Application:

Screw-in nut for furniture, wood board, chipboard, table and much more.

The 8007605 M8 x 15 mm screw-in sleeves serve as thread adapters to install metric thread M8 in wooden panels, furniture, chipboard, tables, worktops.

The robust Hex threaded bushing 8007605 is perfect for invisible screwing and particularly stable fastening of furniture, benches and wooden components. The screw-in nut 8007605 has a cover edge for flush sinking into the wood without gaps.

The screw-in socket 8007605 has a self-tapping external thread ⌀10 mm for wood and an inner metric thread M8 into which metric screws or a threaded rod can be screwed, which enables a perfect, stable wood connection several times.

The advantage of the screw-in nut 8007605 over a direct connection is that when using screw-in nuts, you can disassemble and reassemble the piece of furniture several times without making the connection less stable.

Especially with soft wood, the screw-in nut 8007605 has a great advantage over wood connection with wood screws.

This is achieved by screwing the screw-in sleeve into the wooden top of the piece of furniture 8007605 only once with the external thread ⌀10 mm and remaining there permanently. The furniture parts are then connected with the usual M8 screws, which are screwed directly to the screw-in sleeves.

The high-quality screw-in sleeves 8007605 have a simple and robust design and are perfect for, among other things:

• Chair
• Worktop
• Wooden bench
• Wooden cabinet
• Furniture
• Wooden panel
• Chipboard
• Table

Technical details:

• Weight: 3.7 g
• Size: 15 mm (19/32″)
• Female thread: M8 (5/16″)
• Male thread: 10 mm (25/64″)
• Hexagon socket: 8 mm (5/16″)
• with drop-down edge for flush sinking into the wood
• galvanized
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• The screw-in sleeves 8007605 must be screwed in at right angles to the wooden panel
• The screw-in nut is screwed in with an Allen key
• For the screw-in nut, a hole with a diameter of ⌀10 mm (25/64″) must be drilled in the wooden wall (for further details, see
  assembly drawing
  )

Dimensions:

• Screw-in nut length: 15 mm (19/32″)
• Female thread diameter: M8 (5/16″)
• Male thread diameter: ⌀10 mm (25/64″)
• Lowering crane depth: 2 mm (5/64″)

For more dimensions and details
, see technical drawing.

Material:

• The screw-in sleeves 8007605 are made of solid die-cast zinc

Included in delivery:

• 20 pieces screw-in socket 8007605 made of solid zinc die-casting, galvanised
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 8007605
• EAN number: 8432393119229

Manufacturer: EMUCA

Application:

Drive-in groove, for screws, sofa feet, cabinet feet, furniture castors, prefabricated house construction and much more.

The SC-124-8 thread is used to fasten screws, furniture feet, leveling feet, etc. under furniture, sofas, appliances, machines, etc.

The SC-124-8 Impact Nut can also be used to attach screws, Allen screws or equipment to a wooden wall or climbing wall.

The high quality impact nuts 200-041-282 are perfect for:

• Socket screw
• Climbing Hold
• Leveling feet
• Cabinet castors
• Legs
• Adjustable feet
• Containers
• Screw
• Sofa base
• Wardrobe base
• Furniture Roll
• Prefabricated house construction

Technical details:

• Weight: 6.6 g
• Size: 22.2 mm (0.9″)
• with female thread M8
• with four stable impact tips
• stable
• zinc-plated, yellow
• Steel
• robust
• high brand quality of Sugatsune / LAMP®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The top plate has four impact tips
• First of all, a hole with a diameter of ⌀11 mm (7/16″) must be drilled in the furniture floor or wooden wall at the point where the weave thread is to be placed
• Depending on the specific application, the SC-124-8 drive nut is driven into the plate from the back or the front
• Screws, furniture feet or furniture castors equipped with a screw are then screwed into the thread of the SC-124-8 mounting plate and tightened

Dimensions:

• Nut diameter (⌀D2): ⌀9.9 mm (25/64″)
• Base diameter (⌀D1): ⌀22.2 mm (7/8″)
• Height (H): 11 mm (7/16″)
• Thread (d): M8

For further dimensions and details
see technical drawing
.

Material:

• The SC-124-8 drive nuts are made of sturdy steel

Included in delivery:

• 4 pieces of drive nut SC-124-8 made of robust steel, galvanized, yellow

Manufacturer’s part numbers:

• Article ID: 200-041-282
• Item number: SC-124-8
• EAN Number: 4510932034661

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Practical impact sleeve with waistband for furniture connections and much more.

The practical impact sleeve with collar 8029105, with internal thread M8 and wide collar is perfect for resilient and detachable connections in wood-based materials such as chipboard, MDF or multiplex.

Thanks to the circumferential grooves, the self-clinching nut with internal thread M8 offers 8029105 secure hold in the drill hole and is particularly easy to install – by pressing in or driving it in lightly, without any special tools.

Advantages:
– Quick and safe assembly
– No damage to the workpiece due to external threads

– Ideal for removable furniture connections- Rust protection due to zinc
plating- Flange prevents slipping into the material

The impact sleeves are also suitable for repairs or retrofits on existing furniture.

The high-quality impact sleeves 8029105 are perfect for, among other things:

• Shelving system
• Bed
• Carcass furniture
• DIY project with wooden panels
• Living room furniture
• Office furniture
• Furniture Connections

Technical details:

• Weight: 8.7 g
• Size: 20 mm (25/32″)
• Easy installation, practical, stable
• Female thread: M8
• The socket is available in three thread variants: M6, M8 and M10
• With wide flange for high pull-out strength
• galvanized
• Steel
• robust
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• Press-fit nut with internal thread M8 8029105 is for press-fitting or driving
• To install the impact sleeve, a hole with a diameter of ⌀10.7 mm (27/64″) must be drilled (for further details, see assembly drawing)

Dimensions:

• Outer Diameter Collar: ⌀20 mm (25/32″)
• Outer diameter of socket: ⌀10.7 mm (27/64″)
• Overall Length: 18 mm (45/64″)

For more dimensions and details, see technical drawing.

Material:

• The impact sleeves 8029105 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 20 pieces press-fit nut with internal thread M8 8029105 made of robust steel, galvanized

Manufacturer’s part numbers:

• Item ID: 8029105
• EAN number: 8432393119786

Manufacturer: EMUCA