Lift hinge

2 pieces compact lifting hinge, made of steel, load capacity: 2 kg (5 lbs), 35 mm (1-3/8″), version: right, B-56-R. Robust push-in hinge for small doors, maintenance hatches, electronics housings and much more, by TAKIGEN (Japan)

Sun, 30 Aug 2026 19:43:30 +0000

2 pieces compact lifting hinge, made of robust steel, surface: galvanized, yellow, B-56-R (10150), height: 35 mm (1-3/8″), version: right, load capacity: 2 kg (5 lbs)

Application:

Robust plug-in hinge for small doors, maintenance hatches, electronics housings and much more.

Version: right. For right-hinged doors and flaps.

The compact B-56-R push-in hinge is used for the movable connection of small doors, flaps and housing parts.

Thanks to the two-part plug-in construction, the door can be lifted off the permanently mounted hinge part if necessary without having to unscrew the hinge.

The right-hand version allows targeted use with the appropriate design: right. For right-hinged doors and flaps. hinged doors and equipment flaps.

With a height of only 35 mm (1-3/8″), the hinge is particularly suitable for compact device housings, measuring instruments as well as electronic and technical equipment.

The cold-rolled steel sheet ensures a stable construction, while the galvanized and chromated surface protects the steel from corrosion.

When using two hinges mounted on top of each other, the B-56-R lift-out hinge is suitable for lightweight doors with a reference weight of 2 kg.

The high-quality B-56-R poster hinges are perfect for, among other things:

Device Enclosures
Audio Devices
Communication Devices
Measuring instruments
Small doors
Maintenance hatches
Housing

Technical details:

Version: right
Weight: 8 g (for 2 pieces: 16 g)
Load capacity (load capacity): 2 kg (5 lbs) – for 2 pieces
Height: 35 mm (1-3/8″)
Available in 2 versions: left (B-56-L) and right (B-56-R)
Easy installation, stable
Compact push-in hinge for small doors
Detachable two-piece construction
Door or flap can be removed without unscrewing the hinge
Material thickness: 0.8 mm (1/32″)
Surface treatment MFZn-C
4 mounting holes
⌀3 mm (1/8″) hinge pin
Suitable for measuring instruments and technical devices
RoHS10 compliant
Galvanized, yellow
steel, robust
High brand quality from TAKIGEN®

Surface:

Galvanized, yellow
The galvanized surface protects against rust and corrosion

Assembly:

The fastening is done with screws with approx. ⌀2.3 to 2.5 mm, preferably with a lens or round head (not included)
The B-56-R plug-in hinge is positioned on the door or flap and the associated frame or housing
Pay attention to the right-hand version so that the hinge is mounted to match a right-hinged door or equipment flap
First, the positions of the four mounting holes must be marked according to the hole pattern
Depending on the material used, suitable fastening holes or pre-drillings must then be drilled
The two hinge halves are attached to the movable and fixed component with suitable screws
The hinge axes of at least two hinges mounted on top of each other must align exactly
Then the moving part is attached to the hinge pin from above
To remove the door or flap, it is lifted and removed from the permanently mounted hinge part

Dimensions:

Total height of lifting hinge B-56-R: 35 mm (1-3/8″)
Overall width, unfolded: 24 mm (15/16″)
Material thickness: 0.8 mm (1/32″)
Vertical hole spacing: 19 mm (3/4″)
Horizontal hole spacing: 14 mm (35/64″)
Mounting holes: 4 x ⌀2.5 mm (3/32″)
Hinge pin: ⌀3 mm (1/8″)
Outer diameter of the hinge roller: approx. ⌀5 mm

Compact lifting hinge, B-56-R, height: 35 mm, by TAKIGEN, load capacity: 2 kg (5 lbs), version: right. Technical drawing

For more dimensions and details , see technical drawing.

Material:

The B-56-R flagship hinges are made of robust steel
Steel is ideal for furniture fittings and industrial fittings because it is both robust and durable, which ensures high resilience and long service life of the fittings

Included in delivery:

2 pieces B-56-R (10150) plug-in hinge made of robust steel, galvanized, yellow, 35 mm (1-3/8″), version: right
This item does not include mounting screws

Manufacturer’s part numbers:

Article ID: 10150
Item number: B-56-R

Manufacturer: TAKIGEN (Japan)

2 pieces compact lifting hinge, made of steel, load capacity: 2 kg (5 lbs), 35 mm (1-3/8″), version: left, B-56-L. Robust push-in hinge for small doors, maintenance hatches, electronics housings and much more, by TAKIGEN (Japan)

Sat, 29 Aug 2026 13:37:32 +0000

2 pieces compact lifting hinge, made of robust steel, surface: galvanized, yellow, B-56-L (10149), height: 35 mm (1-3/8″), version: left, load capacity: 2 kg (5 lbs)