Application:

Robust spring hinge for equipment flaps, housing doors, covers and much more.

The TH-61SUS-1-0.8 spring hinge supports the automatic opening of flaps and lightweight doors through an integrated spring in the hinge pin.

The spring force acts in the direction of opening and thus supports the swinging up of moving components.

In the free position, the hinge is located at 90°, which makes it particularly suitable for equipment flaps, covers and enclosure doors.

Made entirely of SUS304, the construction offers high corrosion resistance and is also suitable for more demanding operating conditions and for long-lasting technical applications.

Four mounting holes allow for easy and secure screw mounting.

The compact dimensions of 32 mm (1-17/64″) x 25 mm (63/64″) allow the spring hinge to be integrated into device, housing and machine designs to save space.

The high-quality TH-61SUS-1-0.8 spring hinges are perfect for, among other things:

• Maintenance hatches
• Machine Enclosures
• Office Equipment
• Communication Devices
• Measuring instruments
• Device flaps
• Enclosure doors
• Covers

Technical details:

• Torque: 12.3 N·m
• Weight: 9.5 g (for 2 pieces: 19 g)
• Size: 32 mm (1-17/64″)
• Available in 4 torques: 1.9 N, 8.8 N, 12.3 N and 12.8 N
• Easy installation, stable
• Spring force in the opening direction
• Spring integrated into the hinge pin
• Free position at 90°
• 4 mounting holes
• ⌀3.2 mm (1/8″) mounting holes
• Material thickness: 1.2 mm (3/64″)
• Compact 32 mm (1-17/64″) x 25 mm (63/64″) design
• Reference spring force at position a: 0.8 N (80 gf)
• Reference spring force at position b: 1.4 N (140 gf)
• Reference spring force at position c: 1.9 N (190 gf)
• Suitable for lightweight doors and flaps
• Natural (unprocessed)
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality of TOCHIGIYA®

Surface:

• Natural (unprocessed)
• The material surface remains visible and is not covered by an additional coating

Assembly:

• The fastening is done with 4 x M3 pan head screws or flat round head screws, preferably made of stainless steel (not included)
• The TH-61SUS-1-0.8 spring strap has 4 mounting holes
• First, the mounting points must be marked according to the hole pattern of 20 mm (25/32″) x 14 mm (35/64″) and the necessary mounting holes must be prepared
• The spring hinge is then attached to the fixed surface with one hinge leaf and to the movable flap or door with the other hinge leaf
• The installation direction must be selected so that the spring force acts in the desired opening direction
• Four M3 pan head screws or screws with ⌀3 mm for wooden surfaces are suitable for fastening
• The screws are tightened evenly without deforming the hinge wings
• Finally, the flap must be moved several times and the desired opening effect of the spring hinge must be checked (for more details, see assembly drawing)

Dimensions:

• Overall width: 32 mm (1-17/64″)
• Overall Height: 25 mm (63/64″)
• Material thickness: 1.2 mm (3/64″)
• Horizontal hole spacing: 20 mm (25/32″)
• Top edge to bore center distance: 7/32″ (5.5 mm)
• Vertical hole spacing: 14 mm (35/64″)
• Mounting holes: 4 x ⌀3.2 mm (1/8″)
• Corner Radius: R1.5 mm (1/16″)
• Hinge pin: ⌀3 mm (1/8″)
• Free Standing: 90°

For more dimensions and details , see technical drawing.

Material:

• The TH-61SUS-1-0.8 spring hinges are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2 pieces spring hinge TH-61SUS-1-0.8 made of solid stainless steel SUS304, natural (unprocessed), 32 mm (1-17/64″)
• This item does not include mounting screws

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: TH-61SUS-1-0.8

Manufacturer: TOCHIGIYA (Japan)

Application:

Robust spring hinge for equipment flaps, housing doors, covers and much more.

The TH-61SUS-3 spring hinge supports the automatic opening of flaps and lightweight doors through an integrated spring in the hinge pin.

The spring force acts in the direction of opening and thus supports the swinging up of moving components.

In the free position, the hinge is located at 90°, which makes it particularly suitable for equipment flaps, covers and enclosure doors.

Made entirely of SUS304, the construction offers high corrosion resistance and is also suitable for more demanding operating conditions and for long-lasting technical applications.

Four mounting holes allow for easy and secure screw mounting.

The compact dimensions of 38 mm (1-1/2″) x 51 mm (2-1/64″) allow the spring hinge to be integrated into device, housing and machine designs to save space.

The high-quality TH-61SUS-3 spring hinges are perfect for, among other things:

• Maintenance hatches
• Machine Enclosures
• Office Equipment
• Communication Devices
• Measuring instruments
• Device flaps
• Enclosure doors
• Covers

Technical details:

• Torque: 12.3 N·m
• Weight: 19 g (for 2 pieces: 38 g)
• Size: 38 mm (1-1/2″)
• Available in 4 torques: 1.9 N, 8.8 N, 12.3 N and 12.8 N
• Easy installation, stable
• Spring force in the opening direction
• Spring integrated into the hinge pin
• Free position at 90°
• 4 mounting holes
• ⌀3.2 mm (1/8″) mounting holes
• Material thickness: 1.5 mm (1/16″)
• Compact 38 mm (1-1/2″) x 51 mm (2-1/64″) design
• Reference spring force at position a: 5.9 N (600 gf)
• Reference spring force at position b: 9.8 N (1000 gf)
• Reference spring force at position c: 12.8 N (1300 gf)
• Suitable for lightweight doors and flaps
• Natural (unprocessed)
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality of TOCHIGIYA®

Surface:

• Natural (unprocessed)
• The material surface remains visible and is not covered by an additional coating

Assembly:

• The fastening is done with 4 x M3 pan head screws or flat round head screws, preferably made of stainless steel (not included)
• The TH-61SUS-3 spring strap has 4 mounting holes
• First, the mounting points must be marked according to the hole pattern of 25 mm (63/64″) x 32 mm (1-17/64″) and the necessary mounting holes must be prepared
• The spring hinge is then attached to the fixed surface with one hinge leaf and to the movable flap or door with the other hinge leaf
• The installation direction must be selected so that the spring force acts in the desired opening direction
• Four M3 pan head screws or screws with ⌀3 mm for wooden surfaces are suitable for fastening
• The screws are tightened evenly without deforming the hinge wings
• Finally, the flap must be moved several times and the desired opening effect of the spring hinge must be checked (for more details, see assembly drawing)

Dimensions:

• Overall width: 38 mm (1-1/2″)
• Overall Height: 51 mm (2-1/64″)
• Material thickness: 1.5 mm (1/16″)
• Horizontal hole spacing: 25 mm (63/64″)
• Top edge to bore center distance: 3/8″ (9.5 mm)
• Vertical hole spacing: 32 mm (1-17/64″)
• Mounting holes: 4 x ⌀3.2 mm (1/8″)
• Corner Radius: R1.5 mm (1/16″)
• Hinge pin: ⌀3 mm (1/8″)
• Free Standing: 90°

For more dimensions and details , see technical drawing.

Material:

• The TH-61SUS-3 spring hinges are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2 pieces spring hinge TH-61SUS-3 made of solid stainless steel SUS304, natural (unprocessed), 38 mm (1-1/2″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: TH-61SUS-3

Manufacturer: TOCHIGIYA (Japan)

Application:

Robust spring hinge for equipment flaps, housing doors, covers and much more.

The TH-61SUS-2 spring hinge supports the automatic opening of flaps and lightweight doors through an integrated spring in the hinge pin.

The spring force acts in the direction of opening and thus supports the swinging up of moving components.

In the free position, the hinge is located at 90°, which makes it particularly suitable for equipment flaps, covers and enclosure doors.

Made entirely of SUS304, the construction offers high corrosion resistance and is also suitable for more demanding operating conditions.

Four mounting holes allow for easy and secure screw mounting.

The compact dimensions of 32 mm (1-17/64″) x 38 mm (1-1/2″) allow the spring hinge to be integrated into device, housing and machine designs to save space.

The high-quality TH-61SUS-2 spring hinges are perfect for, among other things:

• Maintenance hatches
• Machine Enclosures
• Office Equipment
• Communication Devices
• Measuring instruments
• Device flaps
• Enclosure doors
• Covers

Technical details:

• Torque: 12.3 N·m
• Weight: 19 g (for 2 pieces: 38 g)
• Size: 32 mm (1-17/64″)
• Available in 4 torques: 1.9 N, 8.8 N, 12.3 N and 12.8 N
• Easy installation, stable
• Spring force in the opening direction
• Spring integrated into the hinge pin
• Free position at 90°
• 4 mounting holes
• ⌀3.2 mm (1/8″) mounting holes
• Material thickness: 1.5 mm (1/16″)
• Compact 32 mm (1-17/64″) x 38 mm (1-1/2″) design
• Reference spring force at position a: 5.9 N (600 gf)
• Reference spring force at position b: 7.8 N (800 gf)
• Reference spring force at position c: 12.3 N (1250 gf)
• Suitable for lightweight doors and flaps
• Natural (unprocessed)
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality of TOCHIGIYA®

Surface:

• Natural (unprocessed)
• The material surface remains visible and is not covered by an additional coating

Assembly:

• The fastening is done with 4 x M3 pan head screws or flat round head screws, preferably made of stainless steel (not included)
• The TH-61SUS-2 spring strap has 4 mounting holes
• First, the mounting points must be marked according to the hole pattern of 20 mm (25/32″) x 26 mm (1-1/32″) and the necessary mounting holes must be prepared
• The spring hinge is then attached to the fixed surface with one hinge leaf and to the movable flap or door with the other hinge leaf
• The installation direction must be selected so that the spring force acts in the desired opening direction
• Four M3 pan head screws or screws with ⌀3 mm for wooden surfaces are suitable for fastening
• The screws are tightened evenly without deforming the hinge wings
• Finally, the flap must be moved several times and the desired opening effect of the spring hinge must be checked (for more details, see assembly drawing)

Dimensions:

• Overall width: 32 mm (1-17/64″)
• Overall Height: 38 mm (1-1/2″)
• Material thickness: 1.5 mm (1/16″)
• Horizontal hole spacing: 20 mm (25/32″)
• Top edge to bore center distance: 15/64″ (6 mm)
• Vertical hole spacing: 26 mm (1-1/32″)
• Mounting holes: 4 x ⌀3.2 mm (1/8″)
• Corner Radius: R1.5 mm (1/16″)
• Hinge pin: ⌀3 mm (1/8″)
• Free Standing: 90°

For more dimensions and details , see technical drawing.

Material:

• The TH-61SUS-2 spring hinges are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2 pieces spring hinge TH-61SUS-2 made of solid stainless steel SUS304, natural (unprocessed), 32 mm (1-17/64″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Item ID: TH-61SUS-2

Manufacturer: TOCHIGIYA (Japan)

Usage:

Industrial hinge made of brass for electrical appliances, systems, fixtures, housings and much more.

The industrial hinge B-51 has a built-in round limitation of the opening angle. This ensures that the flap or the door stops at approx. 95° when opened.

The B-51 flap hinges are suitable for flaps or doors up to 300 mm (11-13/16″) wide and up to 100 mm (3-15/16″) deep.

The weight of the door or flap must not exceed 3.6 kg.

The high-quality flap hinges B-51 have a unique design and are perfect for, among other things:

• Laboratory equipment
• Electrical appliances
• Grounds
• Devices
• Case

Technical details:

• Weight: 12 g
• Load capacity: 3.6 kg
• Size: 45 mm (1.8″)
• Beam angle: approx. 95°
• Elaborately processed
• Stable
• Robust
• Chrome-plated
• High brand quality from TAKIGEN®

Surface:

• Chrome-plated

Assembly:

• The industrial hinge B-51 is for screwing
• The flap hinge has four mounting holes with a diameter of ⌀2.8 mm (7/64″)
• The distance between the mounting holes is 21 mm (53/64″)

Dimensions:

• Flap hinge length: 45 mm (1-49/64″)
• Width: 30.5 mm (1-13/64″)
• Depth: 9 mm (23/64″)

For further dimensions and details
see technical drawing
.

Manufacture:

• The B-51 flap hinges are made of solid and sturdy brass

Included in delivery:

• 1 piece flap hinge B-51 made of solid and robust brass, chrome-plated

Manufacturer’s part numbers:

• Item identification number: 10148
• Item number: B-51

Manufacturer: TAKIGEN (Japan)