Application:

Screw-in nut for furniture, wood board, chipboard, table and much more.

The 8028005 M6 x 10 mm screw-in sockets serve as thread adapters to install metric thread M6 in wooden panels, furniture, chipboard, tables, worktops.

The robust Hex threaded bushing 8028005 is perfect for invisible screwing and particularly stable fastening of furniture, benches and wooden components. The screw-in nut 8028005 has a cover edge for flush sinking into the wood without a gap.

The screw-in socket 8028005 has a self-tapping external thread ⌀8 mm for wood and an inner metric thread M6 into which metric screws or a threaded rod can be screwed, which allows a perfect multiple stable wood connection.

The advantage of the screw-in nut 8028005 over a direct connection is that when using the screw-in nut, you can disassemble and reassemble the piece of furniture several times without making the connection any less stable.

Especially with soft wood, the screw-in nuts 8028005 have a great advantage over wood connection with wood screws.

This is achieved by screwing the screw-in sleeve into the wooden panel of the piece of furniture 8028005 only once with the external thread ⌀8 mm and remaining there permanently. The furniture parts are then connected with the usual M6 screws, which are screwed directly to the screw-in sleeves.

The high-quality screw-in sleeves 8028005 have a simple and robust design and are perfect for, among other things:

• Chair
• Worktop
• Wooden bench
• Wooden cabinet
• Furniture
• Wooden panel
• Chipboard
• Table

Technical details:

• Weight: 1.95 g
• Size: 10 mm (25/64″)
• Female thread: 6 mm (15/64″)
• Male thread: 9.5 mm (3/8″)
• Hex socket: 6 mm (15/64″)
• with drop-down edge for flush sinking into the wood
• Suitable for repeated disassembly and assembly without wearing out the screw connection
• galvanized
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• The screw-in sleeves 8028005 must be screwed in at right angles to the wooden panel
• The screw-in nut is screwed in with an Allen key
• For the screw-in nut, a hole must be drilled in the wooden wall with a diameter of ⌀8 mm (5/16″) and a depth of 11 mm (7/16″) (for more details, see
  assembly drawing
  )

Dimensions:

• Screw-in nut length: 10 mm (25/64″)
• Female thread diameter: ⌀6 mm (15/64″)
• Male thread diameter: ⌀9.5 mm (3/8″)
• Lowering crane depth: 2 mm (5/64″)

For more dimensions and details, see technical drawing.

Material:

• The 8028005 screw-in sleeves are made of solid die-cast zinc

Included in delivery:

• 20 pieces screw-in socket 8028005 made of solid zinc die-casting, galvanised

Manufacturer’s part numbers:

• Item ID: 8028005
• EAN number: 8432393119762

Manufacturer: EMUCA

Application:

Screw-in nut for furniture, wood board, chipboard, table and much more.

The 8028001 M6 x 10 mm screw-in sleeves serve as thread adapters to install metric thread M6 in wooden panels, furniture, chipboard, tables, worktops.

The robust Hex threaded bushing 8028001 is perfect for invisible screwing and particularly stable fastening of furniture, benches and wooden components. The screw-in nut 8028001 has a cover edge for flush sinking into the wood without a gap.

The screw-in socket 8028001 has a self-tapping external thread ⌀8 mm for wood and an inner metric thread M6 into which metric screws or a threaded rod can be screwed, which enables a perfect, stable wood connection several times.

The advantage of the screw-in nut 8028001 over a direct connection is that when using a screw-in nut, you can disassemble and reassemble the piece of furniture several times without making the connection less stable.

Especially with soft wood, the screw-in nuts 8028001 have a great advantage over wood joints with wood screws.

This is achieved by screwing the screw-in sleeve into the wooden panel of the piece of furniture 8028001 only once with the external thread ⌀8 mm and remaining there permanently. The furniture parts are then connected with the usual M6 screws, which are screwed directly to the screw-in sleeves.

The high-quality screw-in sleeves 8028001 have a simple and robust design and are perfect for, among other things:

• Chair
• Worktop
• Wooden bench
• Wooden cabinet
• Furniture
• Wooden panel
• Chipboard
• Table

Technical details:

• Weight: 1.95 g
• Size: 10 mm (25/64″)
• Female thread: 6 mm (15/64″)
• Male thread: 9.5 mm (3/8″)
• Hex socket: 6 mm (15/64″)
• with drop-down edge for flush sinking into the wood
• natural (unprocessed)
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Natural (unprocessed)

Assembly:

• The screw-in sleeves 8028001 must be screwed in at right angles to the wooden panel
• The screw-in nut is screwed in with an Allen key
• For the screw-in nut, a hole must be drilled in the wooden wall with a diameter of ⌀8 mm (5/16″) and a depth of 11 mm (7/16″) (for more details, see
  assembly drawing
  )

Dimensions:

• Screw-in nut length: 10 mm (25/64″)
• Female thread diameter: ⌀6 mm (15/64″)
• Male thread diameter: ⌀9.5 mm (3/8″)
• Lowering crane depth: 2 mm (5/64″)

For more dimensions and details, see technical drawing.

Material:

• The 8028001 screw-in sleeves are made of solid die-cast zinc

Included in delivery:

• 20 pieces screw-in socket 8028001 made of solid die-cast zinc, natural (unprocessed)

Manufacturer’s part numbers:

• Article ID: 8028001
• EAN number: 8432393119755

Manufacturer: EMUCA

Application:

Screw-in nut for furniture, wooden board, chipboard, table and much more.

The M6 x 13 mm screw-in sleeve 8008005 s serve as thread adapters to install metric thread M6 in wooden panels, furniture, chipboard, tables, worktops.

The robust Hex threaded bushing 8008005 is perfect for invisible screwing and particularly stable fastening of furniture, benches and wooden components. The screw-in nut 8008005 has a cover edge for flush sinking into the wood without gaps.

The screw-in socket 8008005 has a self-tapping external thread ⌀8 mm for wood and an inner metric thread M6 into which metric screws or a threaded rod can be screwed, which enables a perfect, stable wood connection several times.

The advantage of the screw-in nut 8008005 over a direct connection is that when using the screw-in nut, you can disassemble and reassemble the piece of furniture several times without making the connection less stable.

Especially with soft wood, the screw-in nut 8008005 has a great advantage over wood connection with wood screws.

This is achieved by screwing the screw-in sleeve into the wooden panel of the piece of furniture 8008005 only once with the external thread ⌀8 mm and remaining there permanently. The furniture parts are then connected with the usual M6 screws, which are screwed directly to the screw-in sleeve.

Ideal for repeated assembly and disassembly, e.g. on furniture, exhibition stands, prototypes or repairs.

The high-quality screw-in joints 8008005 have a simple and robust design and are perfect for, among other things:

• Chair
• Worktop
• Wooden bench
• Wooden cabinet
• Furniture
• Wooden panel
• Chipboard
• Table

Technical details:

• Weight: 2.69 g
• Size: 13 mm (33/64″)
• Female thread: 6 mm (15/64″)
• Male thread: 8 mm (5/16″)
• Hex socket: 6 mm (15/64″)
• with drop-down edge for flush sinking into the wood
• galvanized
• Screwing in with 6 mm hexagon socket – fits common Allen keys
• Zamak (zinc die-casting)
• Cover edge 2 mm deep for flush finish without tears on the surface
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• The screw-in sleeves 8008005 must be screwed in at right angles to the wooden panel
• The screw-in nut is screwed in with an Allen key
• For the screw-in nut, a hole must be drilled in the wooden wall with a diameter of ⌀8 mm (5/16″) and a depth of 14 mm (35/64″) (for more details, see
  assembly drawing
  )

Dimensions:

• Screw-in nut length: 13 mm (33/64″)
• Female thread diameter: ⌀6 mm (15/64″)
• Male thread diameter: ⌀8 mm (5/16″)
• Lowering crane depth: 2 mm (5/64″)

For more dimensions and details, see technical drawing.

Material:

• The 8008005 screw-in sleeves are made of solid die-cast zinc

Included in delivery:

• 20 screw-in sockets 8008005 made of solid die-cast zinc, galvanised

Manufacturer’s part numbers:

• Article ID: 8008005
• EAN number: 8432393119267

Manufacturer: EMUCA

Application:

Screw-in nut for furniture, wooden board, chipboard, table and much more.

The M6 x 13 mm screw-in sleeve 8008001 s serve as thread adapters to install metric thread M6 in wooden panels, furniture, chipboard, tables, worktops.

The robust Hex threaded bushing 8008001 is perfect for invisible screwing and particularly stable fastening of furniture, benches and wooden components. The screw-in nut 8008001 has a cover edge for flush sinking into the wood without gaps.

The screw-in socket 8008001 has a self-tapping external thread ⌀8 mm for wood and an inner metric thread M6 into which metric screws or a threaded rod can be screwed, which enables a perfect, stable wood connection several times.

The advantage of the screw-in nut 8008001 over a direct connection is that when using a screw-in nut, you can disassemble and reassemble the piece of furniture several times without making the connection less stable.

Especially for soft wood, the screw-in nuts 8008001 have a great advantage over wood joints with wood screws.

This is achieved by screwing the screw-in sleeve into the wooden top of the piece of furniture 8008001 only once with the external thread ⌀8 mm and remaining there permanently. The furniture parts are then connected with the usual M6 screws, which are screwed directly to the screw-in sleeves.

The high-quality screw-in joints 8008001 have a simple and robust design and are perfect for, among other things:

• Chair
• Worktop
• Wooden bench
• Wooden cabinet
• Furniture
• Wooden panel
• Chipboard
• Table

Technical details:

• Weight: 2.7g
• Size: 13 mm (33/64″)
• Female thread: M6
• Male thread: 8 mm (5/16″)
• Hex socket: 6 mm (15/64″)
• with drop-down edge for flush sinking into the wood
• natural (unprocessed)
• Suitable for repeated assembly/disassembly without tearing out the wood hole
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Natural (unprocessed)

Assembly:

• The screw-in sleeves 8008001 must be screwed in at right angles to the wooden panel
• The screw-in nut is screwed in with an Allen key
• For the screw-in nut, a hole must be drilled in the wooden wall with a diameter of ⌀8 mm (5/16″) and a depth of 14 mm (35/64″) (for more details, see
  assembly drawing
  )

Dimensions:

• Screw-in nut length: 13 mm (33/64″)
• Female thread diameter: M6
• Male thread diameter: ⌀8 mm (5/16″)
• Lowering crane depth: 2 mm (5/64″)

For more dimensions and details
, see technical drawing.

Material:

• The screw-in sleeves 8008001 are made of solid die-cast zinc

Included in delivery:

• 20 pieces screw-in socket 8008001 made of solid die-cast zinc, natural (unprocessed)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 8008001
• EAN number: 8432393119250

Manufacturer: EMUCA

Application:

Screw-in nut for furniture, wood board, chipboard, table and much more.

The M6 x 17 mm screw-in socket 8007705 s serve as thread adapters to install metric thread M6 in wooden panels, furniture, chipboard, tables, worktops.

The robust Hex threaded bushing 8007705 is perfect for invisible screwing and particularly stable fastening of furniture, benches and wooden components. The screw-in nut 8007705 has a cover edge for flush sinking into the wood without a gap.

The screw-in socket 8007705 has a self-tapping external thread ⌀8 mm for wood and an inner metric thread M6 into which metric screws or a threaded rod can be screwed, which enables a perfect, stable wood connection several times.

The advantage of the screw-in nut 8007705 over a direct connection is that when using the screw-in nut, you can disassemble and reassemble the piece of furniture several times without making the connection less stable.

Especially for soft wood, the screw-in nut 8007705 has a great advantage over wood connection with wood screws.

This is achieved by screwing the screw-in sleeve into the wooden top of the piece of furniture 8007705 only once with the external thread ⌀8 mm and remaining there permanently. The furniture parts are then connected with the usual M6 screws, which are screwed directly to the screw-in sleeves.

Ideal for inserting durable M6 threads into wood and wood-based materials, e.g. for releasable furniture connections or accommodating furniture feet.

The high-quality screw-in sleeves 8007705 have a simple and robust design and are perfect for, among other things:

• Chair
• Worktop
• Wooden bench
• Wooden cabinet
• Furniture
• Wooden panel
• Chipboard
• Table

Technical details:

• Weight: 2.76 g
• Size: 17 mm (43/64″)
• Female thread: M6 (15/64″)
• Male thread: 8 mm (5/16″)
• Hex socket: 6 mm (15/64″)
• with drop-down edge for flush sinking into the wood
• galvanized
• Reusable connection, suitable for multiple assembly and disassembly
• Zamak. Zinc die casting
• Suitable for solid wood and wood-based materials
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• The screw-in sleeves 8007705 must be screwed in at right angles to the wooden panel
• The screw-in nut is screwed in with an Allen key
• For the screw-in nut, a hole with a diameter of ⌀8 mm (5/16″) must be drilled in the wooden wall (for more details, see
  assembly drawing
  )

Dimensions:

• Screw-in nut length: 17 mm (43/64″)
• Female thread diameter: M6 (15/64″)
• Male thread diameter: ⌀8 mm (5/16″)
• Lowering crane depth: 2 mm (5/64″)

For more dimensions and details
, see technical drawing.

Material:

• The screw-in sleeves 8007705 are made of solid die-cast zinc

Included in delivery:

• 20 pieces screw-in socket 8007705 made of solid die-cast zinc, galvanised
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 8007705
• EAN number: 8432393119243

Manufacturer: EMUCA

Application:

Screw-in nut for furniture, wood board, chipboard, table and much more.

The 8007605 M8 x 15 mm screw-in sleeves serve as thread adapters to install metric thread M8 in wooden panels, furniture, chipboard, tables, worktops.

The robust Hex threaded bushing 8007605 is perfect for invisible screwing and particularly stable fastening of furniture, benches and wooden components. The screw-in nut 8007605 has a cover edge for flush sinking into the wood without gaps.

The screw-in socket 8007605 has a self-tapping external thread ⌀10 mm for wood and an inner metric thread M8 into which metric screws or a threaded rod can be screwed, which enables a perfect, stable wood connection several times.

The advantage of the screw-in nut 8007605 over a direct connection is that when using screw-in nuts, you can disassemble and reassemble the piece of furniture several times without making the connection less stable.

Especially with soft wood, the screw-in nut 8007605 has a great advantage over wood connection with wood screws.

This is achieved by screwing the screw-in sleeve into the wooden top of the piece of furniture 8007605 only once with the external thread ⌀10 mm and remaining there permanently. The furniture parts are then connected with the usual M8 screws, which are screwed directly to the screw-in sleeves.

The high-quality screw-in sleeves 8007605 have a simple and robust design and are perfect for, among other things:

• Chair
• Worktop
• Wooden bench
• Wooden cabinet
• Furniture
• Wooden panel
• Chipboard
• Table

Technical details:

• Weight: 3.7 g
• Size: 15 mm (19/32″)
• Female thread: M8 (5/16″)
• Male thread: 10 mm (25/64″)
• Hexagon socket: 8 mm (5/16″)
• with drop-down edge for flush sinking into the wood
• galvanized
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• The screw-in sleeves 8007605 must be screwed in at right angles to the wooden panel
• The screw-in nut is screwed in with an Allen key
• For the screw-in nut, a hole with a diameter of ⌀10 mm (25/64″) must be drilled in the wooden wall (for further details, see
  assembly drawing
  )

Dimensions:

• Screw-in nut length: 15 mm (19/32″)
• Female thread diameter: M8 (5/16″)
• Male thread diameter: ⌀10 mm (25/64″)
• Lowering crane depth: 2 mm (5/64″)

For more dimensions and details
, see technical drawing.

Material:

• The screw-in sleeves 8007605 are made of solid die-cast zinc

Included in delivery:

• 20 pieces screw-in socket 8007605 made of solid zinc die-casting, galvanised
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 8007605
• EAN number: 8432393119229

Manufacturer: EMUCA

Application:

Screw-in nut for furniture, wooden board, chipboard, table, chair, countertop and much more.

The 8007601 M8 x 15 mm screw-in sleeves serve as thread adapters to install metric thread M8 in wooden panels, furniture, chipboard, tables, worktops.

The robust Hex threaded bushing 8007601 is perfect for invisible screwing and particularly stable fastening of furniture, benches and wooden components. The screw-in nut 8007601 has a cover edge for flush sinking into the wood without gaps.

The screw-in socket 8007601 has a self-tapping external thread ⌀10 mm for wood and an inner metric thread M8 into which metric screws or a threaded rod can be screwed, which enables a perfect, stable wood connection several times.

The advantage of the screw-in nut 8007601 over a direct connection is that when using screw-in nuts, you can disassemble and reassemble the piece of furniture several times without making the connection less stable.

Especially with soft wood, the screw-in nuts 8007601 have a great advantage over wood joints with wood screws.

This is achieved by screwing the screw-in sleeve into the wooden panel of the piece of furniture 8007601 only once with the external thread ⌀10 mm and remaining there permanently. The furniture parts are then connected with the usual M8 screws, which are screwed directly to the screw-in sleeves.

Ideal for fastening furniture legs, table frames or other fittings with M8 screws permanently and at the same time detachable.

The high-quality screw-in sleeves 8007601 have a simple and robust design and are perfect for, among other things:

• Wooden bench
• Wooden cabinet
• Furniture
• Wooden panel
• Chipboard
• Table
• Chair
• Worktop

Technical details:

• Weight: 3.65 g
• Size: 15 mm (19/32″)
• Female thread: 8 mm (5/16″)
• Male thread: 10 mm (25/64″)
• Hexagon socket: 8 mm (5/16″)
• with drop-down edge for flush sinking into the wood
• natural
• Self-tapping external thread for reliable grip in soft and medium-hard wood species
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Natural

Assembly:

• The screw-in sleeves 8007601 must be screwed in at right angles to the wooden panel
• The screw-in nut is screwed in with an Allen key
• For the screw-in nut, a hole with a diameter of ⌀10 mm (25/64″) must be drilled in the wooden wall (for further details, see
  assembly drawing
  )

Dimensions:

• Screw-in nut length: 15 mm (19/32″)
• Female thread diameter: ⌀8 mm (5/16″)
• Male thread diameter: ⌀10 mm (25/64″)
• Lowering crane depth: 2 mm (5/64″)

For more dimensions and details
, see technical drawing.

Material:

• The screw-in sleeves 8007601 are made of solid die-cast zinc

Included in delivery:

• 20 pieces screw-in socket 8007601 made of solid die-cast zinc, natural
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 8007601
• EAN number: 8432393119212

Manufacturer: EMUCA

Application:

Practical cross-threaded nut for furniture assembly, shelf construction, bed connection, cabinet construction and much more.

The practical cross-threaded nut 6170105 is a cylindrical fastener for the production of stable cross-joints in wooden and furniture constructions.

It is made of steel, is cylindrical on the outside with a diameter of 10 mm and has a central M6 internal thread.

The overall length is 14 mm (35/64″), which makes it suitable for standard material thicknesses.

Due to the slot incorporated on the side, the cross dowel with M6 thread can be aligned with the help of a screwdriver.

The cylinder nut 6170105 is inserted into a bore at right angles to the direction in which the screw is screwed.

In combination with a threaded screw, it creates a highly resilient, dismountable connection.

The transverse thread nut 6170105 is particularly suitable for furniture construction, shelving systems and dismountable constructions.

The surface is galvanized and thus offers corrosion protection under normal loads.

The cross anchor with M6 thread 6170105 is easy to install and ensures precise, detachable connections.

It is compatible with common drilling dimensions and connection systems in furniture construction.

The high-quality cylinder nuts 6170105 are perfect for, among other things:

• Timber frame connection
• Transport furniture
• Exhibition
• Enclosure mounting
• Shopfitting
• modular furniture connection
• Furniture assembly
• Shelving
• Bed connection
• Cabinet construction

Technical details:

• Weight: 6.35 g
• Size: 14 mm (35/64″)
• with M6 thread
• Easy installation, practical, stable
• Steel
• Cylindrical shape
• Female thread M6
• Slot for alignment with screwdriver
• High tensile and holding strength
• Detachable again and suitable for disassembly
• Compatible with standard drilling dimensions
• Suitable for wood, chipboard and MDF
• Easy installation without special tools
• galvanized
• Steel
• robust
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• First, drill a longitudinal hole with a diameter of ⌀6 mm (15/64″) in the first component (e.g. a side wall) for an M6 screw and a depth of 30–40 mm, depending on the screw length
• In the second component (e.g. a cross brace) a cross hole with a diameter of approx. ⌀10.1 mm (25/64″) and a depth of 15–16 mm is drilled, in the middle of the material thickness
• Then insert the Ø10 × 14 mm cross dowel with M6 internal thread into the cross hole
• Using a flat-head screwdriver, the cross dowel is aligned so that the internal thread is perpendicular to the screw-in direction
• Now insert an M6 screw through the longitudinal hole of the first component and screw it into the cross dowel
• By tightening the screw, both components are connected stably and flush with each other; the cross dowel 6170105 must sit firmly and must not rotate with it

Dimensions:

• Cylinder nut length: 14 mm (35/64″)
• Outer Diameter: ⌀10 mm (25/64″)

For more dimensions and details, see technical drawing.

Material:

• The cylinder nuts 6170105 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 20 pieces cross anchors with M6 thread 6170105 made of robust steel, galvanized

Manufacturer’s part numbers:

• Article ID: 6170105
• EAN number: 8432393115108

Manufacturer: EMUCA

Application:

Practical spread-threaded insert for wooden parts, furniture joints and much more.

The compact expansion sleeve 8008202 made of high-quality brass has been specially developed for stable screw connections in wood.

With an outer diameter of 9.2 mm (23/64″) and a length of 12 mm (15/32″), it is perfect for precise applications in furniture making, interior design or model making.

When an M6 screw is screwed in, the socket spreads in the prepared drill hole and anchors itself securely in the material.

The robust brass ensures high pull-out strength and durability – even with repeated use.

Advantages:
– Quick and safe assembly
– No damage to the workpiece due to external threads
– Ideal for removable furniture connections

This expansion sleeve is the perfect choice for all those who rely on reliable, detachable connections in the wood.

The expansion sleeves are also suitable for repairs or retrofits on existing furniture.

The high-quality expansion joints 8008202 are perfect for, among other things:

• Dazzle
• Achieve
• Wooden structures
• Wooden case
• DIY project with wooden panels
• Home improvement project
• Wood
• Furniture Connections

Technical details:

• Weight: 2.48 g
• Size: 12 mm (15/32″)
• Easy installation, practical, stable
• Female thread: M6
• The socket is available in three thread variants: M4 and M6
• Suitable for solid wood and wood-based materials
• No turning thanks to spreading mechanism
• Corrosion-resistant and durable
• Easy processing without special tools
• Ideal for furniture making, wood joints and repairs
• Brass
• massive
• robust
• high brand quality from UMAXO®

Surface:

• Brass
• The brass surface gives parts, components and furniture fittings a classy, timeless look that goes well with classic and modern designs
• It has a warm vibe that enhances spaces and gives a sense of luxury
• In addition, the colour nuance can be combined in a variety of ways with other materials such as wood or glass

Assembly:

• The expansion sleeve with internal thread M6 is designed for pressing into a drill hole
• The expansion sleeves are inserted into a pre-drilled hole, with self-anchoring by spreading when screwed in
• For optimal grip, we recommend a drill diameter of 8.0 to 8.2 mm – depending on the type of wood
• The drilling depth should be 12 mm (15/32″) (see assembly drawing for more details)

Dimensions:

• Expansion sleeve length: 12 mm (15/32″)
• Outer Diameter: ⌀9.2 mm (23/64″)
• Female thread: M6

For more dimensions and details, see technical drawing.

Material:

• The expansion sleeves 8008202 are made of solid and robust brass
• Brass components, fasteners and furniture fittings are particularly durable and corrosion-resistant, making them ideal for long-term use
• They offer an elegant, timeless look that is equally appealing in classic and modern interior styles
• In addition, brass is ideal for hygienic applications due to its antibacterial properties

Included in delivery:

• 20 pieces expansion sleeve with internal thread M6 8008202 made of solid and robust brass, brass

Manufacturer’s part numbers:

• Article ID: 8008202
• EAN number: 8432393119274

Manufacturer: EMUCA

Application:

Practical spread-threaded insert for wooden parts, furniture joints and much more.

The compact expansion sleeve 9003402 made of high-quality brass was specially developed for stable screw connections in wood.

With an outer diameter of 5.5 mm (7/32″) and a length of 7.5 mm (19/64″), it is perfect for precise applications in furniture making, interior design or model making.

When an M4 screw is screwed in, the socket spreads in the prepared drill hole and anchors itself securely in the material.

The robust brass ensures high pull-out strength and durability – even with repeated use.

Advantages:
– Quick and safe assembly
– No damage to the workpiece due to external threads

– Ideal for removable furniture connections- Rust protection due to zinc
plating- Flange prevents slipping into the material

This expansion sleeve is the perfect choice for all those who rely on reliable, detachable connections in the wood.

The expansion sleeves are also suitable for repairs or retrofits on existing furniture.

The high-quality expansion sleeves 9003402 are perfect for, among other things:

• Dazzle
• Achieve
• Wooden structures
• Wooden case
• DIY project with wooden panels
• Home improvement project
• Wood
• Furniture Connections

Technical details:

• Weight: 1 g
• Size: 7.5 mm (19/64″)
• Easy installation, practical, stable
• Female thread: M4
• The socket is available in three thread variants: M4 and M6
• Suitable for solid wood and wood-based materials
• No turning thanks to spreading mechanism
• Corrosion-resistant and durable
• Easy processing without special tools
• Ideal for furniture making, wood joints and repairs
• Brass
• massive
• robust
• high brand quality from UMAXO®

Surface:

• Brass
• The brass surface gives parts, components and furniture fittings a classy, timeless look that goes well with classic and modern designs
• It has a warm vibe that enhances spaces and gives a sense of luxury
• In addition, the colour nuance can be combined in a variety of ways with other materials such as wood or glass

Assembly:

• The expansion socket with internal thread M4 is designed for pressing into a drill hole
• The expansion sleeves are inserted into a pre-drilled hole, with self-anchoring by spreading when screwed in
• For optimal grip, we recommend a drill diameter of 5.0 to 5.2 mm – depending on the type of wood
• The drilling depth should be 7.5 mm (19/64″) (see assembly drawing for more details)

Dimensions:

• Length of expansion sleeve: 7.5 mm (19/64″)
• Outer Diameter: ⌀5.5 mm (7/32″)
• Female thread: M4

For more dimensions and details, see technical drawing.

Material:

• The expansion sleeves 9003402 are made of solid and robust brass
• Brass components, fasteners and furniture fittings are particularly durable and corrosion-resistant, making them ideal for long-term use
• They offer an elegant, timeless look that is equally appealing in classic and modern interior styles
• In addition, brass is ideal for hygienic applications due to its antibacterial properties

Included in delivery:

• 20 pieces expansion sleeve with internal thread M4 9003402 made of solid and robust brass, brass

Manufacturer’s part numbers:

• Article ID: 9003402
• EAN number: 8432393123714

Manufacturer: EMUCA