Application:

T-handle made of zamak for control cabinet, locker, vehicle and much more.

The T-handle 14.08.055-1 is suitable for locking metal cabinets, equipment, machines, special vehicles, enclosures and containers.

To close the cabinet handle 14.08.055-1, the handle must be rotated 90 degrees, and then the key must be turned 180 degrees.

If necessary, the T-handle 14.08.055-1 can also be blocked with the key in the open position, e.g. to prevent the door from being unintentionally locked.

The T-handle has a fixed pin cylinder.

No need to lock: the key can be removed in the open and closed position.

The high-quality 14.08.055-1 control cabinet locks have a simple and robust design and are perfect for:

• Locker
• Metal cabinet
• Sheet metal housing
• Cabinet door
• Ash pan
• Container
• Camper
• Switchboard
• Locker
• Vehicle

Technical details:

• Design: different-closing
• Weight: 233 g
• Size: 79 mm (3.2″)
• high-quality
• square: 8 x 8 mm (5/16″)
• without compulsory closing
• Mounting Type: Internal Mounting
• Reversible key (key fits into the lock on both sides)
• Drill hole spacing: 36 mm (1-27/64″)
• with permanently mounted pin cylinder
• Cylindrical Shape: Round Cylinder
• Closing movement: 90 degrees
• 400 different key variants
• Chrome-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Chrome-plated

Assembly:

• The fastening is done with the help of the screws included in the scope of delivery
• The T-handle 14.08.055-1 is for screwing
• The mounting plate of the control cabinet lock 14.08.055-1 has two mounting holes with the drill hole spacing: 36 mm (1-27/64″)

Dimensions:

• Cabinet lock length: 79 mm (3-7/64″)
• Mounting plate length: 58 mm (2-9/32″)
• Mounting plate width: 24 mm (15/16″)
• Drill hole spacing: 36 mm (1-27/64″)
• Square dimensions: 8 x 8 mm (5/16″)
• Lug length: 54 mm (2-1/8″)

For more dimensions and details, see technical drawing.

Manufacture:

Material:

• The 14.08.055-1 control cabinet locks are made of solid die-cast zinc

Included in delivery:

• 1 control cabinet handle 14.08.055-1 made of solid die-cast zinc, chrome-plated, with permanently mounted locking cylinder
• Two-piece fastening screw
• Two Piece Keys (Reversible Keys)
• 1 piece of locking tongue
• 1 piece of fastening bracket for the closing tongue
• 1 piece of fastening screw for the locking tongue
• Two Pieces Serrated Washer

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article identification number: 14.08.055-1
• EAN Number: 5704866044912

Manufacturer: SISO Denmark

Application:

Locker lock for locker, locker, school locker, locker and much more.

The coin deposit locks 14.60.250-0 (14.60.250) are deposit locks with coin slot. As an alternative to the coin, a coin chip can be used (included).

With the deposit locks 14.60.250-0 (14.60.250) you can significantly reduce the risk of losing keys. In addition, users can immediately see whether the locker is free or already occupied.

After inserting the coin or coin chip, the door can be locked and the key removed. Unmatched coins are automatically denied by the internal security system.

The locker lock 14.60.250-0 (14.60.250) is equipped with a small coin return compartment. Once the lock with the key has been opened, the coin falls into the coin return compartment and the user can remove it.

The key always remains in the lock after use and is ready for the next user.

The coin lock 14.60.250-0 (14.60.250) is the proven self-service system for secure cloakroom and valuables storage, e.g. in swimming pools, libraries, fitness centres, etc…

The locker lock 14.60.250-0 (14.60.250) can be used for lockers, lockers, school lockers, cabinets, etc.

The coin deposit lock 14.60.250-0 (14.60.250) can be installed in most common cabinet types.

The coin deposit locks are also perfect for retrofitting existing cabinet systems.

The high-quality 14.60.250-0 (14.60.250) coin locks have a simple and robust design and are perfect for, among other things:

• Locker cabinet
• Clothes locker
• Beach hotel
• Locker
• Locker
• School locker
• Locker

Technical details:

• Design: right-hand closing
• Weight: 346 g
• Size: 110 mm (4.4″)
• suitable for EUR 1.- coins
• Lock cylinder diameter: 22 mm (55/64″)
• right-hand closing (the furniture hinge is on the left)
• stable
• Includes coin chip for operation without change
• dark gray
• Round rosette included to cover the cylinder bore
• robust
• high brand quality from UMAXO®

Surface:

• Dark gray
• Coin Return Tray: Blue
• Rosette: Chrome-plated

Assembly:

• The 14.60.250-0 (14.60.250) coin locks have four mounting holes with a diameter of ⌀6.2 mm (1/4″)
• The distance between the mounting holes is 92 mm (3-5/8″) and 93 mm (3-21/32″)
• For the locking cylinder, a hole with a diameter of ⌀23 mm must be drilled in the furniture door
• The distance between the edge of the door and the hole for the locking cylinder is 29.7 mm (1-11/64″) (for more details, see
  assembly drawing
  )

Dimensions:

• Width of the deposit lock: 110 mm (4-21/64″)
• Height: 125 mm (4-59/64″)
• Lock Cylinder Diameter: ⌀22 mm (55/64″)

For more dimensions and details
, see technical drawing.

Material:

• The coin deposit locks 14.60.250-0 (14.60.250) are made of metal and robust plastic
• Lock: Metal
• Key: Brass
• Key Handle: Plastic
• Housing: Plastic
• Coin Return Compartment: Plastic
• Rosette: Metal

Included in delivery:

• One piece of coin deposit lock 14.60.250-0 (14.60.250) made of metal and robust plastic, dark grey
• Two Pieces of Deposit Key
• A piece of coin chip
• One piece of small coin return compartment
• A piece of rosette (round cover) for the lock cylinder
• A piece of sticker with the note “1 EUR”
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.60.250-0(14.60.250)
• EAN number: 5704866051835

Manufacturer: SISO Denmark

Application:

Locker lock for locker, locker, school locker, locker and much more.

The coin deposit locks 14.60.249-1 (14.60.249) are deposit locks with coin slot.

As an alternative to the coin, a coin chip can be used (included).

With the deposit locks 14.60.249-1 (14.60.249) you can significantly reduce the risk of losing keys. In addition, users can immediately see whether the locker is free or already occupied.

After inserting the coin or coin chip, the door can be locked and the key removed.

Unmatched coins are automatically denied by the internal security system.

The locker lock 14.60.249-1 (14.60.249) is equipped with a small coin return compartment.

Once the lock with the key has been opened, the coin falls into the coin return compartment and the user can remove it.

The key always remains in the lock after use and is ready for the next user.

The coin lock 14.60.249-1 (14.60.249) is the proven self-service system for secure cloakroom and valuables storage, e.g. in swimming pools, libraries, fitness centres, etc…

The locker lock 14.60.249-1 (14.60.249) can be used for lockers, lockers, school lockers, cabinets, etc.

The coin deposit lock 14.60.249-1 (14.60.249) can be installed in most common cabinet types.

The coin deposit locks are also perfect for retrofitting existing cabinet systems.

The high-quality 14.60.249-1 (14.60.249) coin locks have a simple and robust design and are perfect for, among other things:

• Locker cabinet
• Clothes locker
• Beach hotel
• Locker
• Locker
• School locker
• Locker

Technical details:

• Design: left-hand closing
• Weight: 346 g
• Size: 110 mm (4-21/64″)
• suitable for EUR 1.- coins
• Lock cylinder diameter: 22 mm (55/64″)
• left-closing (the furniture hinge is right)
• stable
• dark gray
• robust
• high brand quality from UMAXO®

Surface:

• Dark gray
• Coin Return Tray: Blue
• Rosette: Chrome-plated

Assembly:

• The coin locks 14.60.249-1 (14.60.249) have 4 mounting holes with a diameter of ⌀6.2 mm (1/4″) mm
• The distance between the mounting holes is 92 mm (3-5/8″) and 93 mm (3-21/32″)
• For the locking cylinder, a hole with a diameter of ⌀23 mm must be drilled in the furniture door
• The distance between the edge of the door and the hole for the locking cylinder is 29.7 mm (1-11/64″) (for more details, see
  assembly drawing
  )

Dimensions:

• Width of the deposit lock: 110 mm (4-21/64″)
• Height: 125 mm (4-59/64″)
• Lock Cylinder Diameter: ⌀22 mm (55/64″)

For more dimensions and details
, see technical drawing.

Material:

• The coin deposit locks 14.60.249-1 (14.60.249) are made of metal and robust plastic
• Lock: Metal
• Key: Brass
• Key Handle: Plastic
• Housing: Plastic
• Coin Return Compartment: Plastic
• Rosette: Metal

Included in delivery:

• 1 piece coin deposit lock 14.60.249-1 (14.60.249) made of metal and robust plastic, dark grey
• 2 pcs deposit keys
• 1 piece coin chip
• 1 piece small coin return compartment
• 1 piece rosette (round cover) for the lock cylinder
• 1 piece sticker with the note “1 EUR”
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.60.249-1 (14.60.249)
• EAN number: 5704866051811

Manufacturer: SISO Denmark

Application:

Locker lock for locker, locker, school locker, locker and much more.

The coin deposit locks 14.60.250-C are deposit locks with coin slot. As an alternative to the coin, a coin chip can be used (included).

With the 14.60.250-C deposit locks, you can significantly reduce the risk of losing keys. In addition, users can immediately see whether the locker is free or already occupied.

After inserting the coin or coin chip, the door can be locked and the key removed. Unmatched coins are automatically denied by the internal security system.

The locker lock 14.60.250-C is equipped with a small coin return compartment. Once the lock with the key has been opened, the coin falls into the coin return compartment and the user can remove it.

The key always remains in the lock after use and is ready for the next user.

The 14.60.250-C coin lock is the proven self-service system for secure cloakroom and valuables storage, e.g. in swimming pools, libraries, fitness centres, etc…

The locker lock 14.60.250-C can be used for lockers, lockers, school lockers, cabinets, etc.

The 14.60.250-C coin lock can be installed in most common cabinet types.

The coin deposit locks are also perfect for retrofitting existing cabinet systems.

The high-quality 14.60.250-C coin locks have a simple and robust design and are perfect for, among other things:

• Locker cabinet
• Clothes locker
• Beach hotel
• Locker
• Locker
• School locker
• Locker

Technical details:

• Design: right-hand closing
• Weight: 346 g
• Size: 110 mm (4-21/64″)
• suitable for CHF 1.- coins
• Lock cylinder diameter: 22 mm (55/64″)
• right-hand closing (the furniture hinge is on the left)
• Coin return is automatic after unlocking
• Alternatively usable with enclosed coin chip
• stable
• dark gray
• robust
• high brand quality from UMAXO®

Surface:

• Dark gray
• Coin Return Tray: Blue
• Rosette: Chrome-plated

Assembly:

• The 14.60.250-C coin locks have four mounting holes with a diameter of ⌀6.2 mm (1/4″) mm
• The distance between the mounting holes is 92 mm (3-5/8″) and 93 mm (3-21/32″)
• For the locking cylinder, a hole with a diameter of ⌀23 mm (29/32″) must be drilled in the furniture door
• The distance between the edge of the door and the hole for the locking cylinder is 29.7 mm (1-11/64″) (for more details, see
  assembly drawing
  )

Dimensions:

• Width of the deposit lock: 110 mm (4-21/64″)
• Height: 125 mm (4-59/64″)
• Lock Cylinder Diameter: ⌀22 mm (55/64″)

For more dimensions and details, see technical drawing.

Material:

• The 14.60.250-C coin locks are made of metal and robust plastic
• Lock: Metal
• Key: Brass
• Key Handle: Plastic
• Housing: Plastic
• Coin Return Compartment: Plastic
• Rosette: Metal

Included in delivery:

• 1 piece coin deposit lock 14.60.250-C made of metal and robust plastic, dark grey
• 2 pcs deposit keys
• 1 piece coin chip
• 1 piece small coin return compartment
• 1 piece rosette (round cover) for the lock cylinder
• 1 piece sticker with the note “1 CHF”
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.60.250-C
• EAN number: 5704866503907

Manufacturer: SISO Denmark

Application:

Locker lock for locker, locker, school locker, locker and much more.

The coin deposit locks 14.60.249-C are deposit locks with coin slot. As an alternative to the coin, a coin chip can be used (included).

With the 14.60.249-C deposit locks, you can significantly reduce the risk of losing keys. In addition, users can immediately see whether the locker is free or already occupied.

After inserting the coin or coin chip, the door can be locked and the key removed. Unmatched coins are automatically denied by the internal security system.

The locker lock 14.60.249-C is equipped with a small coin return compartment. Once the lock with the key has been opened, the coin falls into the coin return compartment and the user can remove it.

The key always remains in the lock after use and is ready for the next user.

The 14.60.249-C coin lock is the proven self-service system for secure cloakroom and valuables storage, e.g. in swimming pools, libraries, fitness centres, etc…

The locker lock 14.60.249-C can be used for lockers, lockers, school lockers, cabinets, etc.

The 14.60.249-C coin lock can be installed in most common cabinet types.

The coin deposit locks are also perfect for retrofitting existing cabinet systems.

The high-quality 14.60.249-C coin locks have a simple and robust design and are perfect for, among other things:

• Locker cabinet
• Clothes locker
• Beach hotel
• Locker
• Locker
• School locker
• Locker

Technical details:

• Design: left-hand closing
• Weight: 346 g
• Size: 110 mm (4-21/64″)
• suitable for CHF 1.- coins
• Lock cylinder diameter: 22 mm (55/64″)
• left-closing (the furniture hinge is right)
• Coin return compartment integrated with visible removal opening
• Alternative use possible with enclosed coin chip
• stable
• dark gray
• robust
• high brand quality from UMAXO®

Surface:

• Dark gray
• Coin Return Tray: Blue
• Rosette: Chrome-plated

Assembly:

• The 14.60.249-C coin locks have four mounting holes with a diameter of ⌀6.2 mm (1/4″)
• The distance between the mounting holes is 92 mm (3-5/8″) and 93 mm (3-21/32″)
• For the locking cylinder, a hole with a diameter of ⌀23 mm must be drilled in the furniture door
• The distance between the edge of the door and the hole for the locking cylinder is 29.7 mm (1-11/64″) (for more details, see
  assembly drawing
  )

Dimensions:

• Width of the deposit lock: 110 mm (4-21/64″)
• Height: 125 mm (4-59/64″)
• Lock Cylinder Diameter: ⌀22 mm (55/64″)

For more dimensions and details, see technical drawing.

Material:

• The 14.60.249-C coin locks are made of metal and robust plastic
• Lock: Metal
• Key: Brass
• Key Handle: Plastic
• Housing: Plastic
• Coin Return Compartment: Plastic
• Rosette: Metal

Included in delivery:

• One piece of coin deposit lock 14.60.249-C made of metal and robust plastic, dark grey
• Two Pieces of Deposit Key
• A piece of coin chip
• One piece of small coin return compartment
• A piece of rosette (round cover) for the lock cylinder
• A piece of sticker with the note “1 CHF”

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.60.249-C
• EAN number: 5704866051811

Manufacturer: SISO Denmark

Application:

Twist bolt lock for padlock, for lockers, sheet metal cabinet, locker cabinet and much more.

The rotary bolt lock for padlocks 14.04.587-9 is particularly suitable for installation in lockers, metal cabinets and wooden cabinets.

It can also be used to secure maintenance doors.

With the 14.04.587-9 twist bolt lock, it is possible to hook in a padlock to keep the door closed or to protect the contents of the locker.

To unlock the rotary bolt lock, the padlock must be opened and removed. The bolt is mechanically locked when the padlock is hooked in because the knob is fixed.

The 14.04.587-9 twist bolt locks are suitable for padlocks with a shackle diameter of ⌀5 mm to ⌀7 mm.

The recommended minimum width of the bracket is 16 mm.

Installation perforation: Standard door perforation 16 mm x 19 mm.

The high-quality 14.04.587-9 twist bolt locks are perfect for:

• Locker cabinet
• Maintenance door
• Wooden cabinet
• Wardrobe
• Lockers
• Tin cabinet
• Locker cabinet

Technical details:

• Version: right
• Weight: 106 g
• Size: 25 mm (1″)
• quick and easy installation
• 90° rotation
• Temple diameter: ⌀5 mm – ⌀7 mm
• minimum temple width: 16 mm
• fast and efficient locking solution
• high-quality
• stable
• black
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Black

Assembly:

• To install the 14.04.587-9 twist bolt lock in a sheet metal door, a 16.6 mm (21/32″) x 19.1 mm (3/4″) cut-out is required
• To install the rotary bolt lock in a wooden door, a hole with a diameter of ⌀19.5 mm (49/64″) is required
• The length of the lock cylinder is 25 mm (63/64″) (for more details see
  assembly drawing
  )

Dimensions:

• Twist bolt closure diameter: ⌀19 mm (3/4″)
• Depth: 25 mm (63/64″)
• Twist grip size: 1-1/32″ (26 mm) x 1-57/64″ (48 mm)

For further dimensions and details
see technical drawing
.

Material:

• The 14.04.587-9 twist bolt fasteners are made of solid die-cast zinc

Included in delivery:

• 1 piece twist bolt lock 14.04.587-9 made of solid die-cast zinc, black
• 1 piece fastening nut
• 1 piece closure plate
• 1 piece of bar
• 2 pieces of transparent washer (gasket)
• 1 piece fastening screw for bolt with toothed washer

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article identification number: 14.04.587-9
• EAN Number: 5704866042215

Manufacturer: SISO Denmark

Application:

T-handle made of zamak for control cabinet, locker, vehicle and much more.

The T-handle 14.08.056-0 is suitable for locking metal cabinets, equipment, machines, special vehicles, enclosures and containers.

To close the cabinet handle 14.08.056-0, the handle must be rotated 90 degrees, and then the key must be turned 180 degrees.

If necessary, the T-handle 14.08.056-0 can also be blocked with the key in the open position, e.g. to prevent the door from being unnecessarily locked.

The T-handle has a fixed pin cylinder.

No need to lock: the key can be removed in the open and closed position.

The high-quality 14.08.056-0 control cabinet locks have a simple and robust design and are perfect for:

• Locker
• Metal cabinet
• Sheet metal housing
• Cabinet door
• Ash pan
• Container
• Camper
• Switchboard
• Locker
• Vehicle

Technical details:

• Design: different-closing
• Weight: 241 g
• Size: 99 mm (3.9″)
• high-quality
• square: 8 x 8 mm (5/16″)
• without compulsory closing
• Mounting Type: Internal Mounting
• Reversible key (key fits into the lock on both sides)
• Drill hole spacing: 51 mm (2-1/64″)
• with permanently mounted pin cylinder
• Cylindrical Shape: Round Cylinder
• Closing movement: 90 degrees
• 400 different key variants
• Chrome-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Chrome-plated

Assembly:

• Fastening is done with M6 x 10 mm screws (not included)
• The T-handle 14.08.056-0 is for screwing
• The mounting plate of the control cabinet lock 14.08.056-0 has two mounting holes with the drill hole spacing: 51 mm (2-1/64″) (for further details see
  assembly drawing
  )

Dimensions:

• Cabinet lock length: 99 mm (3-57/64″)
• Mounting plate length: 75 mm (2-61/64″)
• Mounting plate width: 43 mm (1-11/16″)
• Drill hole spacing: 51 mm (2-1/64″)
• Square dimensions: 8 x 8 mm (5/16″)
• Square length: 3-5/64″ (78 mm)

For more dimensions and details, see technical drawing.

Manufacture:

Material:

• The control cabinet locks 14.08.056-0 are made of solid die-cast zinc

Included in delivery:

• 1 control cabinet handle 14.08.056-0 made of solid die-cast zinc, chrome-plated, with permanently mounted locking cylinder
• Two Piece Keys (Reversible Keys)

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.08.056-0
• EAN Number: 5704866044929

Manufacturer: SISO Denmark

Application:

Cross handle made of zamak for garage door and much more.

The cross handle 14.08.054-0 is suitable for most garage doors and garages.

To close the garage door handle 14.08.054-0, the handle must be turned 90 degrees, and then the key must be rotated 180 degrees.

If necessary, the cross handle 14.08.054-0 can also be blocked with the key in the open position, e.g. to avoid unwanted locking of the gate.

The cross handle has a fixed pin cylinder.

No need to lock: the key can be removed in the open and closed position.

The high-quality garage door handles 14.08.054-0 have a simple and robust design and are perfect for:

• Locker
• Locker
• Metal cabinet
• Sheet metal housing
• Cabinet door
• Ash pan
• Container
• Vehicle
• Camper
• Garage door

Technical details:

• Design: different-closing
• Weight: 230 g
• Size: 99 mm (3.9″)
• high-quality
• square: 8 x 8 mm (5/16″)
• without compulsory closing
• Mounting Type: Internal Mounting
• Reversible key (key fits into the lock on both sides)
• Drill hole spacing: 45 mm (1-49/64″)
• with permanently mounted pin cylinder
• Cylindrical Shape: Round Cylinder
• Closing movement: 90 degrees
• 400 different key variants
• Chrome-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Chrome-plated

Assembly:

• The fastening is done using the screws included in the scope of delivery (M4 x 0.7 mm)
• The cross handle 14.08.054-0 is for screwing
• The square is fastened and tightened in the cross handle with the square wrench included in the scope of delivery
• The mounting plate of the garage door handle 14.08.054-0 has two mounting holes with the drill hole spacing: 45 mm (1-49/64″)

Dimensions:

• Garage Door Handle Length: 3-57/64″ (99 mm)
• Mounting plate length: 60 mm (2-23/64″)
• Mounting plate width: 30 mm (1-3/16″)
• Drill hole spacing: 45 mm (1-49/64″)
• Square dimensions: 8 x 8 mm (5/16″)
• Square length: 127 mm (5″)

For more dimensions and details, see technical drawing.

Manufacture:

Material:

• The garage door handles 14.08.054-0 are made of solid die-cast zinc

Included in delivery:

• 1 piece garage door handle 14.08.054-0 made of solid die-cast zinc, chrome-plated, with permanently mounted locking cylinder
• Two-piece mounting screw M4 x 0.7 mm
• 1 piece square, 8 x 8 mm (5/16″), 127 mm (5″)
• Two Piece Keys (Reversible Keys)
• 1 piece of fastening screw
• 1 piece washer
• 1 piece serrated washer
• 1 square wrench

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.08.054-0
• EAN Number: 5704866506045

Manufacturer: SISO Denmark

Application:

Cross handle made of zamak for garage door and much more.

The cross handle 14.08.052-0 is suitable for most garage doors and garages.

To close the garage door handle 14.08.052-0, the handle must be turned 90 degrees, and then the key must be rotated 180 degrees.

If necessary, the cross handle 14.08.052-0 can also be blocked with the key in the open position, e.g. to avoid unwanted locking of the gate.

The cross handle has a fixed pin cylinder.

No need to lock: the key can be removed in the open and closed position.

The high-quality garage door handles 14.08.052-0 have a simple and robust design and are perfect for:

• Locker
• Locker
• Metal cabinet
• Sheet metal housing
• Cabinet door
• Ash pan
• Container
• Vehicle
• Camper
• Garage door

Technical details:

• Design: different-closing
• Weight: 190 g
• Size: 99 mm (3.9″)
• high-quality
• square: 8 x 8 mm (5/16″)
• without compulsory closing
• Reversible key (key fits into the lock on both sides)
• Drill hole spacing: 38 mm (1-1/2″)
• with permanently mounted pin cylinder
• Cylindrical Shape: Round Cylinder
• Closing movement: 90 degrees
• 400 different key variants
• Chrome-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Chrome-plated

Assembly:

• The cross handle 14.08.052-0 is for screwing
• The square is fastened and tightened in the cross handle with the square wrench included in the scope of delivery
• The mounting plate of the garage door handle 14.08.052-0 has two mounting holes with the drill hole spacing: 38 mm (1-1/2″)

Dimensions:

• Garage Door Handle Length: 3-57/64″ (99 mm)
• Mounting plate length: 60 mm (2-23/64″)
• Mounting plate width: 30 mm (1-3/16″)
• Drill hole spacing: 38 mm (1-1/2″)
• Square dimensions: 8 x 8 mm (5/16″)
• Square length: 127 mm (5″)

For more dimensions and details, see technical drawing.

Manufacture:

Material:

• The garage door handles 14.08.052-0 are made of solid die-cast zinc

Included in delivery:

• 1 piece garage door handle 14.08.052-0 made of solid die-cast zinc, chrome-plated, with permanently mounted locking cylinder
• 1 piece square, 8 x 8 mm (5/16″), 127 mm (5″)
• Two Piece Keys (Reversible Keys)
• 1 piece of fastening screw
• 1 piece washer
• 1 piece serrated washer
• 1 square wrench

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article identification number: 14.08.052-0
• EAN Number: 5704866506052

Manufacturer: SISO Denmark

Application:

Rotary bolt lock for padlock with handle function for lockers, tin cabinet, locker cabinet and much more.

The rotary bolt lock for padlocks 14.04.589-7 is particularly suitable for installation in lockers, metal cabinets and wooden cabinets.

It can also be used to secure maintenance doors.

With the rotary bolt lock 14.04.589-7 it is possible to hang a padlock to keep the door closed or to protect the contents of the locker.

To unlock the rotary bolt lock, the padlock must be opened and removed. The bolt is mechanically locked when the padlock is hooked in because the knob is fixed.

The rotary bolt locks 14.04.589-7 are suitable for padlocks with a shackle diameter of ⌀5 mm to ⌀7 mm.

The recommended minimum width of the bracket is 16 mm.

Installation perforation: Standard door perforation 16 mm x 19 mm.

The high-quality rotary bolt locks 14.04.589-7 are perfect for:

• Locker cabinet
• Maintenance door
• Wooden cabinet
• Wardrobe
• Lockers
• Tin cabinet
• Locker cabinet

Technical details:

• Version: left
• Weight: 118 g
• Size: 32 mm (1.3″)
• quick and easy installation
• 90° rotation
• Temple diameter: ⌀5 mm – ⌀7 mm
• minimum temple width: 16 mm
• fast and efficient locking solution
• high-quality
• stable
• Nickel-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Nickel-plated

Assembly:

• For the installation of the rotary bolt lock 14.04.589-7 in a sheet metal door, a cut-out 16.6 mm (21/32″) x 19.1 mm (3/4″) is required
• To install the rotary bolt lock in a wooden door, a hole with a diameter of ⌀19.5 mm (49/64″) is required
• The length of the lock cylinder is 32 mm (1-17/64″) (for more details see
  assembly drawing
  )

Dimensions:

• Twist bolt closure diameter: ⌀19 mm (3/4″)
• Depth: 32 mm (1-17/64″)
• Twist grip size: 1-1/32″ (26 mm) x 1-57/64″ (48 mm)

For more dimensions and details, see technical drawing.

Manufacture:

• The rotary bolt locks 14.04.589-7 are made of solid zamak

Included in delivery:

• 1 piece rotary bolt lock 14.04.589-7 made of solid zamak, nickel-plated
• 1 piece fastening nut
• 1 piece closure plate
• 1 piece of bar
• Two Pieces Clear Washer (Gasket)
• 1 piece fastening screw for bolt with toothed washer

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Custom ID: 14.04.589-7
• EAN number: 5704866469197

Manufacturer: SISO Denmark