Application:

Robust flat hinge for machine doors, housing doors, maintenance hatches and much more.

The B-1059-2 (10658) screw-on hinge connects doors or flaps to a body or frame and allows for easy, permanent rotational movement.

The flat design is particularly suitable for screw-on applications on housings, machine covers and cabinets.

SUS304 stainless steel offers good corrosion resistance, making the hinge suitable for humid or more demanding environments.

The polished surface ensures a clean, high-quality look and makes cleaning easier.

6 countersunk holes enable stable fastening, whereby the screw heads can be largely flush with the hinge blades.

When using two hinges vertically, the reference door weight is up to 10 kg (22 lbs) for a door size of 800 mm (31-1/2″) x 400 mm (15-3/4″).

The high-quality flat hinges B-1059-2 are perfect for, among other things:

• Machine covers
• Stainless steel housing
• Control cabinets
• Device flaps
• Cabinet doors
• Machine doors
• Enclosure doors
• Maintenance hatches

Technical details:

• Weight: 40 g (for 2 pieces: 80 g)
• Load capacity (load capacity): 10 kg (22 lbs) – for 2 pieces
• Size: 76 mm (2-63/64″)
• Available in 5 sizes: 38 mm, 51 mm, 64 mm, 76 mm and 89 mm
• Easy installation, stable
• Material thickness 1 mm (3/64″)
• 6 recessed mounting holes
• Mounting holes with ⌀4.5 mm
• Countersink with ⌀6 mm
• ⌀4.5 mm hinge pin
• Hinge roller with ⌀6 mm outer diameter
• Five joint segments
• Reference door for weight specification: 800 mm (31-1/2″) x 400 mm (15-3/4″)
• Suitable for different door and flap applications
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• The fastening is done with 6 x countersunk screws made of stainless steel V2A, approx. ⌀3.5 mm (not included)
• The flat hinge has 6 mounting holes with countersink
• The flat hinge is first aligned with the door or flap and frame in the desired position
• The 6 attachment points are marked according to the hole pattern and, depending on the material used, pre-drilled or threaded
• The hinge is then fastened with suitable countersunk screws
• For a visually clean installation, the screw heads should be as flush as possible in the countersinks
• Before the final tightening, it must be checked whether the door or flap can be moved freely and without bracing

Dimensions:

• Length: 76 mm (2-63/64″)
• Width: 45.5 mm (1-51/64″)
• Material thickness: 1 mm (3/64″)
• Hole Pattern: 56 mm (2-13/64″)
• Number of joint segments: 5

For more dimensions and details , see technical drawing.

Material:

• The flat hinges B-1059-2 are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2pcs flat hinge B-1059-2 (10658) made of solid stainless steel SUS304, glossy polished, 76 mm (2-63/64″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10658
• Item number: B-1059-2

Manufacturer: TAKIGEN (Japan)

Application:

Robust rope flap holder for furniture flaps, cabinet flaps, secretary flaps, bar flaps and much more.

The flap fitting 1010521 (Microwinch) is a compact flap holder for downward-opening furniture flaps and works with a heavy-duty steel cable.

When opened, the mechanism slows down the downward movement of the flap and thus prevents it from falling uncontrollably.

The end position of the open flap can be adjusted so that the opening path can be adapted to the furniture and use.

The 10 kg (22 lbs) braking force version is intended for flap heights from 210 to 480 mm (8-17/64″ – 18-57/64″); the allowable combination of flap height, flap weight and number of mechanisms is determined according to the selection table.

Since the cable flap holder can 1010521 be mounted either horizontally or vertically as well as on the right or left, it can also be used flexibly in flatter furniture frames.

The combination of steel and plastic ensures a compact, robust construction and makes the fitting particularly suitable for home, office and cabinet furniture.

The high-quality rope flap holders 1010521 are perfect for, among other things:

• Living room furniture
• Office furniture
• Wall cabinets
• Sideboards
• Furniture flaps
• Cabinet flaps
• Secretary flaps
• Bar flaps

Technical details:

• Weight: 295 g
• Load capacity: 10 kg (22 lbs)
• Size: 160.5 mm (6-5/16″)
• Available in 4 versions: 4 kg, 6 kg, 10 kg, 14 kg
• Easy installation, stable
• Damped downward movement of the furniture flap
• Adjustable opening end position
• With steel cable
• Can be used on the right and left
• Can be mounted horizontally and vertically
• For flap heights from 210 to 480 mm (8-17/64″ – 18-57/64″)
• For panel thicknesses from 16 to 22 mm (5/8″ – 55/64″)
• Compact design
• Suitable for flat furniture carcasses
• Use with furniture hinges
• One or two mechanisms depending on the weight of the flap and the height of the flap
• Grey
• robust
• High brand quality from UMAXO®

Surface:

• Grey
• Grey offers a versatile and elegant base that combines well with other colours and materials, creating a calm, timeless atmosphere in both modern and classic spaces
• In addition, grey has the ability to highlight accents in a room without being dominant itself, making it ideal for creating harmonious and balanced interiors

Assembly:

• Fastening is done using the six screws included in the scope of delivery (Euro screws)
• The rope flap holder 1010521 has 2 mounting holes with ⌀6.5 mm at a distance of 110 mm; the separate flap connection also has two attachment points
• First of all, the number of mechanisms matching the flap height and the flap weight must be determined on the basis of the selection table
• Then the attachment points on the carcase side are marked according to the desired horizontal or vertical installation position and pre-drilled for the mechanism with ⌀5 mm x 12 mm
• In the case of a wood-based or wood-based key, two holes of ⌀5 mm (13/64″) x 13 mm and the middle hole of ⌀10 mm x 11 mm are made for the flap connection
• The flap holder and the flap connection are then mounted with the provided fastening screws
• Then the steel cable is connected to the flap connection and checked for correct running. Finally, the end opening position is adjusted, whereby the flap is to be relieved during adjustment (for further details, see assembly drawing)

Dimensions:

• Length: 160.5 mm (6-5/16″)
• Maximum height: 68.5 mm (2-45/64″)
• Case height at the narrower end: 62.7 mm (2-15/32″)
• Depth: 26 mm (1-1/32″)
• Mounting hole spacing: 110 mm (4-21/64″)
• Mounting holes on mechanism: ⌀6.5 mm (1/4″)

For more dimensions and details , see technical drawing.

Material:

• The 1010521 Rope Flap Holders are made of metal and robust plastic (metal and plastic)
• Steel rope
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 set 1010521 cable flap holder made of metal and robust plastic, grey
• 6 pieces of Euro screws

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Item ID: 1010521
• GTIN number (EAN, UPC): 8432393100661

Manufacturer: EMUCA