Application:

Soft fixed castor for furniture, cabinets, roll containers, shelves, side tables and much more.

The fixed castor 08.12.150-1 from SISO serves as a robust castor for movable furniture, equipment and smaller transport structures.

The ⌀50 mm (1-31/32″) wheel with grey soft rubber tread allows for smooth and soil-friendly running and is particularly recommended for hard ground surfaces.

The fixed roller fork allows the wheel to move in one direction in a targeted manner and thus offers stable tracking.

The 45 x 45 mm (1-49/64″) screw-on plate enables compact and resilient attachment to furniture floors and substructures.

With a dynamic load capacity of 30 kg per castor, the fixed castor is also suitable for comparatively heavy furniture and mobile installations.

The combination of galvanized steel and a soft rubber tread combines a robust construction with pleasant running characteristics and is particularly suitable for furniture, shop and interior design.

The high-quality furniture castors 08.12.150-1 are perfect for, among other things:

• Serving trolley
• Devices
• Transport trolley
• Sales displays
• mobile furniture
• Furniture
• Cupboards
• Containers
• Shelves
• Side Tables

Technical details:

• Weight: 102.5 g (for 4 pieces: 410 g)
• Load capacity (load capacity): 120 kg (265 lbs) – for 4 pieces
• Diameter: ⌀50 mm (1-31/32″)
• Easy installation, stable
• Dynamic load capacity 30 kg
• Static load capacity 45 kg
• Fixed, non-swivelling roller fork
• Metal parts made of 1.5 mm thick steel
• Metal parts bright galvanized
• Grey tread made of soft rubber
• Suitable for hard floor surfaces
• Without brake
• Galvanized
• steel, robust
• High brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion
• Wheel core: black
• Tread: grey

Assembly:

• Fastening is done with wood screws ⌀4.5 to 5 mm (not included)
• First of all, the desired position of the fixed castor on the underside of the piece of furniture must be determined
• Then the 45 x 45 mm (1-49/64″) screw-on plate is aligned and the position of the four mounting holes is marked with a hole spacing of 30 x 30 mm (1-3/16″)
• In the case of wood and wood-based materials, the screw holes should be pre-drilled if necessary, depending on the material used
• The fixed castor is then firmly screwed to the furniture floor with four suitable wood screws through the ⌀5.5 mm (7/32″) mounting holes
• If there are several castors, the fixed castors must be aligned parallel to each other so that the piece of furniture runs cleanly straight ahead

Dimensions:

• Wheel diameter: ⌀50 mm (1-31/32″)
• Wheel width: 20 mm (25/32″)
• Height: 73 mm (2-7/8″)
• Bolt-on plate: 45 x 45 mm (1-49/64″)
• Plate thickness: 1.5 mm (1/16″)
• Hole spacing: 30 x 30 mm (1-3/16″)
• Mounting hole diameter: ⌀5.5 mm (7/32″)

For more dimensions and details , see technical drawing.

Material:

• The furniture castors 08.12.150-1 are made of robust steel
• Fork and bolt-on plate: sheet steel, 1.5 mm
• Surface of metal parts: bright galvanized
• Tread: Soft rubber
• Steel is ideal for furniture fittings and industrial fittings because it is both robust and durable, which ensures high resilience and long service life of the fittings

Included in delivery:

• 4 pieces fixed castor 08.12.150-1 made of robust steel, galvanized, 50 mm (1-31/32″)
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 08.12.150-1
• GTIN number (EAN, UPC): 5704866457538

Manufacturer: SISO Denmark

Application:

Robust plug-in hinge for small doors, maintenance hatches, electronics housings and much more.

Version: right. For right-hinged doors and flaps.

The compact B-56-R push-in hinge is used for the movable connection of small doors, flaps and housing parts.

Thanks to the two-part plug-in construction, the door can be lifted off the permanently mounted hinge part if necessary without having to unscrew the hinge.

The right-hand version allows targeted use with the appropriate design: right. For right-hinged doors and flaps. hinged doors and equipment flaps.

With a height of only 35 mm (1-3/8″), the hinge is particularly suitable for compact device housings, measuring instruments as well as electronic and technical equipment.

The cold-rolled steel sheet ensures a stable construction, while the galvanized and chromated surface protects the steel from corrosion.

When using two hinges mounted on top of each other, the B-56-R lift-out hinge is suitable for lightweight doors with a reference weight of 2 kg.

The high-quality B-56-R poster hinges are perfect for, among other things:

• Device Enclosures
• Audio Devices
• Communication Devices
• Measuring instruments
• Small doors
• Maintenance hatches
• Housing

Technical details:

• Version: right
• Weight: 8 g (for 2 pieces: 16 g)
• Load capacity (load capacity): 2 kg (5 lbs) – for 2 pieces
• Height: 35 mm (1-3/8″)
• Available in 2 versions: left (B-56-L) and right (B-56-R)
• Easy installation, stable
• Compact push-in hinge for small doors
• Detachable two-piece construction
• Door or flap can be removed without unscrewing the hinge
• Material thickness: 0.8 mm (1/32″)
• Surface treatment MFZn-C
• 4 mounting holes
• ⌀3 mm (1/8″) hinge pin
• Suitable for measuring instruments and technical devices
• RoHS10 compliant
• Galvanized, yellow
• steel, robust
• High brand quality from TAKIGEN®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The fastening is done with screws with approx. ⌀2.3 to 2.5 mm, preferably with a lens or round head (not included)
• The B-56-R plug-in hinge is positioned on the door or flap and the associated frame or housing
• Pay attention to the right-hand version so that the hinge is mounted to match a right-hinged door or equipment flap
• First, the positions of the four mounting holes must be marked according to the hole pattern
• Depending on the material used, suitable fastening holes or pre-drillings must then be drilled
• The two hinge halves are attached to the movable and fixed component with suitable screws
• The hinge axes of at least two hinges mounted on top of each other must align exactly
• Then the moving part is attached to the hinge pin from above
• To remove the door or flap, it is lifted and removed from the permanently mounted hinge part

Dimensions:

• Total height of lifting hinge B-56-R: 35 mm (1-3/8″)
• Overall width, unfolded: 24 mm (15/16″)
• Material thickness: 0.8 mm (1/32″)
• Vertical hole spacing: 19 mm (3/4″)
• Horizontal hole spacing: 14 mm (35/64″)
• Mounting holes: 4 x ⌀2.5 mm (3/32″)
• Hinge pin: ⌀3 mm (1/8″)
• Outer diameter of the hinge roller: approx. ⌀5 mm

For more dimensions and details , see technical drawing.

Material:

• The B-56-R flagship hinges are made of robust steel
• Steel is ideal for furniture fittings and industrial fittings because it is both robust and durable, which ensures high resilience and long service life of the fittings

Included in delivery:

• 2 pieces B-56-R (10150) plug-in hinge made of robust steel, galvanized, yellow, 35 mm (1-3/8″), version: right
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10150
• Item number: B-56-R

Manufacturer: TAKIGEN (Japan)

Application:

Robust plug-in hinge for small doors, maintenance hatches, electronics housings and much more.

Version: left. For left-hinged doors and flaps.

The compact push-in hinge B-56-L is used for the movable connection of small doors, flaps and housing parts.

Thanks to the two-part plug-in construction, the door can be lifted off the permanently mounted hinge part if necessary without having to unscrew the hinge.

The left-hand version enables targeted use with doors and equipment flaps hinged accordingly to the left.

With a height of only 35 mm (1-3/8″), the hinge is particularly suitable for compact device housings, measuring instruments as well as electronic and technical equipment.

The cold-rolled steel sheet ensures a stable construction, while the galvanized and chromated surface protects the steel from corrosion.

When using two hinges mounted on top of each other, the B-56-L lifting hinge is suitable for lightweight doors with a reference weight of 2 kg.

The high-quality B-56-L poster hinges are perfect for, among other things:

• Device Enclosures
• Audio Devices
• Communication Devices
• Measuring instruments
• Small doors
• Maintenance hatches
• Housing

Technical details:

• Version: left
• Weight: 8 g (for 2 pieces: 16 g)
• Load capacity (load capacity): 2 kg (5 lbs) – for 2 pieces
• Height: 35 mm (1-3/8″)
• Available in 2 versions: left (B-56-L) and right (B-56-R)
• Easy installation, stable
• Compact push-in hinge for small doors
• Detachable two-piece construction
• Door or flap can be removed without unscrewing the hinge
• Material thickness: 0.8 mm (1/32″)
• Surface treatment MFZn-C
• 4 mounting holes
• ⌀3 mm (1/8″) hinge pin
• Suitable for measuring instruments and technical devices
• RoHS10 compliant
• Galvanized, yellow
• steel, robust
• High brand quality from TAKIGEN®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The fastening is done with screws with approx. ⌀2.3 to 2.5 mm, preferably with a lens or round head (not included)
• The B-56-L push-in hinge is positioned on the door or flap and the associated frame or housing
• Pay attention to the left-hand version so that the hinge is mounted to match a left-hinged door or equipment flap
• First, the positions of the four mounting holes must be marked according to the hole pattern
• Depending on the material used, suitable fastening holes or pre-drillings must then be drilled
• The two hinge halves are attached to the movable and fixed component with suitable screws
• The hinge axes of at least two hinges mounted on top of each other must align exactly
• Then the moving part is attached to the hinge pin from above
• To remove the door or flap, it is lifted and removed from the permanently mounted hinge part

Dimensions:

• Total height of the lifting hinge B-56-L: 35 mm (1-3/8″)
• Overall width, unfolded: 24 mm (15/16″)
• Material thickness: 0.8 mm (1/32″)
• Vertical hole spacing: 19 mm (3/4″)
• Horizontal hole spacing: 14 mm (35/64″)
• Mounting holes: 4 x ⌀2.5 mm (3/32″)
• Hinge pin: ⌀3 mm (1/8″)
• Outer diameter of the hinge roller: approx. ⌀5 mm

For more dimensions and details , see technical drawing.

Material:

• The B-56-L flagship hinges are made of robust steel
• Steel is ideal for furniture fittings and industrial fittings because it is both robust and durable, which ensures high resilience and long service life of the fittings

Included in delivery:

• 2 pieces plug-in hinge B-56-L (10149) made of robust steel, galvanized, yellow, 35 mm (1-3/8″), version: left
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10149
• Item number: B-56-L

Manufacturer: TAKIGEN (Japan)

Application:

Practical impact sleeve with waistband for furniture connections and much more.

The practical impact sleeve 8066705 with M6 internal thread and wide collar is perfect for resilient and detachable connections in wood-based materials such as chipboard, MDF or multiplex.

Thanks to the circumferential grooves, the self-clinching nut with internal thread M6 offers 8066705 secure hold in the drill hole and is particularly easy to install – by pressing in or driving in lightly, without any special tools.

Advantages:
– Quick and safe assembly
– No damage to the workpiece due to external threads

– Ideal for removable furniture connections- Rust protection due to zinc
plating- Flange prevents slipping into the material

The impact sleeves are also suitable for repairs or retrofits on existing furniture.

The grooved shaft and wide collar ensure a secure fit in the prepared bore and support even force distribution.

The high-quality impact joints 8066705 are perfect for, among other things:

• Shelving system
• Bed
• Carcase furniture
• DIY project with wooden panels
• Living room furniture
• Office furniture
• Furniture Connections

Technical details:

• Weight: 5.2 g
• Size: 13.6 mm (17/32″)
• Easy installation, practical, stable
• Female thread: M6
• The socket is available in three thread variants: M6, M8 and M10
• With wide flange for high pull-out strength
• galvanized
• Required Drilling Diameter: ⌀8 mm (5/16″)
• Steel
• Design: wide cap nut with grooved press-fit shank
• robust
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• For assembly, the press-fit nut 8066705 with M6 internal thread is pressed into the prepared bore or driven in slightly
• For assembly, a hole with a diameter of ⌀8 mm (5/16″) is drilled and the self-clinching nut is then pressed in or slightly driven in (for further details, see assembly drawing)

Dimensions:

• Fret Outer Diameter: ⌀17/32″ (13.6 mm)
• Outer diameter of socket: ⌀8.7 mm (11/32″)
• Overall Length: 15.4 mm (39/64″)

For more dimensions and details, see technical drawing.

Material:

• The impact sleeves 8066705 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 20 pieces press-fit nut with internal thread M6 8066705 made of robust steel, galvanized
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 8066705
• EAN number: 8432393120751

Manufacturer: EMUCA

Application:

Practical table leg angle for table frames, table legs, dining tables and much more.

Design: 1 hole for central mounting. This variant has 1 hole for central attachment

The table leg bracket 11.07.040-1 connects a table leg with two table frames running at right angles to each other.

Its angled shape pulls the frames together in the corner and increases the rigidity of the table frame.

The central mount allows the table leg to be attached via an M8 or M10 bolt.

Six screw holes on the sides ensure an even distribution of force in the wooden frames.

The 2 mm (5/64″) thick steel sheet offers a resilient and permanently dimensionally stable connection.

The galvanised surface protects the fitting from corrosion in the usual interior of furniture and enables unobtrusive installation on the inside of the table frame.

The high-quality table angle fittings 11.07.040-1 are perfect for, among other things:

• Kitchen Tables
• Desks
• Wooden tables
• Workbenches
• Table Frames
• Table frames
• Table legs
• Dining tables

Technical details:

• Design: 1 hole for central attachment
• Weight: 146 g (for 4 pieces: 584 g)
• Width: 126 mm (4-61/64″)
• Available in 13 different sizes and designs
• Easy installation, stable
• Made of 2 mm (5/64″) thick steel
• Galvanized surface
• Central mount for M8 or M10 bolts
• Concealed mounting on the inside of the table frame
• For right-angled rib corners
• Reinforced and profiled construction
• Suitable for detachable table leg connections
• Galvanized, yellow
• steel, robust
• High brand quality from UMAXO®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The fastening is done with e.g. 6 x wood screws or chipboard screws with pan head, 1 x M8 or M10 hanger bolt or threaded bolt (not included)
• The 11.07.040-1 table leg bracket has 6 mounting holes: ⌀5 mm (13/64″) and a central mounting opening: for M8 or M10 bolts
• The exact length of the wood screws must be adapted to the thickness of the table frame. The screws must not penetrate the outside of the frame
• First, the two table frames must be aligned at right angles to the table leg and temporarily fixed
• The frame angle is inserted from the inside into the corner between the two frames
• The fitting is then attached to the table frames through the six side holes with matching wood screws
• Then the M8 or M10 hanger bolt of the table leg is passed through the central opening and evenly tightened with a washer and a suitable nut
• Finally, the right-angled alignment of the table leg and the tight fit of all screw connections must be checked (for more details, see assembly drawing)

Dimensions:

• Total width of the table leg angle: 126 mm (4-61/64″)
• Height: 60 mm (2-23/64″)
• Center bridge width: 58 mm (2-9/32″)
• Depth of side legs: 48 mm (1-57/64″)

For more dimensions and details , see technical drawing.

Material:

• The table angle fittings 11.07.040-1 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 4 pieces table leg bracket 11.07.040-1 made of robust steel, galvanized, yellow, 126 mm (4-61/64″), version: 1 hole for central mounting
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 11.07.040-1 (alternative: 11.07.040-2)
• GTIN number (EAN, UPC): 5704866015769

Manufacturer: SISO Denmark

Application:

Foldable table leg attachment for low tables, coffee tables, wooden table legs and much more.

The table leg folding fitting B205-KTL-BK is a compact metal fitting for folding table legs on low tables with leg lengths of up to 300 mm (11-13/16″).

The table leg attachment B205-KTL-BK connects the table leg stably to the table top and allows the leg to be folded in a space-saving manner.

The integrated lever makes the folding mechanism easy to unlock and operate.

The B205-KTL-BK folding table leg fitting is particularly suitable for furniture that needs to be stored flat or space-saving after use.

The sturdy steel construction ensures a reliable connection between leg and tabletop.

The fitting is a practical solution for low tables and flexible furniture constructions with foldable table legs indoors.

The high-quality table leg folding fittings B205-KTL-BK are perfect for, among other things:

• Folding legs
• mobile furniture
• Space-saving furniture
• low tables
• Coffee Tables
• Wooden Table Legs

Technical details:

• Weight: 200 g
• Size: 71 mm (2-51/64″)
• Available in 2 surface colours: yellow galvanised or black
• Easy installation, stable
• suitable for low tables
• Compact design
• Stable metal mechanism
• Material thickness: 2.6 mm (7/64″)
• Table leg can be folded by lever
• suitable for table legs from approx. 50 x 50 mm (1-31/32″)
• Suitable for table legs up to approx. 300 mm (11-13/16″) high
• Fastening via several screw points
• Galvanized, yellow
• steel, robust
• High brand quality from Kojima (Japan)

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The fastening is done with a semi-round head screw ⌀3.5 mm. Flat round head screws are not suitable (not included)
• A gap of approx. 0.5 mm must be provided between the table top and the table leg. Without this small distance, the fitting cannot lock correctly
• The table leg attachment has 11 mounting holes with a diameter of ⌀4.5 mm (11/64″)
• The table leg folding fitting B205-KTL-BK is first attached to the table leg with five fastening screws when locked
• Then the leg is fixed to the tabletop at four marked attachment points with screws
• Then the leg is folded in and the two other attachment points are screwed together (for more details, see assembly drawing)

Dimensions:

• Length of the table leg folding fitting: 71 mm (2-51/64″)
• Depth: 63 mm (2-31/64″)
• Width: 53 mm (2-3/32″)

For more dimensions and details , see technical drawing.

Material:

• The table leg hinged fittings B205-KTL-BK are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 4 pieces table leg hinged fitting B205-KTL-BK made of robust steel, galvanized, yellow
• This item does not include mounting screws

Watch the product video:

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: B205-KTL-BK
• GTIN number (EAN, UPC): 0618455525476

Manufacturer: Kojima (Japan)

Weight: 9 g

Material: Steel

Surface: Galvanized

Features:

• Robust
• Corrosion resistant

Manufacturer’s reference number:

• Article ID: CS-401-40
• Item number: 120-040-535
• GTIN number (EAN, UPS): 4510932048903

Included in delivery:

• 1 piece CS-401-40 connection system

Further information:

• Manufacturer’s catalog page

Manufacturer: von Sugatsune / LAMP® (Japan)

Application:

Carcase rail for drawers, replacements, repairs and much more.

Only the right side is included.

The guide rail F091075477 can be used as a replacement for a defective DWD-XP carcass rail from the manufacturer GRASS.

This guide rail fits the DWD-XP and DWD Agantis drawers from the manufacturer GRASS.

It has self-closing and soft-close retraction damping.

The high-quality pull-out slides F091075477 are perfect for, among other things:

• DWD-XP
• Agantis
• Drawer
• Replacement
• Repair

Technical details:

• Version: right
• Weight: 1036 g
• Load capacity (load capacity): 40 kg (89 lbs)
• Nominal length: 500 mm (19-11/16″)
• Easy installation, stable
• Galvanized
• steel, robust
• High brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• First, the drawer is dismantled
• After that, the old guide rail will be removed
• The screws used to mount the original carcass rail are used to mount the new guide rail
• The new carcass rail is installed. The screws used to mount the original carcass rail are reused
• Then the drawer is put back on and opened and closed a few times for testing

Material:

• The extension rails F091075477 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 1 piece guide rail F091075477 made of robust steel, galvanized, 500 mm (19-11/16″), version: right
• This item does not include mounting screws

Watch the product video:

Manufacturer’s part numbers:

• Item ID: F091075477 (alternative: F091075488)
• GTIN number (EAN, UPS): 9007181151577

Manufacturer: GRASS

Application:

Carcase rail for drawers, replacements, repairs and much more.

Only the left side is included.

The guide rail F091075477 can be used as a replacement for a defective DWD-XP carcass rail from the manufacturer GRASS.

This guide rail fits the DWD-XP and DWD Agantis drawers from the manufacturer GRASS.

It has self-closing and soft-close retraction damping.

The high-quality pull-out slides F091075477 are perfect for, among other things:

• DWD-XP
• Agantis
• Drawer
• Replacement
• Repair

Technical details:

• Version: left
• Weight: 1036 g
• Load capacity (load capacity): 40 kg (89 lbs)
• Nominal length: 500 mm (19-11/16″)
• Easy installation, stable
• Galvanized
• steel, robust
• High brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• First, the drawer is dismantled
• After that, the old guide rail will be removed
• The screws used to mount the original carcass rail are used to mount the new guide rail
• The new carcass rail is installed. The screws used to mount the original carcass rail are reused
• Then the drawer is put back on and opened and closed a few times for testing

Material:

• The extension rails F091075477 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 1 piece guide rail F091075477 made of robust steel, galvanized, 500 mm (19-11/16″), version: left
• This item does not include mounting screws

Watch the product video:

Manufacturer’s part numbers:

• Article ID: F091075477 (alternatively: F091075487)
• GTIN number (EAN, UPS): 9007181151577

Manufacturer: GRASS

Usage:

Rectangular connecting plate, with four sharp teeth 8200505 for wooden panels, furniture, cabinets, wooden shelves.

Rectangular dowels, press-fit dowels with teeth on one side.

The high-quality wooden connectors 8200505 have a rectangular shape and four sharp teeth (nails) at the corners and a mounting hole in the middle for secure fastening.

The sharp claws of the rectangular mounting bracket ensure that the wooden panels do not move when the screw is tightened.

The connecting plate 8200505 is perfect for, among other things:

• Wooden panels
• Furniture
• Cupboards
• Wooden shelves

Technical details:

• Weight: 2.5 g
• Length: 18 mm (55/64″)
• Stable
• Suitable for concealed panel joints on wooden panels and shelves
• Robust
• Galvanized
• High brand quality from UMAXO®

Surface:

• Galvanized

Assembly:

• To screw on

Dimensions:

• Wood connector length: 22 mm (55/64″)
• Width: 18 mm (45/64″)
• Mounting hole diameter: ⌀4 mm (5/32″)
• Length of teeth: 4 mm (5/32″)

For more dimensions and details, see technical drawing.

Manufacture:

• The high-quality wooden connectors 8200505 are made of steel

Included in delivery:

• 10 pieces of wooden connectors 8200505 made of sturdy steel, galvanized

Manufacturer’s part numbers:

• Product identification number: 8200505
• EAN number: 8432393121499

Manufacturer: EMUCA