Application:

Corrosion-resistant stainless steel furniture hinge for outdoor furniture and much more.

Design: Mounting plate with 2 mm spacing. Mounting plate with 2 mm spacing, for smaller or reduced print runs.

The Hettich Veosys 105° is a corrosion-resistant stainless steel pot hinge for existing interior and exterior furniture doors.

The integrated damping brakes the door when closing and ensures a quiet, controlled closing process even at low and high outside temperatures.

A self-tightening angle of 35° supports the independent closing of the door and increases ease of use.

Thanks to clip-on technology, the hinge arm can be clipped onto the supplied Veosys mounting plate (height: 2 mm) quickly and without tools.

Support and depth are adjustable directly on the hinge, while height adjustment is done via the mounting plate, allowing the door to be precisely aligned.

The combination of stainless steel, tested corrosion resistance and 105° opening angle is particularly suitable for durable furniture constructions in kitchens, bathrooms, outdoor, wellness, laboratory and contract areas.

The high-quality furniture hinges 9289590 are perfect for, among other things:

• Bathroom
• Laboratory furniture
• Hospital Facilities
• Furniture doors
• Cabinet doors
• Kitchen cabinets
• Gym Furniture
• Wellness furniture
• Garden kitchens
• Outdoor furniture

Technical details:

• Design: Mounting plate with 2 mm distance
• Weight: 95.1 g
• Size: 114.9 mm (4-17/32″)
• Edition: fully surfaced (present)
• Easy installation, stable
• For existing furniture doors
• Beam angle 105°
• Hinged pot with ⌀35 mm
• Pot depth 11.5 mm
• For door thicknesses from 14 to 22 mm
• Drilling pattern TH 52 x 5.5 mm
• With integrated damping
• With automatic closing system
• Auto tightening angle 35°
• With clip-on technology
• Support adjustment ±2.5 mm
• Depth adjustment +2 mm / -1.5 mm
• Height adjustment via the mounting plate
• Corrosion resistant, 120 hours NSS tested
• For indoor and outdoor applications
• For timber frame doors with a profile width of 50 mm or more
• For aluminium frame doors with a profile width of 50 mm or more
• Matching Veosys mounting plate included
• Opening angle can be reduced to 90° with optional limiter
• Natural (unprocessed)
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from Hettich

Surface:

• Natural (unprocessed)
• The material surface remains visible and is not covered by an additional coating

Assembly:

• Fastening is done with 4x stainless steel screws ⌀3.5 x 16 mm with countersunk head (not included)
• The hinge has 2 mounting holes on the hinge cup. First, a cup hole with a depth of ⌀35 mm and 11.5 mm must be made in the furniture door; then the two attachment points are prepared according to the drilling pattern TH 52 x 5.5 mm.
• The cup hinge is attached to the door with two countersunk screws ⌀3.5 x 16 mm.
• Then the supplied Veosys mounting plate (height: 2 mm) is mounted on the furniture body.
• The hinge arm is placed on the mounting plate and snapped into place using the clip-on technique.
• The door support and depth are then adjusted using the adjustment screws on the hinge and the height via the mounting plate. (for more details, see assembly drawing)

Dimensions:

• Overall Length: 114.9 mm (4-17/32″)
• Overall Width: 62.6 mm (2-15/32″)
• Overall Height: 25 mm (63/64″)
• Mounting plate height: 2 mm
• Pot diameter: ⌀35 mm (1-3/8″)
• Pot depth: 11.5 mm (29/64″)
• Drilling pattern: 52 x 5.5 mm (2-3/64″ x 7/32″)
• Pot spacing: 3 – 7 mm (approx. 1/8″ – 9/32″)
• Door thickness: 14 – 22 mm (approx. 35/64″ – 55/64″)
• Minimum profile width for wooden and aluminium frame doors: 50 mm (1-31/32″)
• Beam angle: 105°
• Support adjustment: ±2.5 mm (approx. ±3/32″)
• Depth adjustment: +2 mm / -1.5 mm (approx. +5/64″ / -1/16″)

For more dimensions and details , see technical drawing.

Material:

• The furniture hinges 9289590 are made of solid stainless steel (stainless steel)
• Stainless steel is characterized by high corrosion resistance, durability and mechanical stability
• In addition, it offers increased heat and oxidation resistance compared to conventional steel, making it particularly suitable for demanding furniture fittings and industrial components.

Included in delivery:

• 1 piece stainless steel furniture hinge 9289590 made of solid stainless steel, natural (unprocessed), design: mounting plate with 2 mm distance
• 1 piece cross-shaped mounting plate 9289609, made of stainless steel, height: 2 mm
• 1 piece cover cap 9289610 for hinge arm, made of stainless steel
• This item does not include mounting screws

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Item ID: 9289590 and 9289609
• GTIN number (EAN, UPC): 4023149257445 and 4023149257483

Manufacturer: Hettich

Application:

Corrosion-resistant stainless steel furniture hinge for outdoor furniture and much more.

Design: Mounting plate with 0 mm distance. Mounting plate with distance 0 mm, for normal or larger quantities.

The Hettich Veosys 105° is a corrosion-resistant stainless steel pot hinge for existing interior and exterior furniture doors.

The integrated damping brakes the door when closing and ensures a quiet, controlled closing process even at low and high outside temperatures.

A self-tightening angle of 35° supports the independent closing of the door and increases ease of use.

Thanks to clip-on technology, the hinge arm can be quickly clipped onto the supplied Veosys mounting plate (height: 0 mm) without tools.

Support and depth are adjustable directly on the hinge, while height adjustment is done via the mounting plate, allowing the door to be precisely aligned.

The combination of stainless steel, tested corrosion resistance and 105° opening angle is particularly suitable for durable furniture constructions in kitchens, bathrooms, outdoor, wellness, laboratory and contract areas.

The high-quality furniture hinges 9289590 are perfect for, among other things:

• Bathroom
• Laboratory furniture
• Hospital Facilities
• Furniture doors
• Cabinet doors
• Kitchen cabinets
• Gym Furniture
• Wellness furniture
• Garden kitchens
• Outdoor furniture

Technical details:

• Design: Mounting plate with 0 mm distance
• Weight: 94.7 g
• Size: 114.9 mm (4-17/32″)
• Edition: fully surfaced (present)
• Easy installation, stable
• For existing furniture doors
• Beam angle 105°
• Hinged pot with ⌀35 mm
• Pot depth 11.5 mm
• For door thicknesses from 14 to 22 mm
• Drilling pattern TH 52 x 5.5 mm
• With integrated damping
• With automatic closing system
• Auto tightening angle 35°
• With clip-on technology
• Support adjustment ±2.5 mm
• Depth adjustment +2 mm / -1.5 mm
• Height adjustment via the mounting plate
• Corrosion resistant, 120 hours NSS tested
• Quality classification EN 15570, Level 2
• For indoor and outdoor applications
• For timber frame doors with a profile width of 50 mm or more
• For aluminium frame doors with a profile width of 50 mm or more
• Matching Veosys mounting plate included
• Opening angle can be reduced to 90° with optional limiter
• Natural (unprocessed)
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from Hettich

Surface:

• Natural (unprocessed)
• The material surface remains visible and is not covered by an additional coating

Assembly:

• Fastening is done with 4x stainless steel screws ⌀3.5 x 16 mm with countersunk head (not included)
• The hinge has 2 mounting holes on the hinge cup. First, a cup hole with a depth of ⌀35 mm and 11.5 mm must be made in the furniture door; then the two attachment points are prepared according to the drilling pattern TH 52 x 5.5 mm.
• The cup hinge is attached to the door with two countersunk screws ⌀3.5 x 16 mm.
• Then the supplied Veosys mounting plate (height: 0 mm) is mounted on the furniture body.
• The hinge arm is placed on the mounting plate and snapped into place using the clip-on technique.
• The door support and depth are then adjusted using the adjustment screws on the hinge and the height via the mounting plate. (for more details, see assembly drawing)

Dimensions:

• Overall Length: 114.9 mm (4-17/32″)
• Overall Width: 62.6 mm (2-15/32″)
• Overall Height: 25 mm (63/64″)
• Mounting plate height: 0 mm
• Pot diameter: ⌀35 mm (1-3/8″)
• Pot depth: 11.5 mm (29/64″)
• Drilling pattern: 52 x 5.5 mm (2-3/64″ x 7/32″)
• Pot spacing: 3 – 7 mm (approx. 1/8″ – 9/32″)
• Door thickness: 14 – 22 mm (approx. 35/64″ – 55/64″)
• Minimum profile width for wooden and aluminium frame doors: 50 mm (1-31/32″)
• Beam angle: 105°
• Support adjustment: ±2.5 mm (approx. ±3/32″)
• Depth adjustment: +2 mm / -1.5 mm (approx. +5/64″ / -1/16″)

For more dimensions and details , see technical drawing.

Material:

• The furniture hinges 9289590 are made of solid stainless steel (stainless steel)
• Stainless steel is characterized by high corrosion resistance, durability and mechanical stability
• In addition, it offers increased heat and oxidation resistance compared to conventional steel, making it particularly suitable for demanding furniture fittings and industrial components.

Included in delivery:

• 1 piece stainless steel furniture hinge 9289590 made of solid stainless steel, natural (unprocessed), version: mounting plate with 0 mm distance
• 1 piece cross-shaped mounting plate 9289598, made of stainless steel, height: 0 mm
• 1 piece cover cap for hinge arm 9289610, made of stainless steel
• This item does not include mounting screws

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 9289590 and 9289598
• GTIN number (EAN, UPC): 4023149257445 and 4023149257476

Manufacturer: Hettich

Application:

Robust spring hinge for equipment flaps, housing doors, covers and much more.

The TH-61SUS-1-0.8 spring hinge supports the automatic opening of flaps and lightweight doors through an integrated spring in the hinge pin.

The spring force acts in the direction of opening and thus supports the swinging up of moving components.

In the free position, the hinge is located at 90°, which makes it particularly suitable for equipment flaps, covers and enclosure doors.

Made entirely of SUS304, the construction offers high corrosion resistance and is also suitable for more demanding operating conditions and for long-lasting technical applications.

Four mounting holes allow for easy and secure screw mounting.

The compact dimensions of 32 mm (1-17/64″) x 25 mm (63/64″) allow the spring hinge to be integrated into device, housing and machine designs to save space.

The high-quality TH-61SUS-1-0.8 spring hinges are perfect for, among other things:

• Maintenance hatches
• Machine Enclosures
• Office Equipment
• Communication Devices
• Measuring instruments
• Device flaps
• Enclosure doors
• Covers

Technical details:

• Torque: 12.3 N·m
• Weight: 9.5 g (for 2 pieces: 19 g)
• Size: 32 mm (1-17/64″)
• Available in 4 torques: 1.9 N, 8.8 N, 12.3 N and 12.8 N
• Easy installation, stable
• Spring force in the opening direction
• Spring integrated into the hinge pin
• Free position at 90°
• 4 mounting holes
• ⌀3.2 mm (1/8″) mounting holes
• Material thickness: 1.2 mm (3/64″)
• Compact 32 mm (1-17/64″) x 25 mm (63/64″) design
• Reference spring force at position a: 0.8 N (80 gf)
• Reference spring force at position b: 1.4 N (140 gf)
• Reference spring force at position c: 1.9 N (190 gf)
• Suitable for lightweight doors and flaps
• Natural (unprocessed)
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality of TOCHIGIYA®

Surface:

• Natural (unprocessed)
• The material surface remains visible and is not covered by an additional coating

Assembly:

• The fastening is done with 4 x M3 pan head screws or flat round head screws, preferably made of stainless steel (not included)
• The TH-61SUS-1-0.8 spring strap has 4 mounting holes
• First, the mounting points must be marked according to the hole pattern of 20 mm (25/32″) x 14 mm (35/64″) and the necessary mounting holes must be prepared
• The spring hinge is then attached to the fixed surface with one hinge leaf and to the movable flap or door with the other hinge leaf
• The installation direction must be selected so that the spring force acts in the desired opening direction
• Four M3 pan head screws or screws with ⌀3 mm for wooden surfaces are suitable for fastening
• The screws are tightened evenly without deforming the hinge wings
• Finally, the flap must be moved several times and the desired opening effect of the spring hinge must be checked (for more details, see assembly drawing)

Dimensions:

• Overall width: 32 mm (1-17/64″)
• Overall Height: 25 mm (63/64″)
• Material thickness: 1.2 mm (3/64″)
• Horizontal hole spacing: 20 mm (25/32″)
• Top edge to bore center distance: 7/32″ (5.5 mm)
• Vertical hole spacing: 14 mm (35/64″)
• Mounting holes: 4 x ⌀3.2 mm (1/8″)
• Corner Radius: R1.5 mm (1/16″)
• Hinge pin: ⌀3 mm (1/8″)
• Free Standing: 90°

For more dimensions and details , see technical drawing.

Material:

• The TH-61SUS-1-0.8 spring hinges are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2 pieces spring hinge TH-61SUS-1-0.8 made of solid stainless steel SUS304, natural (unprocessed), 32 mm (1-17/64″)
• This item does not include mounting screws

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: TH-61SUS-1-0.8

Manufacturer: TOCHIGIYA (Japan)

Application:

Robust spring hinge for equipment flaps, housing doors, covers and much more.

The TH-61SUS-3 spring hinge supports the automatic opening of flaps and lightweight doors through an integrated spring in the hinge pin.

The spring force acts in the direction of opening and thus supports the swinging up of moving components.

In the free position, the hinge is located at 90°, which makes it particularly suitable for equipment flaps, covers and enclosure doors.

Made entirely of SUS304, the construction offers high corrosion resistance and is also suitable for more demanding operating conditions and for long-lasting technical applications.

Four mounting holes allow for easy and secure screw mounting.

The compact dimensions of 38 mm (1-1/2″) x 51 mm (2-1/64″) allow the spring hinge to be integrated into device, housing and machine designs to save space.

The high-quality TH-61SUS-3 spring hinges are perfect for, among other things:

• Maintenance hatches
• Machine Enclosures
• Office Equipment
• Communication Devices
• Measuring instruments
• Device flaps
• Enclosure doors
• Covers

Technical details:

• Torque: 12.3 N·m
• Weight: 19 g (for 2 pieces: 38 g)
• Size: 38 mm (1-1/2″)
• Available in 4 torques: 1.9 N, 8.8 N, 12.3 N and 12.8 N
• Easy installation, stable
• Spring force in the opening direction
• Spring integrated into the hinge pin
• Free position at 90°
• 4 mounting holes
• ⌀3.2 mm (1/8″) mounting holes
• Material thickness: 1.5 mm (1/16″)
• Compact 38 mm (1-1/2″) x 51 mm (2-1/64″) design
• Reference spring force at position a: 5.9 N (600 gf)
• Reference spring force at position b: 9.8 N (1000 gf)
• Reference spring force at position c: 12.8 N (1300 gf)
• Suitable for lightweight doors and flaps
• Natural (unprocessed)
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality of TOCHIGIYA®

Surface:

• Natural (unprocessed)
• The material surface remains visible and is not covered by an additional coating

Assembly:

• The fastening is done with 4 x M3 pan head screws or flat round head screws, preferably made of stainless steel (not included)
• The TH-61SUS-3 spring strap has 4 mounting holes
• First, the mounting points must be marked according to the hole pattern of 25 mm (63/64″) x 32 mm (1-17/64″) and the necessary mounting holes must be prepared
• The spring hinge is then attached to the fixed surface with one hinge leaf and to the movable flap or door with the other hinge leaf
• The installation direction must be selected so that the spring force acts in the desired opening direction
• Four M3 pan head screws or screws with ⌀3 mm for wooden surfaces are suitable for fastening
• The screws are tightened evenly without deforming the hinge wings
• Finally, the flap must be moved several times and the desired opening effect of the spring hinge must be checked (for more details, see assembly drawing)

Dimensions:

• Overall width: 38 mm (1-1/2″)
• Overall Height: 51 mm (2-1/64″)
• Material thickness: 1.5 mm (1/16″)
• Horizontal hole spacing: 25 mm (63/64″)
• Top edge to bore center distance: 3/8″ (9.5 mm)
• Vertical hole spacing: 32 mm (1-17/64″)
• Mounting holes: 4 x ⌀3.2 mm (1/8″)
• Corner Radius: R1.5 mm (1/16″)
• Hinge pin: ⌀3 mm (1/8″)
• Free Standing: 90°

For more dimensions and details , see technical drawing.

Material:

• The TH-61SUS-3 spring hinges are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2 pieces spring hinge TH-61SUS-3 made of solid stainless steel SUS304, natural (unprocessed), 38 mm (1-1/2″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: TH-61SUS-3

Manufacturer: TOCHIGIYA (Japan)

Application:

Robust spring hinge for equipment flaps, housing doors, covers and much more.

The TH-61SUS-2 spring hinge supports the automatic opening of flaps and lightweight doors through an integrated spring in the hinge pin.

The spring force acts in the direction of opening and thus supports the swinging up of moving components.

In the free position, the hinge is located at 90°, which makes it particularly suitable for equipment flaps, covers and enclosure doors.

Made entirely of SUS304, the construction offers high corrosion resistance and is also suitable for more demanding operating conditions.

Four mounting holes allow for easy and secure screw mounting.

The compact dimensions of 32 mm (1-17/64″) x 38 mm (1-1/2″) allow the spring hinge to be integrated into device, housing and machine designs to save space.

The high-quality TH-61SUS-2 spring hinges are perfect for, among other things:

• Maintenance hatches
• Machine Enclosures
• Office Equipment
• Communication Devices
• Measuring instruments
• Device flaps
• Enclosure doors
• Covers

Technical details:

• Torque: 12.3 N·m
• Weight: 19 g (for 2 pieces: 38 g)
• Size: 32 mm (1-17/64″)
• Available in 4 torques: 1.9 N, 8.8 N, 12.3 N and 12.8 N
• Easy installation, stable
• Spring force in the opening direction
• Spring integrated into the hinge pin
• Free position at 90°
• 4 mounting holes
• ⌀3.2 mm (1/8″) mounting holes
• Material thickness: 1.5 mm (1/16″)
• Compact 32 mm (1-17/64″) x 38 mm (1-1/2″) design
• Reference spring force at position a: 5.9 N (600 gf)
• Reference spring force at position b: 7.8 N (800 gf)
• Reference spring force at position c: 12.3 N (1250 gf)
• Suitable for lightweight doors and flaps
• Natural (unprocessed)
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality of TOCHIGIYA®

Surface:

• Natural (unprocessed)
• The material surface remains visible and is not covered by an additional coating

Assembly:

• The fastening is done with 4 x M3 pan head screws or flat round head screws, preferably made of stainless steel (not included)
• The TH-61SUS-2 spring strap has 4 mounting holes
• First, the mounting points must be marked according to the hole pattern of 20 mm (25/32″) x 26 mm (1-1/32″) and the necessary mounting holes must be prepared
• The spring hinge is then attached to the fixed surface with one hinge leaf and to the movable flap or door with the other hinge leaf
• The installation direction must be selected so that the spring force acts in the desired opening direction
• Four M3 pan head screws or screws with ⌀3 mm for wooden surfaces are suitable for fastening
• The screws are tightened evenly without deforming the hinge wings
• Finally, the flap must be moved several times and the desired opening effect of the spring hinge must be checked (for more details, see assembly drawing)

Dimensions:

• Overall width: 32 mm (1-17/64″)
• Overall Height: 38 mm (1-1/2″)
• Material thickness: 1.5 mm (1/16″)
• Horizontal hole spacing: 20 mm (25/32″)
• Top edge to bore center distance: 15/64″ (6 mm)
• Vertical hole spacing: 26 mm (1-1/32″)
• Mounting holes: 4 x ⌀3.2 mm (1/8″)
• Corner Radius: R1.5 mm (1/16″)
• Hinge pin: ⌀3 mm (1/8″)
• Free Standing: 90°

For more dimensions and details , see technical drawing.

Material:

• The TH-61SUS-2 spring hinges are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2 pieces spring hinge TH-61SUS-2 made of solid stainless steel SUS304, natural (unprocessed), 32 mm (1-17/64″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Item ID: TH-61SUS-2

Manufacturer: TOCHIGIYA (Japan)

Application:

Robust flat hinge for machine doors, maintenance hatches and much more.

The B-1059-5 (10661) screw-on hinge connects doors or hatches to a body or frame, allowing for easy, permanent rotational movement.

The flat design is particularly suitable for screw-on applications on housings, machine covers and cabinets.

SUS304 stainless steel offers good corrosion resistance, making the hinge suitable for humid or more demanding environments.

The polished surface ensures a clean, high-quality look and makes cleaning easier.

4 countersunk holes enable stable fastening, whereby the screw heads can be largely flush with the hinge blades.

When using two hinges vertically, the reference door weight is up to 4.5 kg (10 lbs) for a door size of 500 mm (19-11/16″) x 250 mm (9-27/32″).

The high-quality flat hinges B-1059-5 are perfect for, among other things:

• Enclosure doors
• Machine covers
• Stainless steel housing
• Control cabinets
• Device flaps
• Cabinet doors
• Machine doors
• Maintenance hatches

Technical details:

• Weight: 8 g (for 2 pieces: 16 g)
• Load capacity (load capacity): 4.5 kg (10 lbs) – for 2 pieces
• Size: 38 mm (1-1/2″)
• Available in 5 sizes: 38 mm, 51 mm, 64 mm, 76 mm and 89 mm
• Easy installation, stable
• Material thickness 0.8 mm (1/32″)
• 4 recessed mounting holes
• Mounting holes with ⌀4.5 mm
• Countersink with ⌀5.5 mm
• Hinge pin with ⌀3 mm
• Hinge roller with ⌀4.8 mm outer diameter
• Five joint segments
• Reference door for weight specification: 500 mm (19-11/16″) x 250 mm (9-27/32″)
• Suitable for different door and flap applications
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• The fastening is done with 4 x countersunk screws made of stainless steel V2A, approx. ⌀3.5 mm (not included)
• The flat hinge has 4 mounting holes with countersink
• The flat hinge is first aligned with the door or flap and frame in the desired position
• The 4 attachment points are marked according to the hole pattern and, depending on the material used, pre-drilled or threaded
• The hinge is then fastened with suitable countersunk screws
• For a visually clean installation, the screw heads should be as flush as possible in the countersinks
• Before the final tightening, it must be checked whether the door or flap can be moved freely and without bracing

Dimensions:

• Length: 38 mm (1-1/2″)
• Width: 26.5 mm (1-3/64″)
• Material thickness: 0.8 mm (1/32″)
• Pinhole size: 27 mm (1-1/16″)
• Number of joint segments: 3

For more dimensions and details , see technical drawing.

Material:

• The flat hinges B-1059-5 are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2pcs flat hinge B-1059-5 (10661) made of solid stainless steel SUS304, glossy polished, 38 mm (1-1/2″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10661
• Item number: B-1059-5

Manufacturer: TAKIGEN (Japan)

Application:

Robust flat hinge for machine doors, maintenance hatches and much more.

The B-1059-4 (10660) screw-on hinge connects doors or hatches to a body or frame, allowing for easy, permanent rotational movement.

The flat design is particularly suitable for screw-on applications on housings, machine covers and cabinets.

SUS304 stainless steel offers good corrosion resistance, making the hinge suitable for humid or more demanding environments.

The polished surface ensures a clean, high-quality look and makes cleaning easier.

4 countersunk holes enable stable fastening, whereby the screw heads can be largely flush with the hinge blades.

When using two hinges vertically, the reference door weight is up to 6.7 kg (15 lbs) for a door size of 600 mm (23-5/8″) x 300 mm (11-13/16″).

The high-quality flat hinges B-1059-4 are perfect for, among other things:

• Enclosure doors
• Machine covers
• Stainless steel housing
• Control cabinets
• Device flaps
• Cabinet doors
• Machine doors
• Maintenance hatches

Technical details:

• Weight: 15 g (for 2 pieces: 30 g)
• Load capacity (load capacity): 6.7 kg (15 lbs) – for 2 pieces
• Size: 51 mm (2-1/64″)
• Available in 5 sizes: 38 mm, 51 mm, 64 mm, 76 mm and 89 mm
• Easy installation, stable
• Material thickness 0.8 mm (1/32″)
• 4 recessed mounting holes
• Mounting holes with ⌀4.5 mm
• Countersink with ⌀5.5 mm
• Hinge pin with ⌀3 mm
• Hinge roller with ⌀4.8 mm outer diameter
• Five joint segments
• Reference door for weight specification: 600 mm (23-5/8″) x 300 mm (11-13/16″)
• Suitable for different door and flap applications
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• The fastening is done with 4 x countersunk screws made of stainless steel V2A, approx. ⌀3.5 mm (not included)
• The flat hinge has 4 mounting holes with countersink
• The flat hinge is first aligned with the door or flap and frame in the desired position
• The 4 attachment points are marked according to the hole pattern and, depending on the material used, pre-drilled or threaded
• The hinge is then fastened with suitable countersunk screws
• For a visually clean installation, the screw heads should be as flush as possible in the countersinks
• Before the final tightening, it must be checked whether the door or flap can be moved freely and without bracing

Dimensions:

• Length: 51 mm (2-1/64″)
• Width: 34.5 mm (1-23/64″)
• Material thickness: 0.8 mm (1/32″)
• Hole Pattern: 36 mm (1-27/64″)
• Number of joint segments: 5

For more dimensions and details , see technical drawing.

Material:

• The flat hinges B-1059-4 are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2pcs flat hinge B-1059-4 (10660) made of solid stainless steel SUS304, glossy polished, 51 mm (2-1/64″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10660
• Item number: B-1059-4

Manufacturer: TAKIGEN (Japan)

Application:

Robust flat hinge for machine doors, maintenance hatches and much more.

The B-1059-3 (10659) screw-on hinge connects doors or flaps to a body or frame and allows for easy, permanent rotational movement.

The flat design is particularly suitable for screw-on applications on housings, machine covers and cabinets.

SUS304 stainless steel offers good corrosion resistance, making the hinge suitable for humid or more demanding environments.

The polished surface ensures a clean, high-quality look and makes cleaning easier.

6 countersunk holes enable stable fastening, whereby the screw heads can be largely flush with the hinge blades.

When using two hinges vertically, the reference door weight is up to 9.7 kg (21 lbs) for a door size of 700 mm (27-9/16″) x 350 mm (13-25/32″).

The high-quality flat hinges B-1059-3 are perfect for, among other things:

• Enclosure doors
• Machine covers
• Stainless steel housing
• Control cabinets
• Device flaps
• Cabinet doors
• Machine doors
• Maintenance hatches

Technical details:

• Weight: 21 g (for 2 pieces: 42 g)
• Load capacity (load capacity): 9.7 kg (21 lbs) – for 2 pieces
• Size: 64 mm (2-33/64″)
• Available in 5 sizes: 38 mm, 51 mm, 64 mm, 76 mm and 89 mm
• Easy installation, stable
• Material thickness 0.8 mm (1/32″)
• 6 recessed mounting holes
• Mounting holes with ⌀4.5 mm
• Countersink with ⌀6 mm
• ⌀4.5 mm hinge pin
• Hinge roller with ⌀6 mm outer diameter
• Five joint segments
• Reference door for weight specification: 700 mm (27-9/16″) x 350 mm (13-25/32″)
• Suitable for different door and flap applications
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• The fastening is done with 6 x countersunk screws made of stainless steel V2A, approx. ⌀3.5 mm (not included)
• The flat hinge has 6 mounting holes with countersink
• The flat hinge is first aligned with the door or flap and frame in the desired position
• The 6 attachment points are marked according to the hole pattern and, depending on the material used, pre-drilled or threaded
• The hinge is then fastened with suitable countersunk screws
• For a visually clean installation, the screw heads should be as flush as possible in the countersinks
• Before the final tightening, it must be checked whether the door or flap can be moved freely and without bracing

Dimensions:

• Length: 64 mm (2-33/64″)
• Width: 40 mm (1-37/64″)
• Material thickness: 0.8 mm (1/32″)
• Pinhole Pattern: 48 mm (1-57/64″)
• Number of joint segments: 5

For more dimensions and details , see technical drawing.

Material:

• The flat hinges B-1059-3 are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2 pieces flat hinge B-1059-3 (10659) made of solid stainless steel SUS304, glossy polished, 64 mm (2-33/64″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10659
• Item number: B-1059-3

Manufacturer: TAKIGEN (Japan)

Application:

Robust flat hinge for machine doors, housing doors, maintenance hatches and much more.

The B-1059-2 (10658) screw-on hinge connects doors or flaps to a body or frame and allows for easy, permanent rotational movement.

The flat design is particularly suitable for screw-on applications on housings, machine covers and cabinets.

SUS304 stainless steel offers good corrosion resistance, making the hinge suitable for humid or more demanding environments.

The polished surface ensures a clean, high-quality look and makes cleaning easier.

6 countersunk holes enable stable fastening, whereby the screw heads can be largely flush with the hinge blades.

When using two hinges vertically, the reference door weight is up to 10 kg (22 lbs) for a door size of 800 mm (31-1/2″) x 400 mm (15-3/4″).

The high-quality flat hinges B-1059-2 are perfect for, among other things:

• Machine covers
• Stainless steel housing
• Control cabinets
• Device flaps
• Cabinet doors
• Machine doors
• Enclosure doors
• Maintenance hatches

Technical details:

• Weight: 40 g (for 2 pieces: 80 g)
• Load capacity (load capacity): 10 kg (22 lbs) – for 2 pieces
• Size: 76 mm (2-63/64″)
• Available in 5 sizes: 38 mm, 51 mm, 64 mm, 76 mm and 89 mm
• Easy installation, stable
• Material thickness 1 mm (3/64″)
• 6 recessed mounting holes
• Mounting holes with ⌀4.5 mm
• Countersink with ⌀6 mm
• ⌀4.5 mm hinge pin
• Hinge roller with ⌀6 mm outer diameter
• Five joint segments
• Reference door for weight specification: 800 mm (31-1/2″) x 400 mm (15-3/4″)
• Suitable for different door and flap applications
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• The fastening is done with 6 x countersunk screws made of stainless steel V2A, approx. ⌀3.5 mm (not included)
• The flat hinge has 6 mounting holes with countersink
• The flat hinge is first aligned with the door or flap and frame in the desired position
• The 6 attachment points are marked according to the hole pattern and, depending on the material used, pre-drilled or threaded
• The hinge is then fastened with suitable countersunk screws
• For a visually clean installation, the screw heads should be as flush as possible in the countersinks
• Before the final tightening, it must be checked whether the door or flap can be moved freely and without bracing

Dimensions:

• Length: 76 mm (2-63/64″)
• Width: 45.5 mm (1-51/64″)
• Material thickness: 1 mm (3/64″)
• Hole Pattern: 56 mm (2-13/64″)
• Number of joint segments: 5

For more dimensions and details , see technical drawing.

Material:

• The flat hinges B-1059-2 are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2pcs flat hinge B-1059-2 (10658) made of solid stainless steel SUS304, glossy polished, 76 mm (2-63/64″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10658
• Item number: B-1059-2

Manufacturer: TAKIGEN (Japan)

Application:

Robust flat hinge for machine doors, housing doors, maintenance hatches and much more.

The B-1059-1 (10657) screw-on hinge connects doors or flaps to a body or frame and allows for easy, permanent rotational movement.

The flat design is particularly suitable for screw-on applications on housings, machine covers and cabinets.

SUS304 stainless steel offers good corrosion resistance, making the hinge suitable for humid or more demanding environments.

The polished surface ensures a clean, high-quality look and makes cleaning easier.

6 countersunk holes enable stable fastening, whereby the screw heads can be largely flush with the hinge blades.

When using two hinges vertically, the reference door weight is up to 13 kg for a door size of 1000 x 500 mm.

The high-quality flat hinges B-1059-1 are perfect for, among other things:

• Machine covers
• Stainless steel housing
• Control cabinets
• Device flaps
• Cabinet doors
• Machine doors
• Enclosure doors
• Maintenance hatches

Technical details:

• Weight: 70 g (for 2 pieces: 140 g)
• Load capacity (load capacity): 13 kg (29 lbs) – for 2 pieces
• Size: 89 mm (3-1/2″)
• Available in 5 sizes: 38 mm, 51 mm, 64 mm, 76 mm and 89 mm
• Easy installation, stable
• Material thickness 1.2 mm (3/64″)
• Six recessed mounting holes
• Mounting holes with ⌀5 mm
• Countersink with ⌀7 mm
• ⌀5 mm hinge pin
• Hinge roller with ⌀7.5 mm outer diameter
• Five joint segments
• Reference door for weight specification: 1000 mm (39-3/8″) x 500 mm (19-11/16″)
• Suitable for different door and flap applications
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• The fastening is done with 6 x countersunk screws made of stainless steel V2A, approx. ⌀3.5 mm (not included)
• The flat hinge has 6 mounting holes with countersink
• The flat hinge is first aligned with the door or flap and frame in the desired position
• The 6 attachment points are marked according to the hole pattern and, depending on the material used, pre-drilled or threaded
• The hinge is then fastened with suitable countersunk screws
• For a visually clean installation, the screw heads should be as flush as possible in the countersinks
• Before the final tightening, it must be checked whether the door or flap can be moved freely and without bracing

Dimensions:

• Length: 89 mm (3-1/2″)
• Width: 56 mm (2-13/64″)
• Material thickness: 1.2 mm (3/64″)
• Hole Pattern: 69 mm (2-23/32″)
• Number of joint segments: 5

For more dimensions and details , see technical drawing.

Material:

• The flat hinges B-1059-1 are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2pcs flat hinge B-1059-1 (10657) made of solid stainless steel SUS304, glossy polished, 89 mm (3-1/2″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10657
• Item number: B-1059-1

Manufacturer: TAKIGEN (Japan)