Application:

Robust plug-in hinge for small doors, maintenance hatches, electronics housings and much more.

Version: right. For right-hinged doors and flaps.

The compact B-56-R push-in hinge is used for the movable connection of small doors, flaps and housing parts.

Thanks to the two-part plug-in construction, the door can be lifted off the permanently mounted hinge part if necessary without having to unscrew the hinge.

The right-hand version allows targeted use with the appropriate design: right. For right-hinged doors and flaps. hinged doors and equipment flaps.

With a height of only 35 mm (1-3/8″), the hinge is particularly suitable for compact device housings, measuring instruments as well as electronic and technical equipment.

The cold-rolled steel sheet ensures a stable construction, while the galvanized and chromated surface protects the steel from corrosion.

When using two hinges mounted on top of each other, the B-56-R lift-out hinge is suitable for lightweight doors with a reference weight of 2 kg.

The high-quality B-56-R poster hinges are perfect for, among other things:

• Device Enclosures
• Audio Devices
• Communication Devices
• Measuring instruments
• Small doors
• Maintenance hatches
• Housing

Technical details:

• Version: right
• Weight: 8 g (for 2 pieces: 16 g)
• Load capacity (load capacity): 2 kg (5 lbs) – for 2 pieces
• Height: 35 mm (1-3/8″)
• Available in 2 versions: left (B-56-L) and right (B-56-R)
• Easy installation, stable
• Compact push-in hinge for small doors
• Detachable two-piece construction
• Door or flap can be removed without unscrewing the hinge
• Material thickness: 0.8 mm (1/32″)
• Surface treatment MFZn-C
• 4 mounting holes
• ⌀3 mm (1/8″) hinge pin
• Suitable for measuring instruments and technical devices
• RoHS10 compliant
• Galvanized, yellow
• steel, robust
• High brand quality from TAKIGEN®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The fastening is done with screws with approx. ⌀2.3 to 2.5 mm, preferably with a lens or round head (not included)
• The B-56-R plug-in hinge is positioned on the door or flap and the associated frame or housing
• Pay attention to the right-hand version so that the hinge is mounted to match a right-hinged door or equipment flap
• First, the positions of the four mounting holes must be marked according to the hole pattern
• Depending on the material used, suitable fastening holes or pre-drillings must then be drilled
• The two hinge halves are attached to the movable and fixed component with suitable screws
• The hinge axes of at least two hinges mounted on top of each other must align exactly
• Then the moving part is attached to the hinge pin from above
• To remove the door or flap, it is lifted and removed from the permanently mounted hinge part

Dimensions:

• Total height of lifting hinge B-56-R: 35 mm (1-3/8″)
• Overall width, unfolded: 24 mm (15/16″)
• Material thickness: 0.8 mm (1/32″)
• Vertical hole spacing: 19 mm (3/4″)
• Horizontal hole spacing: 14 mm (35/64″)
• Mounting holes: 4 x ⌀2.5 mm (3/32″)
• Hinge pin: ⌀3 mm (1/8″)
• Outer diameter of the hinge roller: approx. ⌀5 mm

For more dimensions and details , see technical drawing.

Material:

• The B-56-R flagship hinges are made of robust steel
• Steel is ideal for furniture fittings and industrial fittings because it is both robust and durable, which ensures high resilience and long service life of the fittings

Included in delivery:

• 2 pieces B-56-R (10150) plug-in hinge made of robust steel, galvanized, yellow, 35 mm (1-3/8″), version: right
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10150
• Item number: B-56-R

Manufacturer: TAKIGEN (Japan)

Application:

Robust lifting hinge for doors, maintenance hatches and much more.

Version: right. For right-hinged doors and flaps.

The lifting hinge B-1004-3-R (10568) connects doors or flaps to a housing in a detachable way.

By lifting, the moving component can be separated from the permanently mounted hinge part without loosening the fastening screws.

The SUS304 material and mirror-polished surface provide high corrosion resistance for kitchen, marine and outdoor applications.

Six countersunk holes enable flush and low-interference fastening with M3 countersunk screws.

When using two hinges vertically, TAKIGEN cites a door mass of 7 kg (16 lbs) as a reference value.

The high-quality B-1004-3-R flagship hinges are perfect for, among other things:

• Outer housing
• Machine doors
• Equipment doors
• Machine covers
• Kitchen appliance doors
• Doors
• Maintenance hatches

Technical details:

• Version: right
• Weight: 30 g (for 2 pieces: 60 g)
• Load capacity (load capacity): 7 kg (16 lbs) – for 2 pieces
• Height: 50 mm (1-31/32″)
• Available in 2 finishes: left and right, in 2 materials: SUS304 stainless steel and steel, and in 3 lengths: 50 mm, 64 mm and 75 mm
• Easy installation, stable
• Detachable two-piece construction
• Material thickness: 1.5 mm (1/16″)
• Six countersunk holes for M3 screws
• ⌀4 mm (5/32″) hinge pin
• Door can be removed without loosening the screws
• Suitable for indoor and outdoor applications
• RoHS10 compliant
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• Fastening is done with 6 pieces of M3 countersunk screws (not included)
• B-1004-3-R (10568) has 6 mounting holes
• The distance between the mounting holes is 21 mm (53/64″) horizontally and 20 mm (25/32″) vertically
• First of all, the positions of the two hinge halves must be marked according to the right direction of the stop and the six attachment points must be prepared
• The hinge half on the housing side is fastened with three M3 countersunk screws
• The hinge half on the door side is also mounted with three M3 countersunk screws
• Both halves of the hinge must be aligned so that the hinge pin can be inserted without tension
• The door or flap is then attached to the hinge pin from above
• Finally, it is necessary to check the smoothness, complete engagement of the pin and the tight fit of all screws

Dimensions:

• Total height of lifting hinge: 50 mm (1-31/32″)
• Width: 32 mm (1-17/64″)
• Hinge pin diameter: ⌀4 mm (5/32″)

For more dimensions and details , see technical drawing.

Material:

• The B-1004-3-R flagship hinges are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive, polished or satin finish that is both modern and easy to maintain

Included in delivery:

• 2 pieces lifting hinge B-1004-3-R (10568) made of solid stainless steel SUS304, glossy polished, 50 mm (1-31/32″), version: right
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10568
• Item number: B-1004-3-R
• GTIN number (EAN, UPC): 0618455525889

Manufacturer: TAKIGEN (Japan)

Application:

Robust lifting hinge for doors, maintenance hatches and much more.

Version: right. For right-hinged doors and flaps.

The lifting hinge B-1004-2-R (10566) connects doors or flaps to a housing in a detachable way.

By lifting, the moving component can be separated from the permanently mounted hinge part without loosening the fastening screws.

The SUS304 material and mirror-polished surface provide high corrosion resistance for kitchen, marine and outdoor applications.

Six countersunk holes enable flush and low-interference fastening with M3 countersunk screws.

When using two hinges vertically, TAKIGEN cites a door mass of 10 kg (23 lbs) as a reference value.

The high-quality B-1004-2-R poster hinges are perfect for, among other things:

• Outer housing
• Machine doors
• Equipment doors
• Machine covers
• Kitchen appliance doors
• Doors
• Maintenance hatches

Technical details:

• Version: right
• Weight: 40 g (for 2 pieces: 80 g)
• Load capacity (load capacity): 10 kg (23 lbs) – for 2 pieces
• Height: 64 mm (2-33/64″)
• Available in 2 finishes: left and right, in 2 materials: SUS304 stainless steel and steel, and in 3 lengths: 50 mm, 64 mm and 75 mm
• Easy installation, stable
• Detachable two-piece construction
• Material thickness: 1.5 mm (1/16″)
• Six countersunk holes for M3 screws
• ⌀4 mm (5/32″) hinge pin
• Door can be removed without loosening the screws
• Suitable for indoor and outdoor applications
• RoHS10 compliant
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• Fastening is done with 6 pieces of M3 countersunk screws (not included)
• Flagship hinge B-1004-2-R (10566) has 6 mounting holes
• The distance between the mounting holes is 24 mm (15/16″) horizontally and 24 mm (15/16″) vertically
• First of all, the positions of the two hinge halves must be marked according to the right direction of the stop and the six attachment points must be prepared
• The hinge half on the housing side is fastened with three M3 countersunk screws
• The hinge half on the door side is also mounted with three M3 countersunk screws
• Both halves of the hinge must be aligned so that the hinge pin can be inserted without tension
• The door or flap is then attached to the hinge pin from above
• Finally, it is necessary to check the smoothness, complete engagement of the pin and the tight fit of all screws

Dimensions:

• Total Lifting Hinge Height: 64 mm (2-33/64″)
• Width: 36 mm (1-27/64″)
• Hinge pin diameter: ⌀4 mm (5/32″)

For more dimensions and details , see technical drawing.

Material:

• The B-1004-2-R flagship hinges are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive, polished or satin finish that is both modern and easy to maintain

Included in delivery:

• 2 pieces lifting hinge B-1004-2-R (10566) made of solid stainless steel SUS304, glossy polished, 64 mm (2-33/64″), version: right
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10566
• Item number: B-1004-2-R
• GTIN number (EAN, UPC): 0618455525865

Manufacturer: TAKIGEN (Japan)

Application:

Robust lifting hinge for doors, maintenance hatches and much more.

Version: right. For right-hinged doors and flaps.

The lifting hinge B-1004-1-R (10564) connects doors or flaps to a housing in a detachable manner.

By lifting, the moving component can be separated from the permanently mounted hinge part without loosening the fastening screws.

The left and right versions are intended for appropriately hinged constructions.

The SUS304 material and mirror-polished surface provide high corrosion resistance for kitchen, marine and outdoor applications.

Six countersunk holes enable flush and low-interference fastening with M3 countersunk screws.

When using two hinges vertically, TAKIGEN cites a door mass of 15 kg as a reference value.

The high-quality B-1004-1-R poster hinges are perfect for, among other things:

• Outer housing
• Equipment doors
• Machine covers
• Kitchen appliance doors
• Doors
• Maintenance hatches

Technical details:

• Version: right
• Weight: 65 g (for 2 pieces: 130 g)
• Load capacity (load capacity): 15 kg (34 lbs) – for 2 pieces
• Height: 75 mm (2-61/64″)
• Available in 2 finishes: left and right, in 2 materials: SUS304 stainless steel and steel, and in 3 lengths: 50 mm, 64 mm and 75 mm
• Easy installation, stable
• Detachable two-piece construction
• High corrosion resistance
• Material thickness: 2 mm (5/64″)
• Six countersunk holes for M3 screws
• ⌀4 mm (5/32″) hinge pin
• Door can be removed without loosening the screws
• Suitable for indoor and outdoor applications
• RoHS10 compliant
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• Fastening is done with 6 pieces of M3 countersunk screws (not included)
• the B-1004-1-R (10564) has 6 mounting holes
• The distance between the mounting holes is 24 mm (15/16″) horizontally and 30 mm (1-3/16″) vertically
• First of all, the positions of the two hinge halves must be marked according to the right direction of the stop and the six attachment points must be prepared
• The hinge half on the housing side is fastened with three M3 countersunk screws
• The hinge half on the door side is also mounted with three M3 countersunk screws
• Both halves of the hinge must be aligned so that the hinge pin can be inserted without tension
• The door or flap is then attached to the hinge pin from above
• Finally, it is necessary to check the smoothness, complete engagement of the pin and the tight fit of all screws

Dimensions:

• Total Lifting Hinge Height: 75 mm (2-61/64″)
• Width: 38 mm (1-1/2″)
• Hinge pin diameter: ⌀4 mm (5/32″)

For more dimensions and details , see technical drawing.

Material:

• The B-1004-1-R flagship hinges are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive, polished or satin finish that is both modern and easy to maintain

Included in delivery:

• 2 pieces lifting hinge B-1004-1-R (10564) made of solid stainless steel SUS304, glossy polished, 75 mm (2-61/64″), version: right
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10564
• Item number: B-1004-1-R
• GTIN number (EAN, UPC): 0618455525841

Manufacturer: TAKIGEN (Japan)