Application:

For replacing or repairing an already installed GRASS Hetal Kinvaro F-20 Type 6C flap fitting in a kitchen (for example, for some models from the manufacturer Nobilia Küchen).

An economical and environmentally friendly solution when only one side of the flap fitting is defective and the other side is functional.

Properties:

• Flap is securely held in place in any position
• Particularly easy movement sequence
• Adjustable spring force
• Built-in adjustable closing damping
• Pre-assembled Euro screws and positioning pins for easy mounting of the fitting on the side wall
• Integrated opening limit can be adjusted up to 90°
• Fast, tool-free clip front mounting

3-dimensional adjustment of the flap by direct adjustment:

• Height adjustment: ±1.5 mm
• Side adjustment: ±1.5 mm
• Tilt adjustment: ±1.5 mm
• The joint can also be adjusted 3-dimensionally by direct adjustment

The scope of delivery includes:

• 1 piece flap fitting (left side)
• 1 piece grey cover cap (for left side)

We will be happy to help you choose!

Made by
GRASS
in Germany

Download installation instructions for GRASS Kinvaro F-20 flap fittings!

Download the adjustment instructions for the GRASS Kinvaro F-20 flap fitting!

Watch installation videos for GRASS Kinvaro F-20 flap fittings!

Download the information brochure for GRASS Kinvaro flap fittings!

Download the GRASS Kinvaro flap fittings product catalogue!

Download CAD data for GRASS Kinvaro F-20 flap fittings!

Application:

For replacing or repairing an already installed GRASS Hetal Kinvaro F-20 Type 6C flap fitting in a kitchen (for example, for some models from the manufacturer Nobilia Küchen).

An economical and environmentally friendly solution when only one side of the flap fitting is defective and the other side is functional.

Properties:

• Flap is securely held in place in any position
• Particularly easy movement sequence
• Adjustable spring force
• Built-in adjustable closing damping
• Pre-assembled Euro screws and positioning pins for easy mounting of the fitting on the side wall
• Integrated opening limit can be adjusted up to 90°
• Fast, tool-free clip front mounting

3-dimensional adjustment of the flap by direct adjustment:

• Height adjustment: ±1.5 mm
• Side adjustment: ±1.5 mm
• Tilt adjustment: ±1.5 mm
• The joint can also be adjusted 3-dimensionally by direct adjustment

The scope of delivery includes:

• 1 piece flap fitting (right side)
• 1 piece grey cover cap (for right side)

We will be happy to help you with the choice

Made by
GRASS
in Germany

Download installation instructions for GRASS Kinvaro F-20 flap fittings!

Download the adjustment instructions for the GRASS Kinvaro F-20 flap fitting!

Watch installation videos for GRASS Kinvaro F-20 flap fittings!

Download the information brochure for GRASS Kinvaro flap fittings!

Download the GRASS Kinvaro flap fittings product catalogue!

Download CAD data for GRASS Kinvaro F-20 flap fittings!

The Kinvaro F-20 Type 6C folding flap fitting from the manufacturer GRASS or Hetal is the original spare part for kitchen wall units in which exactly this model is already installed.

It replaces defective or worn fittings of the same type 1:1 and restores the full function of the existing folding flap elements.

Thanks to identical dimensions and drilling patterns, the fitting can be mounted on the body or front without any additional adjustments.

The integrated opening support and soft-close damping ensure quiet, controlled opening and closing again after replacement.

Properties:

• With grey cover caps
• Flap is securely held in place in any position
• Particularly easy movement sequence
• Adjustable spring force
• Built-in adjustable closing damping
• Pre-assembled Euro screws and positioning pins for easy mounting of the fitting on the side wall
• The integrated opening limit can be adjusted up to 90°
• Fast, tool-free clip front mounting

3-dimensional adjustment of the flap by direct adjustment:

• Height adjustment: ±1.5 mm
• Side adjustment: ±1.5 mm
• Tilt adjustment: ±1.5 mm
• The joint can also be adjusted 3-dimensionally by direct adjustment

The scope of delivery includes:

• 1 piece flap fitting, right
• 1 piece flap fitting, left
• 1 piece cover cap, grey, right
• 1 piece cover cap, grey, left

We will be happy to help you choose!

Made by
GRASS
in Germany

Download installation instructions for GRASS Kinvaro F-20 flap fittings!

Download the adjustment instructions for the GRASS Kinvaro F-20 flap fitting!

Watch installation videos for GRASS Kinvaro F-20 flap fittings!

Download the information brochure for GRASS Kinvaro flap fittings!

Download the GRASS Kinvaro flap fittings product catalogue!

Download CAD data for GRASS Kinvaro F-20 flap fittings!

Swivel flap fitting (ONLY the left side) with opening support and adjustable closing damping, incl. grey cover cap.

To replace or repair an already installed GRASS Hetal Kinvaro S-35 Type 4 / D flap fitting in a kitchen (e.g. for some models from the manufacturer Nobilia Küchen).

This right Kinvaro S-35, Type 4 / D swivel flap fitting replaces the original fitting 1:1 and restores the complete function of the existing swing flap.

Thanks to identical dimensions and drilling patterns, it can be mounted on the body or front without reworking.

The integrated opening support and soft-close damping then again ensure quiet, controlled opening and closing.

An economical and environmentally friendly solution when only one side of the flap fitting is defective and the other side is functional.

Properties:

• Allows the use of wreath profiles, gallery floors and countertop luminaires
• Flap is securely held in any position from an opening angle of 45°
• Particularly easy movement sequence
• The spring force is adjustable
• Built-in adjustable closing damping
• Wide range of applications for a wide variety of flap materials

Assembly:

• Fast, tool-free clip mounting of the front
• Pre-assembled Euro screws and positioning pins for easy mounting of the fitting on the side wall
• After the front has been clipped in, the spring force is fine-tuned with a Torx wrench

Three-dimensional adjustment of the flap by direct adjustment:

• Height adjustment: ±1.5 mm
• Side adjustment: ±1.5 mm
• Tilt adjustment: ±1.5 mm

The scope of delivery includes:

• 1 piece flap fitting, left side
• 1 piece cover cap, grey, left side

Please choose the right power accumulator!

We will be happy to help you make the right choice.

Made by GRASS in Germany

Download installation instructions for GRASS Kinvaro S-35 flap fittings!

Download the adjustment instructions for the GRASS Kinvaro S-35 flap fitting!

Watch installation videos for GRASS Kinvaro S-35 flap fittings!

Download the information brochure for GRASS Kinvaro flap fittings!

Download the GRASS Kinvaro flap fittings product catalogue!

Download CAD data for GRASS Kinvaro S-35 flap fittings!

Manufacturer:
GRASS GmbH

Application:

Swivel flap fitting (ONLY the right side) with opening support and adjustable closing damping, incl. grey cover cap.

To replace or repair an already installed GRASS Hetal Kinvaro S-35 Type 4 / D flap fitting in a kitchen (e.g. for some models from the manufacturer Nobilia Küchen).

This right Kinvaro S-35, Type 4 / D swivel flap fitting replaces the original fitting 1:1 and restores the complete function of the existing swing flap.

Thanks to identical dimensions and drilling patterns, it can be mounted on the body or front without reworking.

The integrated opening support and soft-close damping then again ensure quiet, controlled opening and closing.

An economical and environmentally friendly solution when only one side of the flap fitting is defective and the other side is functional.

Properties:

• Allows the use of wreath profiles, gallery floors and countertop luminaires
• Flap is securely held in any position from an opening angle of 45°
• Particularly easy movement sequence
• The spring force is adjustable
• Built-in adjustable closing damping
• Wide range of applications for a wide variety of flap materials

Assembly:

• Fast, tool-free clip mounting of the front
• Pre-assembled Euro screws and positioning pins for easy mounting of the fitting on the side wall
• After the front has been clipped in, the spring force is fine-tuned with a Torx wrench

Three-dimensional adjustment of the flap by direct adjustment:

• Height adjustment: ±1.5 mm
• Side adjustment: ±1.5 mm
• Tilt adjustment: ±1.5 mm

The scope of delivery includes:

• 1 piece fitting, right side
• 1 piece cover cap, grey, right side

Please choose the right power accumulator!

We will be happy to help you choose the right spare part.

Download installation instructions for GRASS Kinvaro S-35 flap fittings!

Download the adjustment instructions for the GRASS Kinvaro S-35 flap fitting!

Watch installation videos for GRASS Kinvaro S-35 flap fittings!

Download the information brochure for GRASS Kinvaro flap fittings!

Download the GRASS Kinvaro flap fittings product catalogue!

Download CAD data for GRASS Kinvaro S-35 flap fittings!

Manufacturer:
GRASS GmbH

Swivel flap fitting with opening support and adjustable closing damping, with grey cover caps

Properties:

• Allows the use of wreath profiles, gallery floors and countertop luminaires
• Flap is securely held in any position from an opening angle of 45°
• Particularly easy movement sequence
• The spring force is adjustable
• Built-in adjustable closing damping
• Wide range of applications for a wide variety of flap materials
• Pre-assembled Euro screws and positioning pins for easy mounting of the fitting on the side wall
• Fast, tool-free clip mounting of the front

3-dimensional adjustment of the flap by direct adjustment:

• Height adjustment: ±1.5 mm
• Side adjustment: ±1.5 mm
• Tilt adjustment: ±1.5 mm

The scope of delivery includes:

• 2 x fittings (1 x right and 1 x left)
• 2 x cover caps (1 x right and 1 x left)

Please choose the right power accumulator!

We will be happy to help you make the right choice.

Made by GRASS in Germany

Download installation instructions for GRASS Kinvaro S-35 flap fittings!

Download the adjustment instructions for the GRASS Kinvaro S-35 flap fitting!

Watch installation videos for GRASS Kinvaro S-35 flap fittings!

Download the information brochure for GRASS Kinvaro flap fittings!

Download the GRASS Kinvaro flap fittings product catalogue!

Download CAD data for GRASS Kinvaro S-35 flap fittings!

Manufacturer:
GRASS GmbH