Application:

Stable height adjuster for cabinets, machines and much more.

This leveler is the perfect solution for aligning kitchen, bathroom or technical furniture quickly and permanently with precision.

The height-adjustable adjustable foot 10.17.047 enables precise alignment of furniture, machines and equipment on uneven floors.

Using the integrated M6 threaded pin and grooves on the edge of the base, the height adjuster can be adjusted by approx. 8 mm (5/16″) without tools.

The round support surface distributes the load evenly and protects the furniture floor from direct contact with the floor.

Alternatively, the adjustable foot 10.17.047 can be adjusted with a flat-head screwdriver.

The base made of black plastic with ⌀20 mm (25/32″) protects sensitive floor coverings and ensures a non-slip grip.

Thanks to the galvanised surface, the height adjuster 10.17.047 is reliably protected against corrosion and is perfect for kitchen, bathroom and workshop furniture.

The high-quality adjustable feet 10.17.047 are perfect for, among other things:

• Kitchen furniture
• Devices
• Shelves
• Chests of drawers
• Sideboards
• Tables
• Furniture carcasses
• Furniture legs
• Pitches
• uneven floors
• Bathroom cabinets
• Workbenches
• Office shelves
• Shop counters
• Motorhome furniture
• Metal cabinets
• Cupboards
• Machines

Technical details:

• Weight: 5.33 g (for 4 pieces: 21.32 g)
• Height: 15 mm (19/32″)
• Easy installation, stable
• adjustable furniture leveling foot with M6 threaded pin
• Adjustment range approx. 8 mm (5/16″)
• Adjustment without tools or via flat-head screwdriver
• Base ⌀20 mm (25/32″) made of black plastic protects sensitive floors
• Galvanized steel thread for high corrosion protection
• Black
• robust
• High brand quality from UMAXO®

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office
• Thread: galvanized

Assembly:

• First, a suitable M6 thread holder must be prepared on the underside of the furniture.
• Depending on the design, an M6 drive nut, M6 screw-in sleeve or another M6 threaded insert is used for this purpose.
• The adjustable foot is then screwed into the holder with the M6 threaded screw.
• The fine adjustment of the height is made without tools or via the slot in the bottom of the base with a flat-head screwdriver.

Dimensions:

• Height adjuster: 15 mm (19/32″)
• Foot Diameter: ⌀20 mm (25/32″)
• Footprint Height: 7 mm (9/32″)

For more dimensions and details , see technical drawing.

Material:

• The 10.17.047 adjustable feet are made of metal and robust plastic (metal and plastic)
• base made of black plastic (PA); The plastic cover protects sensitive floor coverings and ensures a non-slip grip
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 4 pieces Adjustable foot 10.17.047 made of metal and robust plastic, black, 15 mm (19/32″)
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Item ID: 10.17.047 (alternative: 10.17.047-0)
• GTIN number (EAN, UPC): 5704866009232

Manufacturer: SISO Denmark

Application:

Stable height adjuster for cabinets, kitchen furniture, industrial furniture and much more.

This leveler is the perfect solution for aligning kitchen, bathroom or technical furniture quickly and permanently with precision.

The height-adjustable adjustable foot 3016805 enables precise alignment of furniture on uneven floors.

Its robust steel bracket is screwed to the inside of the body and supports up to 60 kg per foot.

The foot can be adjusted by approx. 25 mm (63/64″) with a 4 mm Allen key via the integrated M10 threaded pin.

The base made of black plastic with ⌀23 mm (29/32″) protects sensitive floor coverings and ensures a non-slip grip.

A discreet cover cap conceals the hole for adjustment and gives the construction a clean appearance.

Thanks to the galvanized surface, the height adjuster is 3016805 reliably protected against corrosion and is perfect for kitchen, bathroom and workshop furniture.

The high-quality adjustable feet 3016805 are perfect for, among other things:

• Bathroom cabinets
• Workbenches
• Office shelves
• Shop counters
• Desks
• Showcases
• RV Furniture
• Cupboards
• Kitchen furniture
• Industrial furniture

Technical details:

• Weight: 73.8 g
• Load capacity (load capacity): 120 kg (265 lbs) – for 2 pieces
• Size: 23 mm (29/32″)
• Easy installation, practical, stable
• Internally adjustable furniture leveling foot with M10 threaded pin
• Adjustment range approx. 25 mm (63/64″) (minimum height 46 mm / maximum height 71 mm)
• Adjustment via 4 mm Allen key
• Base ⌀23 mm (29/32″) made of black plastic protects sensitive floors
• Robust corner bracket made of galvanized steel 40 mm (1-37/64″) x 52 mm (2-3/64″)
• Material thickness: 2.5 mm
• Secure screwing on the side of the body
• Galvanized steel parts for high corrosion protection
• Plastic cap conceals the adjustment
• Load capacity up to 60 kg per foot (approx. 240 kg per piece of furniture for four legs)
• galvanized
• Steel (robust)
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• Fastening is done with pan head wood screw with 3.5 x 16 mm screws (not included)
• The adjustable foot 3016805 has two mounting holes with a diameter of ⌀4 mm (5/32″)
• The distance between the mounting holes is 32 mm (1-17/64″)
• The steel bracket of the height adjuster 3016805 is screwed flush to the inner wall of the furniture
• The foot of the height adjuster is then adjusted to the desired height from the inside with a 4 mm Allen key until the body is horizontal
• The integrated plastic cap protects the floor; an additional sliding pad is not required
• To adjust the height adjuster 3016805, a hole with a diameter of ⌀25 mm (63/64″) must be drilled in the bottom of the cabinet (for more details, see assembly drawing)

Dimensions:

• Height adjuster height: 52 mm (2-3/64″)
• Foot/Cover Cap Diameter: ⌀23 mm (29/32″)
• Mounting bracket depth: 18 mm

For more dimensions and details, see technical drawing.

Material:

• The adjustable feet 3016805 are made of robust steel
• The base and cover cap are made of black plastic (PA 6); The plastic cover protects sensitive floor coverings and ensures a non-slip grip
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• Two pieces of adjustable foot 3016805 made of robust steel, galvanized
• Plastic cover cap to cover the adjustment hole
• Attention: the 4 mm Allen key is not included in the scope of delivery

Manufacturer’s part numbers:

• Article ID: 3016805
• EAN number: 8432393104478

Manufacturer: EMUCA

Usage:

High-quality solid and elegant pushlock made of ZDC for drawer, motorhome furniture, boats, private planes and much more.

The PK04BN push-button handles can be recessed into the door surface when not in use. This is particularly practical for mobile spaces such as caravans, caravans, yachts, ships and private aircraft.

The high-quality push-button handles PK04BN have an attractive natural design and are perfect for, among other things:

• Cruise ships
• Yachts
• Cabinet furniture door
• Drawer
• RV Furniture
• Boats
• Private planes

Technical details:

• Weight: 76 g
• Load capacity (load capacity): 2 kg
• Size: 19 mm (0.8″)
• Elaborately processed
• High-quality
• Ergonomic
• Stable
• Robust
• Black nickel
• Zinc alloy
• ZDC
• Zinc die casting
• high brand quality of Sugatsune / LAMP®

Surface:

• Black nickel

Assembly:

• The fastening is done with the help of the screws included in the scope of delivery (flat round head screw M3 x 20 mm)
• The snap handle has a mounting hole with internal thread
• For doors with a width of 15 mm (19/32″) to 25 mm (63/64″), only one hole with a diameter of ⌀25 mm (63/64″) needs to be drilled
• For doors with a width of 26 mm (1-1/32″) to 35 mm (1-3/8″), a partial hole with a diameter of ⌀40 mm must also be drilled in order to (partially) store the counterpart there (for further details see
  assembly drawing
  )

Dimensions:

• Push button handle diameter (⌀D): ⌀19 mm (3/4″)
• Length (H): 19 mm (3/4″)

For further dimensions and details
see technical drawing
.

Manufacture:

• The high-quality push-button handles PK04BN are made of solid zinc alloy (ZDC)

Included in delivery:

• 1 piece push button handle PK04BN made of solid zinc alloy, black nickel
• 1 piece flat round head screw M3 x 20 mm made of steel

Additional information:

• • Download assembly instructions

Manufacturer’s part numbers:

• • • Item identification number: 100-015-026
    • Item number: PK04BN
    • EAN number: 4510932012287

Manufacturer: Sugatsune / LAMP® (Japan)

Usage:

High-quality solid and elegant pushlock made of ZDC for drawer, motorhome furniture, boats, private planes and much more.

The PK04CR push-button handles can be recessed into the door surface when not in use. This is particularly practical for mobile spaces such as caravans, caravans, yachts, ships and private aircraft.

The high-quality push-button handles PK04CR have an attractive natural design and are perfect for, among other things:

• Cruise ships
• Yachts
• Cabinet furniture door
• Drawer
• RV Furniture
• Boats
• Private planes

Technical details:

• Weight: 76 g
• Load capacity (load capacity): 2 kg
• Size: 19 mm (0.8″)
• Elaborately processed
• High-quality
• Ergonomic
• Stable
• Robust
• Chrome-plated
• Zinc alloy
• ZDC
• Zinc die casting
• high brand quality of Sugatsune / LAMP®

Surface:

• Chrome-plated

Assembly:

• The fastening is done with the help of the screws included in the scope of delivery (flat round head screw M3 x 20)
• The snap handle has a mounting hole with internal thread
• For doors with a width of 15 mm (19/32″) to 25 mm (63/64″), only one hole with a diameter of ⌀25 mm (63/64″) needs to be drilled
• For doors with a width of 26 mm (1-1/32″) to 35 mm (1-3/8″), a partial hole with a diameter of ⌀40 mm must also be drilled in order to (partially) store the counterpart there (for further details see
  assembly drawing
  )

Dimensions:

• Push button handle diameter (⌀D): ⌀19 mm (3/4″)
• Length (H): 19 mm (3/4″)

For further dimensions and details
see technical drawing
.

Manufacture:

• The high-quality push-button handles PK04CR are made of solid zinc alloy (ZDC)

Included in delivery:

• 1 piece push button handle PK04CR made of solid zinc alloy, chrome-plated
• 1 piece flat round head screw M3 x 20 made of steel

Additional information:

• • Download assembly instructions

Manufacturer’s part numbers:

• • • Item identification number: 100-015-024
    • Item number: PK04CR
    • EAN number: 4510932012270

Manufacturer: Sugatsune / LAMP® (Japan)

Usage:

High-quality solid and elegant pushlock made of ZDC for drawer, motorhome furniture, boats, private planes and much more.

The PK04GA push-button handles can be recessed into the door surface when not in use. This is particularly practical for mobile spaces such as caravans, caravans, yachts, ships and private aircraft.

The high-quality push-button handles PK04GA have an attractive natural design and are perfect for, among other things:

• Cruise ships
• Yachts
• Cabinet furniture door
• Drawer
• RV Furniture
• Boats
• Private planes

Technical details:

• Weight: 76 g
• Load capacity (load capacity): 2 kg
• Size: 19 mm (0.8″)
• Elaborately processed
• High-quality
• Ergonomic
• Stable
• Robust
• Gold-coloured, shiny polished
• Zinc alloy
• ZDC
• Zinc die casting
• high brand quality of Sugatsune / LAMP®

Surface:

• Gold-coloured, shiny polished

Assembly:

• The fastening is done with the help of the screws included in the scope of delivery (flat round head screw M3 x 20)
• The snap handle has a mounting hole with internal thread
• For doors with a width of 15 mm (19/32″) to 25 mm (63/64″), only one hole with a diameter of ⌀25 mm (63/64″) needs to be drilled
• For doors with a width of 26 mm (1-1/32″) to 35 mm (1-3/8″), a partial hole with a diameter of ⌀40 mm must also be drilled in order to (partially) store the counterpart there (for further details see
  assembly drawing
  )

Dimensions:

• Push button handle diameter (⌀D): ⌀19 mm (3/4″)
• Length (H): 19 mm (3/4″)

For further dimensions and details
see technical drawing
.

Manufacture:

• The high-quality push-button handles PK04GA are made of solid zinc alloy (ZDC)

Included in delivery:

• 1 piece push button handle PK04GA made of solid zinc alloy, gold-colored, glossy polished
• 1 piece flat round head screw M3 x 20 made of steel

Additional information:

• • Download assembly instructions

Manufacturer’s part numbers:

• • • Item identification number: 100-015-025
    • Item number: PK04GA
    • EAN number: 4510932012263

Manufacturer: Sugatsune / LAMP® (Japan)

Usage:

High-quality solid and elegant pushlock made of ZDC for drawer, motorhome furniture, boats, private planes and much more.

The PK03BN push-button handles can be recessed into the door surface when not in use. This is particularly practical for mobile spaces such as caravans, caravans, yachts, ships and private aircraft.

The high-quality push-button handles PK03BN have an attractive natural design and are perfect for, among other things:

• Cruise ships
• Yachts
• Cabinet furniture door
• Drawer
• RV Furniture
• Boats
• Private planes

Technical details:

• Weight: 67 g
• Size: 18.8 mm (0.8″)
• Elaborately processed
• High-quality
• Ergonomic
• Stable
• Robust
• Black nickel
• High brand quality from Sugatsune / LAMP®.

Surface:

• Black nickel

Assembly:

• The fastening is done with the help of the screws included in the scope of delivery (flat round head screw M3 x 20)
• The snap handle has a mounting hole with internal thread
• For doors with a width of 15 mm (19/32″) to 25 mm (63/64″), only one hole with a diameter of ⌀25 mm (63/64″) needs to be drilled
• For doors with a door thickness of 26 mm (1-1/32″) to 35 mm (1-3/8″), a partial hole with a diameter of ⌀40 mm must also be drilled in order to (partially) stow the counterpart there (see drawing) (for further details see
  assembly drawing
  )

Dimensions:

• Push button handle diameter (⌀D): ⌀18.8 mm (47/64″)
• Length (H): 19 mm (3/4″)

For further dimensions and details
see technical drawing
.

Manufacture:

• The high-quality push-button handles PK03BN are made of solid zinc alloy (ZDC)

Included in delivery:

• 1 piece push button handle PK03BN made of solid zinc alloy, black nickel
• 1 piece flat round head screw M3 x 20 made of steel

Manufacturer’s part numbers:

• Item ID: 100-019-955
• Item number: PK03BN
• EAN number: 4510932012256

Manufacturer: Sugatsune / LAMP® (Japan)

Usage:

High-quality solid and elegant pushlock made of ZDC for drawer, motorhome furniture, boats, private planes and much more.

The PK03CR push-button handles can be retracted into the door surface when not in use. This is particularly practical for mobile spaces such as caravans, caravans, yachts, ships and private aircraft.

The high-quality push-button handles PK03CR have an appealing natural design and are perfect for, among other things:

• Cruise ships
• Yachts
• Cabinet furniture door
• Drawer
• RV Furniture
• Boats
• Private planes

Technical details:

• Weight: 67 g
• Size: 18.8 mm (0.8″)
• Elaborately processed
• High-quality
• Ergonomic
• Stable
• Robust
• Chrome-plated
• High brand quality from Sugatsune / LAMP®.

Surface:

• Chrome-plated

Assembly:

• The fastening is done with the help of the screws included in the scope of delivery (flat round head screw M3 x 20)
• The snap handle has a mounting hole with internal thread
• For doors with a width of 15 mm (19/32″) to 25 mm (63/64″), only one hole with a diameter of ⌀25 mm (63/64″) needs to be drilled
• For doors with a door thickness of 26 mm (1-1/32″) to 35 mm (1-3/8″), a partial hole with a diameter of ⌀40 mm must also be drilled in order to (partially) stow the counterpart there (see drawing) (for further details see
  assembly drawing
  )

Dimensions:

• Push button handle diameter (⌀D): ⌀18.8 mm (47/64″)
• Length (H): 19 mm (3/4″)

For further dimensions and details
see technical drawing
.

Manufacture:

• The high-quality push-button handles PK03CR are made of solid zinc alloy (ZDC)

Included in delivery:

• 1 piece push button handle PK03CR made of solid zinc alloy, chrome-plated
• 1 piece flat round head screw M3 x 20 made of steel

Manufacturer’s part numbers:

• Item identification number: 100-019-956
• Item number: PK03CR
• EAN number: 4510932012249

Manufacturer: Sugatsune / LAMP® (Japan)

Usage:

High-quality solid and elegant pushlock made of ZDC for drawer, motorhome furniture, boats, private planes and much more.

The PK03GA push-button handles can be recessed into the door surface when not in use. This is particularly practical for mobile spaces such as caravans, caravans, yachts, ships and private aircraft.

The high-quality furniture handles PK03GA have an appealing natural design and are perfect for, among other things:

• Cruise ships
• Yachts
• Cabinet furniture door
• Drawer
• RV Furniture
• Boats
• Private planes

Technical details:

• Weight: 67 g
• Size: 18.8 mm (0.8″)
• Elaborately processed
• High-quality
• Ergonomic
• Stable
• Robust
• Gold-coloured, shiny polished
• High brand quality from Sugatsune / LAMP®.

Surface:

• Gold-coloured, shiny polished

Assembly:

• The fastening is done with the help of the screws included in the scope of delivery (flat round head screw M3 x 20)
• The snap handle has a mounting hole with internal thread
• For doors with a width of 15 mm (19/32″) to 25 mm (63/64″), only a hole with a diameter of ⌀28 mm (1.11″) must be drilled
• For doors with a door thickness of 26 mm (1-1/32″) to 35 mm (1-3/8″), a partial hole with a diameter of ⌀40 mm must also be drilled in order to (partially) stow the counterpart there (see drawing) (for further details see
  assembly drawing
  )

Dimensions:

• Push button handle diameter (⌀D): ⌀18.8 mm (47/64″)
• Length (H): 19 mm (3/4″)

For further dimensions and details
see technical drawing
.

Manufacture:

• The high-quality push-button handles PK03GA are made of solid zinc alloy (ZDC)

Included in delivery:

• 1 piece push button handle PK03GA made of solid zinc alloy, gold-colored, shiny polished
• 1 piece flat round head screw M3 x 20 made of steel

Manufacturer’s part numbers:

• Item ID: 100-019-954
• Item number: PK03GA
• EAN number: 4510932012232

Manufacturer: Sugatsune / LAMP® (Japan)