-21/64″)
• Mounting holes on mechanism: ⌀6.5 mm (1/4″)

For more dimensions and details , see technical drawing.

Material:

• The 1010421 rope flap holders are made of metal and robust plastic (metal and plastic)
• Steel rope
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 set of rope flap holders 1010421 made of metal and robust plastic, grey
• 6 pieces of Euro screws

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 1010421
• GTIN number (EAN, UPC): 8432393100654

Manufacturer: EMUCA

Application:

Robust rope flap holder for furniture flaps, cabinet flaps, secretary flaps, bar flaps and much more.

The flap fitting 1010321 (Microwinch) is a compact flap holder for downward-opening furniture flaps and works with a heavy-duty steel cable.

When opened, the mechanism slows down the downward movement of the flap and thus prevents it from falling uncontrollably.

The end position of the open flap can be adjusted so that the opening path can be adapted to the furniture and use.

The 4 kg (9 lbs) braking force version is intended for flap heights from 210 to 480 mm (8-17/64″ – 18-57/64″); the allowable combination of flap height, flap weight and number of mechanisms is determined according to the selection table.

Since the rope flap holder can 1010321 be mounted either horizontally or vertically as well as on the right or left, it can also be used flexibly in flatter furniture frames.

The combination of steel and plastic ensures a compact, robust construction and makes the fitting particularly suitable for home, office and cabinet furniture.

The high-quality rope flap holders 1010321 are perfect for, among other things:

• Living room furniture
• Office furniture
• Wall cabinets
• Sideboards
• Furniture flaps
• Cabinet flaps
• Secretary flaps
• Bar flaps

Technical details:

• Weight: 300 g
• Load capacity (load capacity): 4 kg (9 lbs)
• Size: 160.5 mm (6-5/16″)
• Available in 4 versions: 4 kg, 6 kg, 10 kg, 14 kg
• Easy installation, stable
• Damped downward movement of the furniture flap
• Adjustable opening end position
• With steel cable
• Can be used on the right and left
• Can be mounted horizontally and vertically
• For flap heights from 210 to 480 mm (8-17/64″ – 18-57/64″)
• For panel thicknesses from 16 to 22 mm (5/8″ – 55/64″)
• Compact design
• Suitable for flat furniture carcasses
• Use with furniture hinges
• One or two mechanisms depending on the weight of the flap and the height of the flap
• Grey
• robust
• High brand quality from UMAXO®

Surface:

• Grey
• Grey offers a versatile and elegant base that combines well with other colours and materials, creating a calm, timeless atmosphere in both modern and classic spaces
• In addition, grey has the ability to highlight accents in a room without being dominant itself, making it ideal for creating harmonious and balanced interiors

Assembly:

• Fastening is done using the six screws included in the scope of delivery (Euro screws)
• The rope flap holder 1010321 has 2 mounting holes with ⌀6.5 mm at a distance of 110 mm; the separate flap connection also has two attachment points
• First of all, the number of mechanisms matching the flap height and the flap weight must be determined on the basis of the selection table
• Then the attachment points on the carcase side are marked according to the desired horizontal or vertical installation position and pre-drilled for the mechanism with ⌀5 mm x 12 mm
• In the case of a wood-based or wood-based key, two holes of ⌀5 mm (13/64″) x 13 mm and the middle hole of ⌀10 mm x 11 mm are made for the flap connection
• The flap holder and the flap connection are then mounted with the provided fastening screws
• Then the steel cable is connected to the flap connection and checked for correct running. Finally, the end opening position is adjusted, whereby the flap is to be relieved during adjustment (for further details, see assembly drawing)

Dimensions:

• Length: 160.5 mm (6-5/16″)
• Maximum height: 68.5 mm (2-45/64″)
• Case height at the narrower end: 62.7 mm (2-15/32″)
• Depth: 26 mm (1-1/32″)
• Mounting hole spacing: 110 mm (4-21/64″)
• Mounting holes on mechanism: ⌀6.5 mm (1/4″)

For more dimensions and details , see technical drawing.

Material:

• The 1010321 Rope Flap Holders are made of metal and robust plastic (metal and plastic)
• Steel rope
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 set of rope flap holders 1010321 made of metal and robust plastic, grey
• 6 pieces of Euro screws

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 1010321
• GTIN number (EAN, UPC): 8432393100647

Manufacturer: EMUCA

Application:

2 high-quality friction hinges for device lids, furniture flaps, monitor housings and much more.

The HG-TB30 torque hinge set consists of a left (HG-TB30L) and a right (HG-TB30R) hinge for a symmetrical, horizontally mounted flap guide.

Each hinge generates a constant torque of 3 N·m, thus enabling the flap to be continuously positioned within the appropriate load range.

Together, both hinges provide a nominal total torque of 6 N·m and distribute the load evenly on both sides.

The free-stop function holds the lid, displays or device flaps in the desired position without additional detent.

The mirror-image left-right design ensures clean installation and stable, controlled movement in both directions of rotation.

The robust SUS430 stainless steel structure is particularly suitable for appliances, furniture and technical installations.

The high-quality HG-TB30 friction hinges are perfect for, among other things:

• LCD mounts
• Surveillance cameras
• Control panels
• Machine covers
• Display units
• Consoles
• technical housings
• Device lid
• Furniture flaps
• Monitor Enclosures

Technical details:

• Torque: 6 N·m
• Weight: 64 g
• Size: 52.5 mm (2-1/16″)
• Available in four different torque levels: 1.4 N·m (HG-TB7), 4 N·m (HG-TB20), 6 N·m (HG-TB30) and 9 N·m (HG-TB45)
• Easy installation, stable
• Set of one left and one right torque hinge
• HG-TB30L for the left side
• HG-TB30R for the right side
• Constant torque in both directions of movement
• Stepless free-stop function
• Opening angle up to 360°
• For horizontal mounting
• Main Material Stainless Steel SUS430
• Operating temperature from 0 °C to 40 °C
• Tested in-house with 20,000 opening and closing cycles
• Mirror-image left-right design
• Suitable for technical and industrial applications
• Material thickness: 2.5 mm (3/32″)
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from Sugatsune / LAMP®.

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• First, the fastening positions on the flap and on the body or device housing must be marked and pre-drilled using the technical dimensional drawing
• The HG-TB30L is mounted on the left side and the HG-TB30R on the right side
• Both hinge axes must be exactly at the same height, aligned horizontally and aligned with each other
• For the required alignment margin, the mounting holes must be made slightly excessive according to the manufacturer’s specifications with a tolerance of C0.5
• The vertical legs are securely fastened with M5 countersunk screws and the horizontal legs with M5 pan head or cylinder head screws
• The flap must then be operated over the entire range of motion and the safe positioning in different opening positions must be checked

Dimensions:

• The measurements apply to the left and right hinges; the two versions are mirror images
• Torque hinge height: 52.5 mm (2-1/16″)
• Depth: 42.5 mm (1-43/64″)
• Width: 19 mm (3/4″)

For more dimensions and details , see technical drawing.

Material:

• HG-TB30 friction hinges are made of high-quality SUS430 stainless steel (1.4016 or X6Cr17)
• SUS430 (1.4016) stainless steel provides solid corrosion resistance for dry to moderately humid interiors, making it well suited for furniture and industrial hardware without chloride exposure
• It is ferromagnetic and therefore ideal for magnetic latches, locking mechanisms and counterplates

Included in delivery:

• 1 set of torque hinges HG-TB30 (HG-TB30L and HG-TB30R) made of high-quality stainless steel SUS430, polished to a gloss finish
• This item does not include mounting screws

Watch the product video:

Manufacturer’s part numbers:

• Item ID: HG-TB30L and HG-TB30R (alternatively: 170-012-416 and 170-012-415)
• Item number: HG-TB30
• GTIN number (EAN, UPC): 4510932004114 and 4510932004107

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

2 high-quality friction hinges for device lids, furniture flaps, monitor housings and much more.

The HG-TB20 torque hinge set consists of a left (HG-TB20L) and a right (HG-TB20R) hinge for a symmetrical, horizontally mounted flap guide.

Each hinge generates a constant torque of 2 N·m, allowing the flap to be continuously positioned within the appropriate load range.

Together, both hinges provide a nominal total torque of 4 N·m and distribute the load evenly on both sides.

The free-stop function holds the lid, displays or device flaps in the desired position without additional detent.

The mirror-image left-right design ensures clean installation and stable, controlled movement in both directions of rotation.

The robust SUS430 stainless steel structure is particularly suitable for appliances, furniture and technical installations.

The high-quality HG-TB20 friction hinges are perfect for, among other things:

• LCD mounts
• Surveillance cameras
• Control panels
• Machine covers
• Display units
• Consoles
• technical housings
• Device lid
• Furniture flaps
• Monitor Enclosures

Technical details:

• Torque: 4 N·m
• Weight: 64 g
• Size: 52.5 mm (2-1/16″)
• Available in four different torque levels: 1.4 N·m (HG-TB7), 4 N·m (HG-TB20), 6 N·m (HG-TB30) and 9 N·m (HG-TB45)
• Easy installation, stable
• Set of one left and one right torque hinge
• HG-TB20L for the left side
• HG-TB20R for the right side
• Constant torque in both directions of movement
• Stepless free-stop function
• Opening angle up to 360°
• For horizontal mounting
• Main Material Stainless Steel SUS430
• Operating temperature from 0 °C to 40 °C
• Tested in-house with 20,000 opening and closing cycles
• Mirror-image left-right design
• Suitable for technical and industrial applications
• Material thickness: 2.5 mm (3/32″)
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from Sugatsune / LAMP®.

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• First, the fastening positions on the flap and on the body or device housing must be marked and pre-drilled using the technical dimensional drawing
• The HG-TB20L is mounted on the left side and the HG-TB20R on the right side
• Both hinge axes must be exactly at the same height, aligned horizontally and aligned with each other
• For the required alignment margin, the mounting holes must be made slightly excessive according to the manufacturer’s specifications with a tolerance of C0.5
• The vertical legs are securely fastened with M5 countersunk screws and the horizontal legs with M5 pan head or cylinder head screws
• The flap must then be operated over the entire range of motion and the safe positioning in different opening positions must be checked

Dimensions:

• The measurements apply to the left and right hinges; the two versions are mirror images
• Torque hinge height: 52.5 mm (2-1/16″)
• Depth: 42.5 mm (1-43/64″)
• Width: 19 mm (3/4″)

For more dimensions and details , see technical drawing.

Material:

• HG-TB20 friction hinges are made of high-quality SUS430 stainless steel (1.4016 or X6Cr17)
• SUS430 (1.4016) stainless steel provides solid corrosion resistance for dry to moderately humid interiors, making it well suited for furniture and industrial hardware without chloride exposure
• It is ferromagnetic and therefore ideal for magnetic latches, locking mechanisms and counterplates

Included in delivery:

• 1 set of torque hinges HG-TB20 (HG-TB20L and HG-TB20R) made of high-quality stainless steel SUS430, polished to a glossy finish
• This item does not include mounting screws

Watch the product video:

Manufacturer’s part numbers:

• Item ID: HG-TB20L and HG-TB20R (alternatively: 170-012-414 and 170-012-413)
• Item number: HG-TB20
• GTIN number (EAN, UPC): 4510932004091 and 4510932004084

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

2 high-quality friction hinges for device lids, furniture flaps, monitor housings and much more.

The HG-TB7 torque hinge set consists of a left (HG-TB7L) and a right (HG-TB7R) hinge for a symmetrical, horizontally mounted flap guide.

Each hinge generates a constant torque of 0.7 N·m, allowing the flap to be continuously positioned within the appropriate load range.

Together, both hinges provide a nominal total torque of 1.4 N·m and distribute the load evenly on both sides.

The free-stop function holds the lid, displays or device flaps in the desired position without additional detent.

The mirror-image left-right design ensures clean installation and stable, controlled movement in both directions of rotation.

The robust SUS430 stainless steel structure is particularly suitable for appliances, furniture and technical installations.

The high-quality HG-TB7 friction hinges are perfect for, among other things:

• LCD mounts
• Surveillance cameras
• Control panels
• Machine covers
• Display units
• Consoles
• technical housings
• Device lid
• Furniture flaps
• Monitor Enclosures

Technical details:

• Torque: 1.4 N·m
• Weight: 62 g
• Size: 52.5 mm (2-1/16″)
• Available in four different torque levels: 1.4 N·m (HG-TB7), 4 N·m (HG-TB20), 6 N·m (HG-TB30) and 9 N·m (HG-TB45)
• Easy installation, stable
• Set of one left and one right torque hinge
• HG-TB7L for the left side
• HG-TB7R for the right side
• Constant torque in both directions of movement
• Stepless free-stop function
• Opening angle up to 360°
• For horizontal mounting
• Main Material Stainless Steel SUS430
• Operating temperature from 0 °C to 40 °C
• Tested in-house with 20,000 opening and closing cycles
• Mirror-image left-right design
• Suitable for technical and industrial applications
• Material thickness: 2.5 mm (3/32″)
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from Sugatsune / LAMP®.

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• First, the fastening positions on the flap and on the body or device housing must be marked and pre-drilled using the technical dimensional drawing
• The HG-TB7L is mounted on the left side and the HG-TB7R on the right side
• Both hinge axes must be exactly at the same height, aligned horizontally and aligned with each other
• For the required alignment margin, the mounting holes must be made slightly excessive according to the manufacturer’s specifications with a tolerance of C0.5
• The vertical legs are securely fastened with M5 countersunk screws and the horizontal legs with M5 pan head or cylinder head screws
• The flap must then be operated over the entire range of motion and the safe positioning in different opening positions must be checked

Dimensions:

• The measurements apply to the left and right hinges; the two versions are mirror images
• Torque hinge height: 52.5 mm (2-1/16″)
• Depth: 42.5 mm (1-43/64″)
• Width: 19 mm (3/4″)

For more dimensions and details , see technical drawing.

Material:

• HG-TB7 friction hinges are made of high-quality SUS430 stainless steel (1.4016 or X6Cr17)
• SUS430 (1.4016) stainless steel provides solid corrosion resistance for dry to moderately humid interiors, making it well suited for furniture and industrial hardware without chloride exposure
• It is ferromagnetic and therefore ideal for magnetic latches, locking mechanisms and counterplates

Included in delivery:

• 1 set of torque hinges HG-TB7 (HG-TB7L and HG-TB7R) made of high-quality stainless steel SUS430, polished to a gloss finish
• This item does not include mounting screws

Watch the product video:

Manufacturer’s part numbers:

• Item ID: HG-TB7L and HG-TB7R (alternatively: 170-022-143 and 170-022-142)
• Item number: HG-TB7
• GTIN number (EAN, UPC): 4510932022965 and 4510932022958

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

2 high-quality friction hinges for device lids, furniture flaps, monitor housings and much more.

The HG-TB45 torque hinge set consists of a left (HG-TB45L) and a right (HG-TB45R) hinge for a symmetrical, horizontally mounted flap guide.

Each hinge generates a constant torque of 4.5 N·m, thus enabling the flap to be continuously positioned within the appropriate load range.

Together, both hinges provide a nominal total torque of 9 N·m and distribute the load evenly on both sides.

The free-stop function holds the lid, displays or device flaps in the desired position without additional detent.

The mirror-image left-right design ensures clean installation and stable, controlled movement in both directions of rotation.

The robust SUS430 stainless steel structure is particularly suitable for appliances, furniture and technical installations.

The high-quality HG-TB45 friction hinges are perfect for, among other things:

• LCD mounts
• Surveillance cameras
• Control panels
• Machine covers
• Display units
• Consoles
• technical housings
• Device lid
• Furniture flaps
• Monitor Enclosures

Technical details:

• Torque: 9 N·m
• Weight: 134 g
• Size: 61 mm (2-13/32″)
• Available in four different torque levels: 1.4 N·m (HG-TB7), 4 N·m (HG-TB20), 6 N·m (HG-TB30) and 9 N·m (HG-TB45)
• Easy installation, stable
• Set of one left and one right torque hinge
• HG-TB45L for the left side
• HG-TB45R for the right side
• Constant torque in both directions of movement
• Stepless free-stop function
• Opening angle up to 360°
• For horizontal mounting
• Main Material Stainless Steel SUS430
• Operating temperature from 0 °C to 40 °C
• Tested in-house with 20,000 opening and closing cycles
• Mirror-image left-right design
• Suitable for technical and industrial applications
• Material thickness: 3 mm (1/8″)
• Natural (unprocessed)
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from Sugatsune / LAMP®.

Surface:

• Natural (unprocessed)
• The material surface remains visible and is not covered by an additional coating

Assembly:

• First, the fastening positions on the flap and on the body or device housing must be marked and pre-drilled using the technical dimensional drawing
• The HG-TB45L is mounted on the left side and the HG-TB45R on the right side
• Both hinge axes must be exactly at the same height, aligned horizontally and aligned with each other
• For the required alignment margin, the mounting holes must be made slightly excessive according to the manufacturer’s specifications with a tolerance of C0.5
• The vertical legs are securely fastened with M5 countersunk screws and the horizontal legs with M5 pan head or cylinder head screws
• The flap must then be operated over the entire range of motion and the safe positioning in different opening positions must be checked

Dimensions:

• The measurements apply to the left and right hinges; the two versions are mirror images
• Torque hinge height: 61 mm (2-13/32″)
• Depth: 53 mm (2-3/32″)
• Width: 24.5 mm (31/32″)

For more dimensions and details , see technical drawing.

Material:

• HG-TB45 friction hinges are made of high-quality SUS430 stainless steel (1.4016 or X6Cr17)
• SUS430 (1.4016) stainless steel provides solid corrosion resistance for dry to moderately humid interiors, making it well suited for furniture and industrial hardware without chloride exposure
• It is ferromagnetic and therefore ideal for magnetic latches, locking mechanisms and counterplates

Included in delivery:

• 1 set of torque hinges HG-TB45 (HG-TB45L and HG-TB45R) made of high-quality stainless steel SUS430, natural (unprocessed)
• This item does not include mounting screws

Watch the product video:

Manufacturer’s part numbers:

• Item ID: HG-TB45L and HG-TB45R (alternatively: 170-012-418 and 170-012-417)
• Item number: HG-TB45
• GTIN number (EAN, UPC): 4510932004121 and 4510932004138

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Stable flap support for fold-ups, kitchen furniture and much more.

Version: right. Only the right side is included.

The HDS-30MR-WT (180-109-272) flap support is a soft-down flap holder for upward-opening wooden furniture flaps.

It slows down the closing movement of the flap and thus prevents it from slamming hard.

The integrated catch mechanism holds the flap securely to the body in the closed position.

In the open position, the fitting supports a stable end position with an opening angle of 80°.

With a torque of 19.6 to 24.4 N·m per pair, this version is suitable for medium-sized and medium-heavy lifters.

The fitting can be combined with piano hinges, rag hinges or a suitable pot hinge and enables controlled, high-quality flap movement in furniture construction.

The high-quality HDS-30MR-WT flap fittings are perfect for, among other things:

• Furniture flaps
• Wooden flaps
• Cabinet flaps
• Wall cabinets
• Wall cabinets
• Living room furniture
• Flip up
• Kitchen furniture

Technical details:

• Version: right
• Weight: 294 g
• Load capacity (load capacity): 9.75 N (1 kp)
• Size: 140 mm (5-33/64″)
• Torque 19.6 to 24.4 N·m per pair, for medium-sized and medium-duty flaps
• Easy installation, stable
• For upward-opening wooden flaps
• Soft-down function when closing
• Integrated damper against slamming
• Integrated catch mechanism for closed position
• Hold function in fully open position
• Tested for 50,000 opening and closing cycles
• Beam angle 80°
• Suitable for piano strap, rag strap or cup hinge
• White
• robust
• High brand quality from Sugatsune / LAMP®.

Surface:

• White
• White finishes convey a clean and modern aesthetic
• The colour white reflects light effectively, making rooms look brighter and visually larger
• In addition, white objects are inconspicuous and easy to clean, which makes them particularly practical for everyday use
• Lever arm of the flap fitting: nickel-plated

Assembly:

• The fastening is done using the six screws included in the scope of delivery (self-tapping pan head screw 3.5 x 15 mm)
• First, the torque of the flap must be calculated and checked so that the design fits the weight and height of the flap
• After that, the hinges must be installed correctly, and the flap must be able to open and close smoothly before installing the flap holder
• The flap support HDS-30MR-WT is attached to the right side of the carcase according to the assembly drawing with screws ⌀ 3.5 x 15 mm
• The flap holder has 3 mounting holes. The distance between the mounting holes is 126 mm (4-61/64″) and 28 mm (1-7/64″)
• The distance between the center of the fitting and the inner front edge is 35 mm (1-3/8″)
• The mounting plate is first only pre-fixed via the slotted hole on the flap
• The flap is then opened and closed so that the position of the mounting plate can be adjusted so that the movement runs smoothly and smoothly
• Finally, the mounting plate is screwed firmly over the round holes and all screws are checked for tightness. The distance between the mounting holes is 32 mm (1-17/64″) (for more details, see assembly drawing)

Dimensions:

• Length of flap fitting: 140 mm (5-33/64″)
• Width: 40 mm (1-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details , see technical drawing.

Material:

• The HDS-30MR-WT flap fittings are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece Flap holder HDS-30MR-WT (180-109-272) made of metal and robust plastic, white, version: right
• 6 pieces self-tapping pan head screw 3.5 x 15 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 180-109-272
• Item number: HDS-30MR-WT
• GTIN number (EAN, UPC): 4510932024242

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Stable flap support for fold-ups, kitchen furniture and much more.

Version: left. Only the left side is included.

The HDS-30ML-WT (180-109-273) flap support is a soft-down flap holder for upward-opening wooden furniture flaps.

It slows down the closing movement of the flap and thus prevents it from slamming hard.

The integrated catch mechanism holds the flap securely to the body in the closed position.

In the open position, the fitting supports a stable end position with an opening angle of 80°.

With a torque of 19.6 to 24.4 N·m per pair, this version is suitable for medium-sized and medium-heavy lifters.

The fitting can be combined with piano hinges, rag hinges or a suitable pot hinge and enables controlled, high-quality flap movement in furniture construction.

The high-quality HDS-30ML-WT flap fittings are perfect for, among other things:

• Furniture flaps
• Wooden flaps
• Cabinet flaps
• Wall cabinets
• Wall cabinets
• Living room furniture
• Flip up
• Kitchen furniture

Technical details:

• Version: left
• Weight: 294 g
• Load capacity (load capacity): 9.75 N (1 kp)
• Size: 140 mm (5-33/64″)
• Torque 19.6 to 24.4 N·m per pair, for medium-sized and medium-duty flaps
• Easy installation, stable
• For upward-opening wooden flaps
• Soft-down function when closing
• Integrated damper against slamming
• Integrated catch mechanism for closed position
• Hold function in fully open position
• Tested for 50,000 opening and closing cycles
• Beam angle 80°
• Suitable for piano strap, rag strap or cup hinge
• White
• robust
• High brand quality from Sugatsune / LAMP®.

Surface:

• White
• White finishes convey a clean and modern aesthetic
• The colour white reflects light effectively, making rooms look brighter and visually larger
• In addition, white objects are inconspicuous and easy to clean, which makes them particularly practical for everyday use
• Lever arm of the flap fitting: nickel-plated

Assembly:

• The fastening is done using the six screws included in the scope of delivery (self-tapping pan head screw 3.5 x 15 mm)
• First, the torque of the flap must be calculated and checked so that the design fits the weight and height of the flap
• After that, the hinges must be installed correctly, and the flap must be able to open and close smoothly before installing the flap holder
• The HDS-30ML-WT flap support is attached to the left side of the carcase with screws ⌀ 3.5 x 15 mm according to the assembly drawing
• The flap holder has 3 mounting holes. The distance between the mounting holes is 126 mm (4-61/64″) and 28 mm (1-7/64″)
• The distance between the center of the fitting and the inner front edge is 35 mm (1-3/8″)
• The mounting plate is first only pre-fixed via the slotted hole on the flap
• The flap is then opened and closed so that the position of the mounting plate can be adjusted so that the movement runs smoothly and smoothly
• Finally, the mounting plate is screwed firmly over the round holes and all screws are checked for tightness. The distance between the mounting holes is 32 mm (1-17/64″) (for more details, see assembly drawing)

Dimensions:

• Length of flap fitting: 140 mm (5-33/64″)
• Width: 40 mm (1-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details , see technical drawing.

Material:

• The HDS-30ML-WT flap fittings are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece Flap holder HDS-30ML-WT (180-109-273) made of metal and robust plastic, white, version: left
• 6 pieces self-tapping pan head screw 3.5 x 15 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 180-109-273
• Item number: HDS-30ML-WT
• GTIN number (EAN, UPC): 4510932024235

Manufacturer: Sugatsune / LAMP® (Japan)