Application:

Espagnolette lock for furniture, wardrobe, wardrobe and much more, set for a wardrobe door.

The S.RBL.922.165.RH.10 twist bar locks, also known as Espagnolette, are designed for easy and secure locking of cabinets and furniture.

S.RBL.922.165.RH.10 rod locks are used for particularly high doors. The bolt on the screw-on lock and the two locking hooks at the ends of the 1000 mm (39-3/8″) long rods ensure a secure hold.

When the key is turned, the turning rod rotates. The locking hooks enclose the locking bolts and thus provide a secure and firm closure of the furniture door.

The locking cam moves from the lock into the strike plate and, together with the two locking hooks, ensures that the door is closed in three places.

Solid and high-quality workmanship ensures a long and smooth operation of these twist rod locks.

The high-quality S.RBL.922.165.RH.10 torsion bar locks are suitable for:

• Furniture
• Cabinet
• Wardrobe
• Office cabinet
• School Furniture
• Doctor’s office furniture
• Hospital Furniture
• Shopfitting

Technical details:

• Size: 16.5 mm (0.7″)
• Lock: right-hand closing
• with two swivel bars: 1000 mm (39-3/8″)
• Lock: keyed alike (all keys match all locks)
• Complete set (without rotating bar) for a furniture door for cabinets and cabinets
• Quick and easy installation, for screwing
• for swivel bars profiles 6 mm
• for wooden doors with a thickness of 14 to 19 mm
• made of solid die-cast zinc (zamak)
• nickel-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Nickel-plated
• Inner wheel: black
• Mounting bracket: galvanized
• The nickel-plated surface protects against rust and corrosion

Assembly:

• To screw on
• To mount the twist rod lock, it is necessary to drill a hole with a diameter of 17 mm in the front of the furniture
• The cylinder (cylinder length 22 mm) is then inserted from the inside and the lock is screwed on
• Then the cover rosette is inserted from the outside (for further details see
  assembly drawing
  )

Dimensions:

• Lock cylinder diameter: Φ16.5 mm (21/32″)
• Twist Bar Lock Height: 74 mm (2-29/32″)
• Width: 30 mm (1-3/16″)
• Depth: 17/32″ (13.5 mm)
• Distance between mounting holes: 64 mm (2-33/64″)
• Lock cylinder length: 22 mm (55/64″)
• Swivel bar length: 1000 mm (39-3/8″)

For further dimensions and details
see technical drawing
.

Material:

• The torsion rod locks 14.05.268+2×14.05.720 are made of solid die-cast zinc
• The inner wheel of the twist rod locks is made of polypropylene (PP)
• The mounting bracket is made of steel

Included in delivery:

• 1 piece torsion rod lock 14.05.268+2×14.05.720 made of solid die-cast zinc, nickel-plated
• 2 pieces of swivel bar, 1000 mm (39-3/8″)

Additional information:

• Download the Reach Declaration for the Rotary Rods (14.05.720)
• Download the Reach Declaration for the Twist Bar Lock (14.05.268)

Manufacturer’s part numbers:

• Article number: 14.05.268, 14.05.720
• EAN number: 5704866454056, 5704866043960

Manufacturer: SISO Denmark

Application:

Master key J12 for SISO locks with J12 system and much more.

With the help of the master key 14.04.123-0, all locks with the J12 system from SISO can be opened.

The master key is necessary if the key matching the lock is damaged or can no longer be found.

It is recommended to provide several master keys per locking system and to store them safely.

The high-quality master keys 14.04.123-0 are perfect for, among other things:

• SISO locks with J12 system

Technical details:

• Weight: 4.5 g
• J12
• Easy installation, stable
• White
• robust
• High brand quality from UMAXO®

Surface:

• White
• White finishes convey a clean and modern aesthetic
• The colour white reflects light effectively, making rooms look brighter and visually larger
• In addition, white objects are inconspicuous and easy to clean, which makes them particularly practical for everyday use

Assembly:

• No special notes

Material:

• The master keys 14.04.123-0 are made of metal and robust plastic
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece master key 14.04.123-0 made of metal and robust plastic, white
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.04.123-0
• EAN number: 5704866040372

Manufacturer: SISO Denmark

Application:

Espagnolette lock for furniture, wardrobe, wardrobe and much more, set for a wardrobe door.

The S.RBL.922.165.RH.12 twist bar locks, also known as Espagnolette, are designed for easy and secure locking of cabinets and furniture.

S.RBL.922.165.RH.12 rod locks are used for particularly high doors. The bolt on the screw-on lock and the two locking hooks on the ends of the 1200 mm (47-1/4″) long rods ensure a secure hold.

When the key is turned, the turning rod rotates. The locking hooks enclose the locking bolts and thus provide a secure and firm closure of the furniture door.

The locking cam moves from the lock into the strike plate and, together with the two locking hooks, ensures that the door is closed in three places.

Solid and high-quality workmanship ensures a long and smooth operation of these twist rod locks.

The high-quality S.RBL.922.165.RH.12 rotary bar locks are suitable for:

• Furniture
• Cabinet
• Wardrobe
• Office cabinet
• School Furniture
• Doctor’s office furniture
• Hospital Furniture
• Shopfitting

Technical details:

• Weight: 704 g
• Size: 16.5 mm (0.7″)
• Lock: right-hand closing
• with two swivel bars: 1200 mm (47-1/4″)
• Lock: keyed alike (all keys match all locks)
• Complete set (without rotating bar) for a furniture door for cabinets and cabinets
• Quick and easy installation, for screwing
• for swivel bars profiles 6 mm
• for wooden doors with a thickness of 14 to 19 mm
• made of solid die-cast zinc (zamak)
• nickel-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Nickel-plated
• Inner wheel: black
• Mounting bracket: galvanized
• The nickel-plated surface protects against rust and corrosion

Assembly:

• To screw on
• To mount the twist rod lock, it is necessary to drill a hole with a diameter of 17 mm in the front of the furniture
• The cylinder (cylinder length 22 mm) is then inserted from the inside and the lock is screwed on
• Then the cover rosette is inserted from the outside (for further details see
  assembly drawing
  )

Dimensions:

• Lock cylinder diameter: Φ16.5 mm (21/32″)
• Twist Bar Lock Height: 74 mm (2-29/32″)
• Width: 30 mm (1-3/16″)
• Depth: 17/32″ (13.5 mm)
• Distance between mounting holes: 64 mm (2-33/64″)
• Lock cylinder length: 22 mm (55/64″)
• Swivel Bar Length: 1200 mm (47-1/4″)

For further dimensions and details
see technical drawing
.

Material:

• The twist rod locks 14.05.268+2×14.05.725 are made of solid die-cast zinc
• The inner wheel of the twist rod locks is made of polypropylene (PP)
• The mounting bracket is made of steel

Included in delivery:

• 1 piece of twist rod lock 14.05.268+2×14.05.725 made of solid die-cast zinc, nickel-plated
• 2 swivel bar, 1200 mm (47-1/4″)

Additional information:

• Download Reach Declaration for 14.05.268
• Download Reach Declaration for 14.05.725

Manufacturer’s part numbers:

• Article identification number: 14.05.268, 14.05.725
• EAN number: 5704866454056, 5704866484213

Manufacturer: SISO Denmark

Application:

Espagnolette lock for padlock, for furniture, cabinet, wardrobe, office cabinet and much more.

The RBL.924.KA twist bar locks, also known as espagnolettes, are designed for easy and secure locking of cabinets and furniture.

The RBL.924.KA rod locks are used for particularly high doors. The bolt on the screw-on lock and the two locking hooks at the ends of the rods ensure a secure hold.

When locked by turning the knob, the door is locked at three points.

The Espagnolette-Lock fits the wood thickness from 19 to 20 mm

When the key is turned, the turning rod rotates. The locking hooks enclose the locking bolts and thus provide a secure and firm closure of the furniture door.

The locking cam moves from the lock into the strike plate and, together with the two locking hooks, ensures that the door is closed in three places.

Solid and high-quality workmanship ensures a long and smooth operation of these twist rod locks.

The high-quality RBL.924.KA rotary bar locks are suitable for:

• School Furniture
• Doctor’s office furniture
• Hospital Furniture
• Shopfitting
• Furniture
• Cabinet
• Wardrobe
• Office cabinet

Technical details:

• Version: right
• Weight: 288 g
• Size: 16.5 mm (0.7″)
• Lock: right-hand closing
• Lock: keyed alike (all keys match all locks)
• Complete set (without rotating bar) for a furniture door for cabinets and cabinets
• Easy and quick assembly, for screwing
• For wooden doors with a thickness of 19 to 20 mm
• nickel-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Nickel-plated
• The nickel-plated surface protects against rust and corrosion

Assembly:

• To screw on
• To install the twist rod lock, a hole with a diameter of ⌀16.5 mm (21/32″) must be drilled in the front of the furniture
• The cylinder (cylinder length 22 mm) is then inserted from the inside and the lock is screwed on
• The latch handle is inserted into the lock using the mounting pin (included) and fastened (see
  assembly drawing
  for more details)

Dimensions:

• Lock cylinder diameter: Φ16.5 mm (21/32″)
• Twist Bar Lock Height: 74 mm (2-29/32″)
• Width: 30 mm (1-3/16″)
• Depth: 13.8 mm (35/64″)
• Distance between mounting holes: 64 mm (2-33/64″)
• Lock cylinder length: 16 mm (5/8″)

For further dimensions and details
see technical drawing
.

Material:

• The 14.05.234-0 torsion rod locks are made of solid die-cast zinc

Included in delivery:

• 1 piece torsion rod lock 14.05.234-0 made of solid die-cast zinc, nickel-plated
• 1 bolt handle, lockable
• 1 piece washer (gasket) made of plastic
• 2 pieces of keys
• 1 piece of pin for mounting the latch handle
• 2 pieces of asymmetrical locking bolts (top and bottom)
• 2 pieces of locking hooks (top and bottom)
• 2 rod guides
• The swivel rod must be ordered separately. Available in lengths of 1000, 1200, 1500 and 2000 mm and in nickel, bronze or brass

Additional information:

• Download assembly instructions
• Download Reach Declaration

Manufacturer’s part numbers:

• Article identification number: 14.05.234-0
• EAN Number: 5704866042734

Manufacturer: SISO Denmark

Application:

Solid inlet handle with self-locking lock for caravan, yacht, caravan, private jet, motorhome and much more.

The high-quality snap lock 14.03.091-0 is a furniture handle with a locking function and, when locked, ensures that the furniture doors, cupboard doors or drawers do not open unintentionally during the journey or flight.

The 14.03.091-0 inlet handle is suitable for door thicknesses from 12 mm (15/32″) to 14 mm (35/64″).

To open the furniture door, the lever in the housing of the recess handle 14.03.091-0 must be pulled forward with a finger and the snap lock must be released.

These features make the Snap Lock 14.03.091-0 perfect for ships, private planes, motorhomes and caravans.

The high-quality recessed handles 14.03.091-0 are perfect for, among other things:

• Boat
• Superyacht
• Camper Van
• Caravan
• Yacht
• Caravan
• Private Jet
• Camper

Technical details:

• Weight: 87 g
• Size: 59.5 mm (2-11/32″)
• Available in two surface colours: chrome and black
• Easy installation, practical, stable
• modern design
• High-quality optics
• Suitable for door thicknesses from 12 mm (15/32″) to 14 mm (35/64″)
• Suitable for interior (inlay) and surface-mounted (existing) furniture doors
• The recessed handles 14.03.091-0 look solid and high-quality
• black
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office

Assembly:

• Fastening is done using the four screws included in the scope of delivery
• For mounting, a cut-out with a width of 52 mm (2-3/64″) and a height of 34 mm (1-11/32″) must be made in the front
• The distance between the edge of the door and the cutout should be 24 mm (15/16″)
• The inlet handle 14.03.091-0 is inserted into the front and the housing is screwed on from the back using the screws supplied
• The strike plate is then attached to the carcass side using the screws supplied (for further details, see assembly drawing)

Dimensions:

• Inlet handle width: 59.5 mm (2-11/32″)
• Height: 36 mm (1-27/64″)
• Handle depth: 52 mm (2-3/64″)

For more dimensions and details, see technical drawing.

Material:

• The recessed handles 14.03.091-0 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
• In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

• 1 piece snap lock 14.03.091-0 made of solid die-cast zinc, black
• Four Piece Mounting Screw
• 1 piece lock made of ABS, colour: grey
• 1 piece counterpart made of ABS, colour: grey
• 1 piece lever made of zamak, color: black

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.03.091-0
• EAN number: 5704866518406

Manufacturer: SISO Denmark

Application:

Solid inlet handle with self-locking lock for caravan, yacht, caravan, private jet, motorhome and much more.

The high-quality snap lock 14.03.090-0 is a furniture handle with a locking function and, when locked, ensures that the furniture doors, cupboard doors or drawers do not open unintentionally during the journey or flight.

The 14.03.090-0 inlet handle is suitable for door thicknesses from 12 mm (15/32″) to 14 mm (35/64″).

To open the furniture door, the lever in the housing of the recess handle 14.03.090-0 must be pulled forward with one finger and the snap lock must be released.

These features make the Snap Lock 14.03.090-0 perfect for ships, private planes, motorhomes and caravans.

The high-quality recessed handles 14.03.090-0 are perfect for, among other things:

• Boat
• Superyacht
• Camper Van
• Caravan
• Yacht
• Caravan
• Private Jet
• Camper

Technical details:

• Weight: 87 g
• Size: 59.5 mm (2-11/32″)
• Available in two surface colours: chrome and black
• Easy installation, practical, stable
• modern design
• High-quality optics
• Suitable for door thicknesses from 12 mm (15/32″) to 14 mm (35/64″)
• Suitable for interior (inlay) and surface-mounted (existing) furniture doors
• The recessed handles 14.03.090-0 look solid and high-quality
• chrome-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Chrome-plated
• Chrome-plated surfaces give rooms an elegant and modern look that looks timeless
• They are extremely easy to maintain, as chrome is resistant to corrosion and scratches and thus remains durable
• In addition, chrome-plated surfaces reflect light, making rooms appear brighter and visually larger

Assembly:

• Fastening is done using the four screws included in the scope of delivery
• For mounting, a cut-out with a width of 52 mm (2-3/64″) and a height of 34 mm (1-11/32″) must be made in the front
• The distance between the edge of the door and the cutout should be 24 mm (15/16″)
• The inlet handle 14.03.090-0 is inserted into the front and the housing is screwed on from the back using the screws supplied
• The strike plate is then attached to the carcass side using the screws supplied (for further details, see assembly drawing)

Dimensions:

• Inlet handle width: 59.5 mm (2-11/32″)
• Height: 36 mm (1-27/64″)
• Handle depth: 52 mm (2-3/64″)

For more dimensions and details, see technical drawing.

Material:

• The recessed handles 14.03.090-0 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
• In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

• 1 piece snap lock 14.03.090-0 made of solid die-cast zinc, chrome-plated
• Four Piece Mounting Screw
• 1 piece lock made of ABS, colour: grey
• 1 piece counterpart made of ABS, colour: grey
• 1 piece lever made of zamak, color: chrome-plated

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.03.090-0
• EAN number: 5704866518390

Manufacturer: SISO Denmark

Application:

Solid handle lever lock with self-locking lock for yacht, caravan, private jet, caravan and much more.

The high-quality lever handle lock 14.03.080-0+14.03.080-5 is a furniture handle with a locking function and, when locked, ensures that the furniture doors, cabinet doors or drawers do not open unintentionally while driving or flying.

The handle lever lock 14.03.080-0+14.03.080-5 is suitable for door thicknesses between 13 mm (33/64″) and 19 mm (3/4″).

To open the furniture door, the lever under the handle of the handle lever lock 14.03.080-0+14.03.080-5 must be pressed upwards with one finger and the lever handle lock must be released.

The handle lever lock 14.03.080-0+14.03.080-5 serves as a practical handle with a depth of 25.6 mm (1-1/64″).

These features make the lever handle lock 14.03.080-0+14.03.080-5 perfect for ships, private planes, motorhomes and caravans.

The high-quality lever handle locks 14.03.080-0+14.03.080-5 are perfect for, among other things:

• Boat
• Camper
• Superyacht
• Camper Van
• Yacht
• Caravan
• Private Jet
• Caravan

Technical details:

• Weight: 162 g
• Size: 164.5 mm (6-15/32″)
• Available in three surface colours: chrome-plated, black and stainless steel look
• Easy installation, practical, stable
• Modern design
• High-quality optics
• Suitable for internal (enclosed) and surface-mounted (existing) furniture doors
• The lever handle locks 14.03.080-0+14.03.080-5 look solid and high-quality
• chrome-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Chrome-plated
• Chrome-plated surfaces give rooms an elegant and modern look that looks timeless
• They are extremely easy to maintain, as chrome is resistant to corrosion and scratches and thus remains durable
• In addition, chrome-plated surfaces reflect light, making rooms appear brighter and visually larger

Assembly:

• Fastening is done using the six screws included in the scope of delivery
• For mounting, two holes with a diameter of ⌀6.5 mm (1/4″) and one hole with a diameter of ⌀18 mm (45/64″) must be drilled in the front
• The handle lever lock 14.03.080-0+14.03.080-5 is inserted into the front and the housing is screwed on from the back using the supplied screw
• The strike plate is then attached to the carcass side using the screws supplied (for further details, see assembly drawing)

Dimensions:

• Handle Lever Lock Width: 6-15/32″ (164.5 mm)
• Height: 25 mm (63/64″)
• Handle depth: 25.6 mm (1-1/64″)

For more dimensions and details, see technical drawing.

Material:

• The lever handle locks 14.03.080-0+14.03.080-5 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
• In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

• 1 piece lever handle lock 14.03.080-0+14.03.080-5 made of solid die-cast zinc, chrome-plated
• Six pieces of fastening screw
• 1 piece lock made of ABS, colour: grey
• 1 piece counterpart made of ABS, colour: grey
• 1 piece lever made of zamak, color: chrome-plated

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.03.080-0 and 14.03.080-5
• EAN number: 5704866518253 and 5704866520546

Manufacturer: SISO Denmark

Application:

Solid handle closure with self-locking lock and soft-close for yacht, caravan, private jet and much more.

The high-quality push-button handle 14.03.072-0 is a furniture handle with a locking function and, when recessed, ensures that the furniture doors or cabinet doors do not open unintentionally during the journey or flight.

The handle lock 14.03.072-0 is suitable for door thicknesses between 14 mm (35/64″) and 16 mm (5/8″).

To open the furniture door, the button of the push button handle 14.03.072-0 must be pressed and the push button handle must be released.

The handle lock 14.03.072-0 serves as a practical handle with a depth of 26 mm (1-1/32″).

The special feature of the push button handle 14.03.072-0 is that the counterpart (strike plate) has two spring-loaded buffers. When closing, these buffers ensure that the door closes smoothly and does not make any noise while driving or flying.

These features make the Push Button Handle 14.03.072-0 perfect for ships, private planes, motorhomes and caravans.

The high-quality snap fastener handles 14.03.072-0 are perfect for, among other things:

• Caravan
• Boat
• Camper
• Superyacht
• Camper Van
• Yacht
• Caravan
• Private Jet

Technical details:

• Weight: 173 g
• Size: 162 mm (6-3/8″)
• Available in three surface colours: chrome-plated, black and stainless steel look
• Easy installation, practical, stable
• Modern design
• High-quality optics
• Suitable for internal (enclosed) and surface-mounted (existing) furniture doors
• The snap fastener handles 14.03.072-0 look solid and high-quality
• Stainless steel look
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Stainless steel look
• Stainless steel look offers a modern and timeless look that blends harmoniously into different furnishing styles
• The surface is resistant to fingerprints and scratches, which ensures long-lasting and easy-to-clean use
• In addition, the elegant metallic sheen gives a high-quality and noble appearance

Assembly:

• Fastening is done using the seven screws included in the scope of delivery
• For mounting, two holes with a diameter of ⌀5 mm (13/64″) and one hole with a diameter of ⌀12 mm (15/32″) must be drilled in the front
• The handle lock 14.03.072-0 is inserted into the front and the housing is screwed on from the back using the supplied screw
• The strike plate is then attached to the carcass side using the screws supplied (for further details, see assembly drawing)

Dimensions:

• Snap handle width: 162 mm (6-3/8″)
• Height: 17 mm (43/64″)
• Handle depth: 26 mm (1-1/32″)

For more dimensions and details, see technical drawing.

Material:

• The push button handles 14.03.072-0 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
• In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

• 1 piece push-button handle 14.03.072-0 made of solid die-cast zinc, stainless steel look
• Seven pieces of fastening screw
• 1 piece lock made of ABS, colour: grey
• 1 piece counterpart made of ABS with spring-loaded buffers, colour: grey
• 1 piece ABS latch, colour: grey

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.03.072-0
• EAN number: 5704866513012

Manufacturer: SISO Denmark

Application:

Solid handle closure with self-locking lock and soft-close for yacht, caravan, private jet and much more.

The high-quality push-button handle 14.03.071-0 is a furniture handle with a locking function and, when recessed, ensures that the furniture doors or cabinet doors do not open unintentionally during the journey or during the flight.

The handle lock 14.03.071-0 is suitable for door thicknesses between 14 mm (35/64″) and 16 mm (5/8″).

To open the furniture door, the button of the push button handle 14.03.071-0 must be pressed and the push button handle must be released.

The handle lock 14.03.071-0 serves as a practical handle with a depth of 26 mm (1-1/32″).

The special feature of the push-button handle 14.03.071-0 is that the counterpart (strike plate) has two spring-loaded buffers. When closing, these buffers ensure that the door closes smoothly and does not make any noise while driving or flying.

These features make the Push Button Handle 14.03.071-0 perfect for ships, private planes, motorhomes and caravans.

The high-quality snap fastener handles 14.03.071-0 are perfect for, among other things:

• Caravan
• Boat
• Camper
• Superyacht
• Camper Van
• Yacht
• Caravan
• Private Jet

Technical details:

• Weight: 173 g
• Size: 162 mm (6-3/8″)
• Available in three surface colours: chrome-plated, black and stainless steel look
• Easy installation, practical, stable
• Modern design
• High-quality optics
• Suitable for internal (enclosed) and surface-mounted (existing) furniture doors
• The snap fastener handles 14.03.071-0 look solid and high-quality
• black
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office

Assembly:

• Fastening is done using the seven screws included in the scope of delivery
• For mounting, two holes with a diameter of ⌀5 mm (13/64″) and one hole with a diameter of ⌀12 mm (15/32″) must be drilled in the front
• The handle lock 14.03.071-0 is inserted into the front and the housing is screwed on from the back using the supplied screw
• The strike plate is then attached to the carcass side using the screws supplied (for further details, see assembly drawing)

Dimensions:

• Snap handle width: 162 mm (6-3/8″)
• Height: 17 mm (43/64″)
• Handle depth: 26 mm (1-1/32″)

For more dimensions and details, see technical drawing.

Material:

• The push button handles 14.03.071-0 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
• In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

• 1 piece push-button handle 14.03.071-0 made of solid die-cast zinc, black
• Seven pieces of fastening screw
• 1 piece lock made of ABS, colour: grey
• 1 piece counterpart made of ABS with spring-loaded buffers, colour: grey
• 1 piece ABS latch, colour: grey

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.03.071-0
• EAN number: 5704866513005

Manufacturer: SISO Denmark

Application:

Solid handle closure with self-locking lock and soft-close for yacht, caravan, private jet and much more.

The high-quality push-button handle 14.03.070-0 is a furniture handle with a locking function and, when recessed, ensures that the furniture doors or cabinet doors do not open unintentionally during the journey or flight.

The handle lock 14.03.070-0 is suitable for door thicknesses between 14 mm (35/64″) and 16 mm (5/8″).

To open the furniture door, the button of the push button handle 14.03.070-0 must be pressed and the push button handle must be released.

The handle lock 14.03.070-0 serves as a practical handle with a depth of 26 mm (1-1/32″).

The special feature of the push button handle 14.03.070-0 is that the counterpart (strike plate) has two spring-loaded buffers. When closing, these buffers ensure that the door closes smoothly and does not make any noise while driving or flying.

These features make the 14.03.070-0 push button handle perfect for ships, private planes, motorhomes and caravans.

The high-quality snap fastener handles 14.03.070-0 are perfect for, among other things:

• Caravan
• Boat
• Camper
• Superyacht
• Camper Van
• Yacht
• Caravan
• Private Jet

Technical details:

• Weight: 173 g
• Size: 162 mm (6-3/8″)
• Available in three surface colours: chrome-plated, black and stainless steel look
• Easy installation, practical, stable
• Modern design
• High-quality optics
• Suitable for internal (enclosed) and surface-mounted (existing) furniture doors
• The snap fastener handles 14.03.070-0 look solid and high-quality
• chrome-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Chrome-plated
• Chrome-plated surfaces give rooms an elegant and modern look that looks timeless
• They are extremely easy to maintain, as chrome is resistant to corrosion and scratches and thus remains durable
• In addition, chrome-plated surfaces reflect light, making rooms appear brighter and visually larger

Assembly:

• Fastening is done using the seven screws included in the scope of delivery
• For mounting, two holes with a diameter of ⌀5 mm (13/64″) and one hole with a diameter of ⌀12 mm (15/32″) must be drilled in the front
• The handle lock 14.03.070-0 is inserted into the front and the housing is screwed on from the back using the supplied screw
• The strike plate is then attached to the carcass side using the screws supplied (for further details, see assembly drawing)

Dimensions:

• Snap handle width: 162 mm (6-3/8″)
• Height: 17 mm (43/64″)
• Handle depth: 26 mm (1-1/32″)

For more dimensions and details, see technical drawing.

Material:

• The push button handles 14.03.070-0 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
• In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

• 1 piece push-button handle 14.03.070-0 made of solid die-cast zinc, chrome-plated
• Seven pieces of fastening screw
• 1 piece lock made of ABS, colour: grey
• 1 piece counterpart made of ABS with spring-loaded buffers, colour: grey
• 1 piece ABS latch, colour: grey

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.03.070-0
• EAN number: 5704866512992

Manufacturer: SISO Denmark