Application:

Stable height adjuster for cabinets, machines and much more.

This leveler is the perfect solution for aligning kitchen, bathroom or technical furniture quickly and permanently with precision.

The height-adjustable adjustable foot 10.17.047 enables precise alignment of furniture, machines and equipment on uneven floors.

Using the integrated M6 threaded pin and grooves on the edge of the base, the height adjuster can be adjusted by approx. 8 mm (5/16″) without tools.

The round support surface distributes the load evenly and protects the furniture floor from direct contact with the floor.

Alternatively, the adjustable foot 10.17.047 can be adjusted with a flat-head screwdriver.

The base made of black plastic with ⌀20 mm (25/32″) protects sensitive floor coverings and ensures a non-slip grip.

Thanks to the galvanised surface, the height adjuster 10.17.047 is reliably protected against corrosion and is perfect for kitchen, bathroom and workshop furniture.

The high-quality adjustable feet 10.17.047 are perfect for, among other things:

• Kitchen furniture
• Devices
• Shelves
• Chests of drawers
• Sideboards
• Tables
• Furniture carcasses
• Furniture legs
• Pitches
• uneven floors
• Bathroom cabinets
• Workbenches
• Office shelves
• Shop counters
• Motorhome furniture
• Metal cabinets
• Cupboards
• Machines

Technical details:

• Weight: 5.33 g (for 4 pieces: 21.32 g)
• Height: 15 mm (19/32″)
• Easy installation, stable
• adjustable furniture leveling foot with M6 threaded pin
• Adjustment range approx. 8 mm (5/16″)
• Adjustment without tools or via flat-head screwdriver
• Base ⌀20 mm (25/32″) made of black plastic protects sensitive floors
• Galvanized steel thread for high corrosion protection
• Black
• robust
• High brand quality from UMAXO®

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office
• Thread: galvanized

Assembly:

• First, a suitable M6 thread holder must be prepared on the underside of the furniture.
• Depending on the design, an M6 drive nut, M6 screw-in sleeve or another M6 threaded insert is used for this purpose.
• The adjustable foot is then screwed into the holder with the M6 threaded screw.
• The fine adjustment of the height is made without tools or via the slot in the bottom of the base with a flat-head screwdriver.

Dimensions:

• Height adjuster: 15 mm (19/32″)
• Foot Diameter: ⌀20 mm (25/32″)
• Footprint Height: 7 mm (9/32″)

For more dimensions and details , see technical drawing.

Material:

• The 10.17.047 adjustable feet are made of metal and robust plastic (metal and plastic)
• base made of black plastic (PA); The plastic cover protects sensitive floor coverings and ensures a non-slip grip
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 4 pieces Adjustable foot 10.17.047 made of metal and robust plastic, black, 15 mm (19/32″)
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Item ID: 10.17.047 (alternative: 10.17.047-0)
• GTIN number (EAN, UPC): 5704866009232

Manufacturer: SISO Denmark

Application:

Push-Latch for motorhome conversion, yacht interior, caravan furniture and much more.

The SL-B251-BR push button closure has a push button with a sturdy sliding latch.

Its compact design requires only a 15 mm bore and hardly protrudes, which allows for a simple front design.

The integrated spring mechanism keeps the door securely closed with about 16 kgf – even in the event of vibrations in vehicle or ship applications.

A spacer ring allows adaptation to door thicknesses of 18 to 21 mm and ensures a play-free fit.

The wear-resistant polyamide housing is lightweight, corrosion-resistant and impervious to moisture.

The high-quality push button closures 140-060-017 are perfect for, among other things:

• Shopfitting
• Trade fair furniture
• Furniture doors
• Work out
• Doors
• Lightweight furniture
• Kitchen wall units
• Motorhome conversion
• Yacht Interior
• Caravan furniture

Technical details:

• Weight: 23.5 g
• Load capacity (load capacity): 156.8 N (16 kp)
• Size: 26 mm (1-1/32″)
• Available in colors: ivory and brown
• Available for normal doors (18-21 mm) and for thick doors (22-25 mm)
• Easy installation, practical, stable
• Keeps doors securely closed by spring force
• Low-noise opening at the touch of a button
• Easy adaptation to different door thicknesses
• Corrosion-resistant, impact-resistant polyamide
• High holding force of around 16 kgf
• Suitable for furniture, vehicles and marine
• Low weight
• brown
• Robust (abrasion-resistant, resilient, resistant to many chemicals, heat-resistant)
• high brand quality of Sugatsune / LAMP®

Surface:

• Brown
• Brown gives a feeling of warmth and comfort, which creates a cozy and inviting atmosphere, ideal for living and dining areas
• Brown pairs well with wood, and is a versatile, neutral color that pairs well with other colors and materials, exuding timeless elegance

Assembly:

• Fastening is done using the six screws included in the scope of delivery (Pan-Head chipboard screw 3 x 14 mm)
• First, a main hole with a diameter of ⌀15 mm (19/32″) must be made
• Then a counter hole with a diameter of 26 mm (1-1/32″) and a depth = door thickness − 8 mm must be made on the inside of the door
• Then the push button is attached to the hole with the nut
• The bolt body is screwed into the pre-drawn slot holes with four 3 x 14 mm chipboard screws, whereby the spacer ring is inserted depending on the thickness of the door
• The counter plate is then aligned on the front side of the body and screwed so that the bolt clicks into place cleanly
• Finally, the closing function is checked and, if necessary, fine-tuned via the slotted holes (for further details, see assembly drawing)

Dimensions:

• Push button closure length: 40 mm (1-37/64″)
• Width: 36 mm (1-27/64″)
• Depth: 15 mm (19/32″)
• Snap Diameter: ⌀20.5 mm (13/16″)

For more dimensions and details, see technical drawing.

Material:

• The push button closures 140-060-017 are made of robust polyamide (PA, nylon)
• Polyamide is ideal for furniture hardware and industrial hardware because it is robust, corrosion-resistant, noise-absorbing and slippery, which allows for durable and easily movable hardware.

Included in delivery:

• 1 piece push-button closure 140-060-017 made of robust polyamide, brown
• 1 piece of strike plate
• 1 piece spacer ring
• 1 piece push button
• 6 Pan-Head chipboard screws 3 x 14 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 140-060-017
• Item number: SL-B251-BR
• EAN number: 4510932059565

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Push-Latch for motorhome conversion, yacht interior, caravan furniture and much more.

The SL-B251-I push button closure has a push button with a sturdy sliding latch.

Its compact design requires only a 15 mm bore and hardly protrudes, which allows for a simple front design.

The integrated spring mechanism keeps the door securely closed with about 16 kgf – even in the event of vibrations in vehicle or ship applications.

A spacer ring allows adaptation to door thicknesses of 18 to 21 mm and ensures a play-free fit.

The wear-resistant polyamide housing is lightweight, corrosion-resistant and impervious to moisture.

The high-quality push button closures 140-060-016 are perfect for, among other things:

• Shopfitting
• Trade fair furniture
• Furniture doors
• Work out
• Doors
• Lightweight furniture
• Kitchen wall units
• Motorhome conversion
• Yacht Interior
• Caravan furniture

Technical details:

• Weight: 23.5 g
• Load capacity (load capacity): 156.8 N (16 kp)
• Size: 26 mm (1-1/32″)
• Available in colors: ivory and brown
• Available for normal doors (18-21 mm) and for thick doors (22-25 mm)
• Easy installation, practical, stable
• Keeps doors securely closed by spring force
• Low-noise opening at the touch of a button
• Easy adaptation to different door thicknesses
• Corrosion-resistant, impact-resistant polyamide
• Compact installation depth, ideal for thin fronts
• High holding force of around 16 kgf
• Suitable for furniture, vehicles and marine
• Low weight
• Ivory
• Robust (abrasion-resistant, resilient, resistant to many chemicals, heat-resistant)
• high brand quality of Sugatsune / LAMP®

Surface:

• Ivory
• Ivory finishes create a warm and inviting atmosphere that is at the same time discreet and elegant, ideal for living rooms and bedrooms
• In addition, ivory can be combined well with other colours and materials, making it versatile and harmoniously complementing different furnishing styles

Assembly:

• Fastening is done using the six screws included in the scope of delivery (Pan-Head chipboard screw 3 x 14 mm)
• First, a main hole with a diameter of ⌀15 mm (19/32″) must be made
• Then a counter hole with a diameter of 26 mm (1-1/32″) and a depth = door thickness − 8 mm must be made on the inside of the door
• Then the push button is attached to the hole with the nut
• The bolt body is screwed into the pre-drawn slot holes with four 3 x 14 mm chipboard screws, whereby the spacer ring is inserted depending on the thickness of the door
• The counter plate is then aligned on the front side of the body and screwed so that the bolt clicks into place cleanly
• Finally, the closing function is checked and, if necessary, fine-tuned via the slotted holes (for further details, see assembly drawing)

Dimensions:

• Push button closure length: 40 mm (1-37/64″)
• Width: 36 mm (1-27/64″)
• Depth: 15 mm (19/32″)
• Snap Diameter: ⌀20.5 mm (13/16″)

For more dimensions and details, see technical drawing.

Material:

• The push button closures 140-060-016 are made of robust polyamide (PA, nylon)
• Polyamide is ideal for furniture hardware and industrial hardware because it is robust, corrosion-resistant, noise-absorbing and slippery, which allows for durable and easily movable hardware.

Included in delivery:

• 1 piece push button closure 140-060-016 made of robust polyamide, ivory
• 1 piece of strike plate
• 1 piece spacer ring
• 1 piece push button
• 6 Pan-Head chipboard screws 3 x 14 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 140-060-016
• Item number: SL-B251-I
• EAN number: 4510932059558

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Push-Latch for motorhome conversion, yacht interior, caravan furniture and much more.

The SL-B211-BR push button closure has a push button with a sturdy sliding latch.

Its compact design requires only a 15 mm bore and hardly protrudes, which allows for a simple front design.

The integrated spring mechanism keeps the door securely closed with about 16 kgf – even in the event of vibrations in vehicle or ship applications.

A spacer ring allows adaptation to door thicknesses of 18 to 21 mm and ensures a play-free fit.

The wear-resistant polyamide housing is lightweight, corrosion-resistant and impervious to moisture.

The high-quality push button closures 140-060-011 are perfect for, among other things:

• Shopfitting
• Trade fair furniture
• Furniture doors
• Work out
• Doors
• Lightweight furniture
• Kitchen wall units
• Motorhome conversion
• Yacht Interior
• Caravan furniture

Technical details:

• Weight: 23.5 g
• Load capacity (load capacity): 156.8 N (16 kp)
• Size: 26 mm (1-1/32″)
• Available in colors: ivory and brown
• Available for normal doors (18-21 mm) and for thick doors (22-25 mm)
• Easy installation, practical, stable
• Keeps doors securely closed by spring force
• Low-noise opening at the touch of a button
• Easy adaptation to different door thicknesses
• Corrosion-resistant, impact-resistant polyamide
• Compact installation depth, ideal for thin fronts
• High holding force of around 16 kgf
• Suitable for furniture, vehicles and marine
• Low weight
• brown
• Robust (abrasion-resistant, resilient, resistant to many chemicals, heat-resistant)
• high brand quality of Sugatsune / LAMP®

Surface:

• Brown
• Brown gives a feeling of warmth and comfort, which creates a cozy and inviting atmosphere, ideal for living and dining areas
• Brown pairs well with wood, and is a versatile, neutral color that pairs well with other colors and materials, exuding timeless elegance

Assembly:

• Fastening is done using the six screws included in the scope of delivery (Pan-Head chipboard screw 3 x 14 mm)
• First, a main hole with a diameter of ⌀15 mm (19/32″) must be made
• Then a counter hole with a diameter of 26 mm (1-1/32″) and a depth = door thickness − 8 mm must be made on the inside of the door
• Then the push button is attached to the hole with the nut
• The bolt body is screwed into the pre-drawn slot holes with four 3 x 14 mm chipboard screws, whereby the spacer ring is inserted depending on the thickness of the door
• The counter plate is then aligned on the front side of the body and screwed so that the bolt clicks into place cleanly
• Finally, the closing function is checked and, if necessary, fine-tuned via the slotted holes (for further details, see assembly drawing)

Dimensions:

• Push button closure length: 40 mm (1-37/64″)
• Width: 36 mm (1-27/64″)
• Depth: 15 mm (19/32″)
• Snap Diameter: ⌀20.5 mm (13/16″)

For more dimensions and details, see technical drawing.

Material:

• The push button closures 140-060-011 are made of robust polyamide (PA, nylon)
• Polyamide is ideal for furniture hardware and industrial hardware because it is robust, corrosion-resistant, noise-absorbing and slippery, which allows for durable and easily movable hardware.

Included in delivery:

• 1 piece push button closure 140-060-011 made of robust polyamide, brown
• 1 piece of strike plate
• 1 piece spacer ring
• 1 piece push button
• 6 Pan-Head chipboard screws 3 x 14 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 140-060-011
• Item number: SL-B211-BR
• EAN number: 4510932059541

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Push-Latch for motorhome conversion, yacht interior, caravan furniture and much more.

The SL-B211-I push button closure has a push button with a sturdy sliding latch.

Its compact design requires only a 15 mm bore and hardly protrudes, which allows for a simple front design.

The integrated spring mechanism keeps the door securely closed with about 16 kgf – even in the event of vibrations in vehicle or ship applications.

A spacer ring allows adaptation to door thicknesses of 18 to 21 mm and ensures a play-free fit.

The wear-resistant polyamide housing is lightweight, corrosion-resistant and impervious to moisture.

The high-quality push button closures 140-060-010 are perfect for, among other things:

• Shopfitting
• Trade fair furniture
• Furniture doors
• Work out
• Doors
• Lightweight furniture
• Kitchen wall units
• Motorhome conversion
• Yacht Interior
• Caravan furniture

Technical details:

• Weight: 23.5 g
• Load capacity (load capacity): 156.8 N (16 kp)
• Size: 26 mm (1-1/32″)
• Available in colors: ivory and brown
• Available for normal doors (18-21 mm) and for thick doors (22-25 mm)
• Easy installation, practical, stable
• Keeps doors securely closed by spring force
• Low-noise opening at the touch of a button
• Easy adaptation to different door thicknesses
• Corrosion-resistant, impact-resistant polyamide
• Compact installation depth, ideal for thin fronts
• High holding force of around 16 kgf
• Suitable for furniture, vehicles and marine
• Low weight
• Ivory
• Robust (abrasion-resistant, resilient, resistant to many chemicals, heat-resistant)
• high brand quality of Sugatsune / LAMP®

Surface:

• Ivory
• Ivory finishes create a warm and inviting atmosphere that is at the same time discreet and elegant, ideal for living rooms and bedrooms
• In addition, ivory can be combined well with other colours and materials, making it versatile and harmoniously complementing different furnishing styles

Assembly:

• Fastening is done using the six screws included in the scope of delivery (Pan-Head chipboard screw 3 x 14 mm)
• First, a main hole with a diameter of ⌀15 mm (19/32″) must be made
• Then a counter hole with a diameter of 26 mm (1-1/32″) and a depth = door thickness − 8 mm must be made on the inside of the door
• Then the push button is attached to the hole with the nut
• The bolt body is screwed into the pre-drawn slot holes with four 3 x 14 mm chipboard screws, whereby the spacer ring is inserted depending on the thickness of the door
• The counter plate is then aligned on the front side of the body and screwed so that the bolt clicks into place cleanly
• Finally, the closing function is checked and, if necessary, fine-tuned via the slotted holes (for further details, see assembly drawing)

Dimensions:

• Push button closure length: 40 mm (1-37/64″)
• Width: 36 mm (1-27/64″)
• Depth: 15 mm (19/32″)
• Snap Diameter: ⌀20.5 mm (13/16″)

For more dimensions and details, see technical drawing.

Material:

• The push button closures 140-060-010 are made of robust polyamide (PA, nylon)
• Polyamide is ideal for furniture hardware and industrial hardware because it is robust, corrosion-resistant, noise-absorbing and slippery, which allows for durable and easily movable hardware.

Included in delivery:

• 1 piece push button closure 140-060-010 made of robust polyamide, ivory
• 1 piece of strike plate
• 1 piece spacer ring
• 1 piece push button
• 6 Pan-Head chipboard screws 3 x 14 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 140-060-010
• Item number: SL-B211-I
• EAN number: 4510932059534

Manufacturer: Sugatsune / LAMP® (Japan)