Application:

Robust flat hinge for machine doors, maintenance hatches and much more.

The B-1059-5 (10661) screw-on hinge connects doors or hatches to a body or frame, allowing for easy, permanent rotational movement.

The flat design is particularly suitable for screw-on applications on housings, machine covers and cabinets.

SUS304 stainless steel offers good corrosion resistance, making the hinge suitable for humid or more demanding environments.

The polished surface ensures a clean, high-quality look and makes cleaning easier.

4 countersunk holes enable stable fastening, whereby the screw heads can be largely flush with the hinge blades.

When using two hinges vertically, the reference door weight is up to 4.5 kg (10 lbs) for a door size of 500 mm (19-11/16″) x 250 mm (9-27/32″).

The high-quality flat hinges B-1059-5 are perfect for, among other things:

• Enclosure doors
• Machine covers
• Stainless steel housing
• Control cabinets
• Device flaps
• Cabinet doors
• Machine doors
• Maintenance hatches

Technical details:

• Weight: 8 g (for 2 pieces: 16 g)
• Load capacity (load capacity): 4.5 kg (10 lbs) – for 2 pieces
• Size: 38 mm (1-1/2″)
• Available in 5 sizes: 38 mm, 51 mm, 64 mm, 76 mm and 89 mm
• Easy installation, stable
• Material thickness 0.8 mm (1/32″)
• 4 recessed mounting holes
• Mounting holes with ⌀4.5 mm
• Countersink with ⌀5.5 mm
• Hinge pin with ⌀3 mm
• Hinge roller with ⌀4.8 mm outer diameter
• Five joint segments
• Reference door for weight specification: 500 mm (19-11/16″) x 250 mm (9-27/32″)
• Suitable for different door and flap applications
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• The fastening is done with 4 x countersunk screws made of stainless steel V2A, approx. ⌀3.5 mm (not included)
• The flat hinge has 4 mounting holes with countersink
• The flat hinge is first aligned with the door or flap and frame in the desired position
• The 4 attachment points are marked according to the hole pattern and, depending on the material used, pre-drilled or threaded
• The hinge is then fastened with suitable countersunk screws
• For a visually clean installation, the screw heads should be as flush as possible in the countersinks
• Before the final tightening, it must be checked whether the door or flap can be moved freely and without bracing

Dimensions:

• Length: 38 mm (1-1/2″)
• Width: 26.5 mm (1-3/64″)
• Material thickness: 0.8 mm (1/32″)
• Pinhole size: 27 mm (1-1/16″)
• Number of joint segments: 3

For more dimensions and details , see technical drawing.

Material:

• The flat hinges B-1059-5 are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2pcs flat hinge B-1059-5 (10661) made of solid stainless steel SUS304, glossy polished, 38 mm (1-1/2″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10661
• Item number: B-1059-5

Manufacturer: TAKIGEN (Japan)

Application:

Robust flat hinge for machine doors, maintenance hatches and much more.

The B-1059-4 (10660) screw-on hinge connects doors or hatches to a body or frame, allowing for easy, permanent rotational movement.

The flat design is particularly suitable for screw-on applications on housings, machine covers and cabinets.

SUS304 stainless steel offers good corrosion resistance, making the hinge suitable for humid or more demanding environments.

The polished surface ensures a clean, high-quality look and makes cleaning easier.

4 countersunk holes enable stable fastening, whereby the screw heads can be largely flush with the hinge blades.

When using two hinges vertically, the reference door weight is up to 6.7 kg (15 lbs) for a door size of 600 mm (23-5/8″) x 300 mm (11-13/16″).

The high-quality flat hinges B-1059-4 are perfect for, among other things:

• Enclosure doors
• Machine covers
• Stainless steel housing
• Control cabinets
• Device flaps
• Cabinet doors
• Machine doors
• Maintenance hatches

Technical details:

• Weight: 15 g (for 2 pieces: 30 g)
• Load capacity (load capacity): 6.7 kg (15 lbs) – for 2 pieces
• Size: 51 mm (2-1/64″)
• Available in 5 sizes: 38 mm, 51 mm, 64 mm, 76 mm and 89 mm
• Easy installation, stable
• Material thickness 0.8 mm (1/32″)
• 4 recessed mounting holes
• Mounting holes with ⌀4.5 mm
• Countersink with ⌀5.5 mm
• Hinge pin with ⌀3 mm
• Hinge roller with ⌀4.8 mm outer diameter
• Five joint segments
• Reference door for weight specification: 600 mm (23-5/8″) x 300 mm (11-13/16″)
• Suitable for different door and flap applications
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• The fastening is done with 4 x countersunk screws made of stainless steel V2A, approx. ⌀3.5 mm (not included)
• The flat hinge has 4 mounting holes with countersink
• The flat hinge is first aligned with the door or flap and frame in the desired position
• The 4 attachment points are marked according to the hole pattern and, depending on the material used, pre-drilled or threaded
• The hinge is then fastened with suitable countersunk screws
• For a visually clean installation, the screw heads should be as flush as possible in the countersinks
• Before the final tightening, it must be checked whether the door or flap can be moved freely and without bracing

Dimensions:

• Length: 51 mm (2-1/64″)
• Width: 34.5 mm (1-23/64″)
• Material thickness: 0.8 mm (1/32″)
• Hole Pattern: 36 mm (1-27/64″)
• Number of joint segments: 5

For more dimensions and details , see technical drawing.

Material:

• The flat hinges B-1059-4 are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2pcs flat hinge B-1059-4 (10660) made of solid stainless steel SUS304, glossy polished, 51 mm (2-1/64″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10660
• Item number: B-1059-4

Manufacturer: TAKIGEN (Japan)

Application:

Shelf brackets for partitions, shelves and much more.

The SV-40M mounting brackets are made of solid 3 mm (1/8″) thick SUS304 stainless steel.

The SV-40M shelving brackets combine the high load capacity with excellent corrosion resistance.

The SV-40M shelf bracket is very stable, has an excellent load capacity of 16 kg, and a contact surface length of 40 mm (1.6″).

The compact design and the mirror-polished surface are particularly suitable for visible fastenings in high-quality furniture and interior design.

The high-quality mounting brackets SV-40M are perfect for, among other things:

• Shelf
• Yacht
• Boats
• Ships
• Forecourt
• Partition
• Shelf

Technical details:

• Weight: 58 g
• Load capacity (load capacity): 16 kg (for two pieces)
• Size: 40 mm (1-37/64″)
• Available in three sizes: 40 mm, 55 mm and 80 mm, as well as with two finishes: satin matt and glossy polished
• Easy to assemble
• Practical
• Four countersunk mounting holes ⌀1/8″ (3.3 mm) with countersunk ⌀1/4″ (6.5 mm)
• stable
• Mirror-polished surface for high-quality visible fastenings in furniture and interior design
• Material thickness: 3 mm (1/8″)
• glossy polished
• weatherproof
• rust-proof and corrosion-resistant
• high brand quality of Sugatsune / LAMP®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• Fastening is done using the screws included in the scope of delivery (countersunk screw)
• The fastening screws are also made of stainless steel
• The SV-40M mounting brackets have four mounting holes with a diameter of ⌀3.3 mm (1/8″), with countersink (for more details, see mounting drawing)

Dimensions:

• Mounting Bracket Height: 40 mm (1-37/64″)
• Width: 25 mm (63/64″)
• Depth: 40 mm (1.6″)
• Material thickness: 3.3 mm (1/8″)
• Countersink: ⌀6.5 mm (1/4″)

For more dimensions and details, see technical drawing.

Material:

• The mounting brackets SV-40M are made of solid stainless steel (SUS304, V2A)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive, polished or satin finish that is both modern and easy to maintain

Included in delivery:

• 2 mounting brackets SV-40M made of solid stainless steel, polished to a glossy finish
• 2x 4 pieces stainless steel countersunk screw

Manufacturer’s part numbers:

• Article ID: 120-030-056
• Item number: SV-40M
• EAN number: 4510932730082

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Robust flat hinge for machine doors, maintenance hatches and much more.

The B-1059-3 (10659) screw-on hinge connects doors or flaps to a body or frame and allows for easy, permanent rotational movement.

The flat design is particularly suitable for screw-on applications on housings, machine covers and cabinets.

SUS304 stainless steel offers good corrosion resistance, making the hinge suitable for humid or more demanding environments.

The polished surface ensures a clean, high-quality look and makes cleaning easier.

6 countersunk holes enable stable fastening, whereby the screw heads can be largely flush with the hinge blades.

When using two hinges vertically, the reference door weight is up to 9.7 kg (21 lbs) for a door size of 700 mm (27-9/16″) x 350 mm (13-25/32″).

The high-quality flat hinges B-1059-3 are perfect for, among other things:

• Enclosure doors
• Machine covers
• Stainless steel housing
• Control cabinets
• Device flaps
• Cabinet doors
• Machine doors
• Maintenance hatches

Technical details:

• Weight: 21 g (for 2 pieces: 42 g)
• Load capacity (load capacity): 9.7 kg (21 lbs) – for 2 pieces
• Size: 64 mm (2-33/64″)
• Available in 5 sizes: 38 mm, 51 mm, 64 mm, 76 mm and 89 mm
• Easy installation, stable
• Material thickness 0.8 mm (1/32″)
• 6 recessed mounting holes
• Mounting holes with ⌀4.5 mm
• Countersink with ⌀6 mm
• ⌀4.5 mm hinge pin
• Hinge roller with ⌀6 mm outer diameter
• Five joint segments
• Reference door for weight specification: 700 mm (27-9/16″) x 350 mm (13-25/32″)
• Suitable for different door and flap applications
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• The fastening is done with 6 x countersunk screws made of stainless steel V2A, approx. ⌀3.5 mm (not included)
• The flat hinge has 6 mounting holes with countersink
• The flat hinge is first aligned with the door or flap and frame in the desired position
• The 6 attachment points are marked according to the hole pattern and, depending on the material used, pre-drilled or threaded
• The hinge is then fastened with suitable countersunk screws
• For a visually clean installation, the screw heads should be as flush as possible in the countersinks
• Before the final tightening, it must be checked whether the door or flap can be moved freely and without bracing

Dimensions:

• Length: 64 mm (2-33/64″)
• Width: 40 mm (1-37/64″)
• Material thickness: 0.8 mm (1/32″)
• Pinhole Pattern: 48 mm (1-57/64″)
• Number of joint segments: 5

For more dimensions and details , see technical drawing.

Material:

• The flat hinges B-1059-3 are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2 pieces flat hinge B-1059-3 (10659) made of solid stainless steel SUS304, glossy polished, 64 mm (2-33/64″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10659
• Item number: B-1059-3

Manufacturer: TAKIGEN (Japan)

Application:

Robust flat hinge for machine doors, housing doors, maintenance hatches and much more.

The B-1059-2 (10658) screw-on hinge connects doors or flaps to a body or frame and allows for easy, permanent rotational movement.

The flat design is particularly suitable for screw-on applications on housings, machine covers and cabinets.

SUS304 stainless steel offers good corrosion resistance, making the hinge suitable for humid or more demanding environments.

The polished surface ensures a clean, high-quality look and makes cleaning easier.

6 countersunk holes enable stable fastening, whereby the screw heads can be largely flush with the hinge blades.

When using two hinges vertically, the reference door weight is up to 10 kg (22 lbs) for a door size of 800 mm (31-1/2″) x 400 mm (15-3/4″).

The high-quality flat hinges B-1059-2 are perfect for, among other things:

• Machine covers
• Stainless steel housing
• Control cabinets
• Device flaps
• Cabinet doors
• Machine doors
• Enclosure doors
• Maintenance hatches

Technical details:

• Weight: 40 g (for 2 pieces: 80 g)
• Load capacity (load capacity): 10 kg (22 lbs) – for 2 pieces
• Size: 76 mm (2-63/64″)
• Available in 5 sizes: 38 mm, 51 mm, 64 mm, 76 mm and 89 mm
• Easy installation, stable
• Material thickness 1 mm (3/64″)
• 6 recessed mounting holes
• Mounting holes with ⌀4.5 mm
• Countersink with ⌀6 mm
• ⌀4.5 mm hinge pin
• Hinge roller with ⌀6 mm outer diameter
• Five joint segments
• Reference door for weight specification: 800 mm (31-1/2″) x 400 mm (15-3/4″)
• Suitable for different door and flap applications
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• The fastening is done with 6 x countersunk screws made of stainless steel V2A, approx. ⌀3.5 mm (not included)
• The flat hinge has 6 mounting holes with countersink
• The flat hinge is first aligned with the door or flap and frame in the desired position
• The 6 attachment points are marked according to the hole pattern and, depending on the material used, pre-drilled or threaded
• The hinge is then fastened with suitable countersunk screws
• For a visually clean installation, the screw heads should be as flush as possible in the countersinks
• Before the final tightening, it must be checked whether the door or flap can be moved freely and without bracing

Dimensions:

• Length: 76 mm (2-63/64″)
• Width: 45.5 mm (1-51/64″)
• Material thickness: 1 mm (3/64″)
• Hole Pattern: 56 mm (2-13/64″)
• Number of joint segments: 5

For more dimensions and details , see technical drawing.

Material:

• The flat hinges B-1059-2 are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2pcs flat hinge B-1059-2 (10658) made of solid stainless steel SUS304, glossy polished, 76 mm (2-63/64″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10658
• Item number: B-1059-2

Manufacturer: TAKIGEN (Japan)

Application:

Robust flat hinge for machine doors, housing doors, maintenance hatches and much more.

The B-1059-1 (10657) screw-on hinge connects doors or flaps to a body or frame and allows for easy, permanent rotational movement.

The flat design is particularly suitable for screw-on applications on housings, machine covers and cabinets.

SUS304 stainless steel offers good corrosion resistance, making the hinge suitable for humid or more demanding environments.

The polished surface ensures a clean, high-quality look and makes cleaning easier.

6 countersunk holes enable stable fastening, whereby the screw heads can be largely flush with the hinge blades.

When using two hinges vertically, the reference door weight is up to 13 kg for a door size of 1000 x 500 mm.

The high-quality flat hinges B-1059-1 are perfect for, among other things:

• Machine covers
• Stainless steel housing
• Control cabinets
• Device flaps
• Cabinet doors
• Machine doors
• Enclosure doors
• Maintenance hatches

Technical details:

• Weight: 70 g (for 2 pieces: 140 g)
• Load capacity (load capacity): 13 kg (29 lbs) – for 2 pieces
• Size: 89 mm (3-1/2″)
• Available in 5 sizes: 38 mm, 51 mm, 64 mm, 76 mm and 89 mm
• Easy installation, stable
• Material thickness 1.2 mm (3/64″)
• Six recessed mounting holes
• Mounting holes with ⌀5 mm
• Countersink with ⌀7 mm
• ⌀5 mm hinge pin
• Hinge roller with ⌀7.5 mm outer diameter
• Five joint segments
• Reference door for weight specification: 1000 mm (39-3/8″) x 500 mm (19-11/16″)
• Suitable for different door and flap applications
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• The fastening is done with 6 x countersunk screws made of stainless steel V2A, approx. ⌀3.5 mm (not included)
• The flat hinge has 6 mounting holes with countersink
• The flat hinge is first aligned with the door or flap and frame in the desired position
• The 6 attachment points are marked according to the hole pattern and, depending on the material used, pre-drilled or threaded
• The hinge is then fastened with suitable countersunk screws
• For a visually clean installation, the screw heads should be as flush as possible in the countersinks
• Before the final tightening, it must be checked whether the door or flap can be moved freely and without bracing

Dimensions:

• Length: 89 mm (3-1/2″)
• Width: 56 mm (2-13/64″)
• Material thickness: 1.2 mm (3/64″)
• Hole Pattern: 69 mm (2-23/32″)
• Number of joint segments: 5

For more dimensions and details , see technical drawing.

Material:

• The flat hinges B-1059-1 are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2pcs flat hinge B-1059-1 (10657) made of solid stainless steel SUS304, glossy polished, 89 mm (3-1/2″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10657
• Item number: B-1059-1

Manufacturer: TAKIGEN (Japan)

Application:

Robust marine hinge for ship hatches, deck hatches, floor flaps, maintenance hatches and much more.

The marine hinge B-1013 (13343) is used for the movable connection of hatches, flaps and covers, especially in shipbuilding and in areas at risk of corrosion.

Due to its design with two rotation axes, the hinge allows a large opening angle of up to 180°.

The special joint geometry ensures that the flap can move around the adjacent edge in a controlled manner when opened.

The robust SUS316 stainless steel offers very good corrosion resistance and is therefore particularly suitable for applications with humidity and saline environments.

The flat design with only a few protruding parts reduces annoying protrusions and also allows use on floor flaps.

The four countersunk holes allow for a stable bolting to the flap and frame, making the B-1013 a rugged solution for demanding flap and hatch applications.

The high-quality marine hinges B-1013 are perfect for, among other things:

• Cover hoods
• Fairing flaps
• Ship hatches
• Deck hatches
• Bottom flaps
• Maintenance hatches

Technical details:

• Weight: 70 g (for 2 pieces: 140 g)
• Size: 70 mm (2-3/4″)
• Easy installation, stable
• Two-axis joint design
• Beam angle up to 180°
• Made of corrosion-resistant SUS316 stainless steel
• Particularly suitable for the marine sector
• Flat and compact design
• Only small protrusions on the surface
• Designed for M5 countersunk screws
• Can be used for right and left
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• Fastening is done with 4 x M5 countersunk screws (not included)
• The hatch hinge B-1013 (13343) has four mounting holes with countersink
• First of all, the positions of the two-axis hinge on the flap and frame must be determined and the four mounting holes must be prepared according to the hole pattern
• Hole spacing is 2-13/64″ (56 mm) horizontally and 1-1/32″ (26 mm) vertically
• The hinge is then positioned so that the two articulated axes can move freely and the flap does not collide with the frame when opened
• The marine hinge B-1013 is then fastened with four M5 countersunk screws
• The screw length is to be selected according to the material thickness of the flap or frame
• Finally, the flap must be moved up to 180° over the entire opening area and checked for free, stress-free function

Dimensions:

• Overall width: 70 mm (2-3/4″)
• Overall height: 40 mm (1-37/64″)
• Plate thickness: 4 mm (5/32″)
• Hole spacing horizontal: 56 mm (2-13/64″)
• Hole spacing vertical: 26 mm (1-1/32″)
• Mounting holes: 4 x ⌀6.5 mm
• Mounting Hole Lowering: ⌀10 mm (25/64″)

For more dimensions and details , see technical drawing.

Material:

• The marine hinges B-1013 are made of high-quality stainless steel SUS316 (1.4401 or V4A)
• SUS316 stainless steel (also known as V4A) is a stainless steel with excellent corrosion resistance
• Due to their resistance to chlorine-containing substances, fittings made of SUS316 stainless steel are used for use near the coast and are expressly recommended

Included in delivery:

• 2 pieces marine hinge B-1013 (13343) made of high quality stainless steel SUS316, glossy polished, 70 mm (2-3/4″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 13343
• Item number: B-1013

Manufacturer: TAKIGEN (Japan)

Application:

Screw-on plate, for furniture feet, furniture castors, machine feet, cabinet legs, sofa feet and much more.

The AP36-M12 top plate is used to fasten furniture feet, leveling feet, etc. under furniture, sofas, appliances, machines, etc.

Also suitable for replacing defective furniture feet, furniture castors or sofa feet.

The glossy polished surface gives the mounting plate a high-quality look, while the stainless steel V2A ensures good corrosion resistance.

The high-quality mounting plates 200-140-504 are perfect for:

• Feet
• Leveling feet
• Cabinet castors
• Articulated feet
• Legs
• Adjustable feet
• Containers
• Furniture feet
• Furniture castors
• Machine feet
• Cabinet legs
• Sofa legs

Technical details:

• Weight: 19 g
• Diameter: ⌀36 mm (1-27/64″)
• threaded M12
• round
• with three mounting holes
• robust
• stable
• glossy polished
• weatherproof
• Stainless (corrosion-free)
• high brand quality of Sugatsune / LAMP®

Surface:

• Glossy polished

Assembly:

• The screw-on plate has three mounting holes with a diameter of ⌀4.2 mm (11/64″) and is attached to the lower surface of the piece of furniture with three screws (not included)
• The furniture feet or furniture castors, which are equipped with a screw, are then screwed into the thread of the AP36-M12 mounting plate and tightened

Dimensions:

• Mounting plate diameter: ⌀36 mm (1-27/64″)
• Height: 11.5 mm (29/64″)
• Thread: M12
• Mounting hole diameter: ⌀4.2 mm (11/64″)
• Threaded nut diameter: ⌀13.9 mm (35/64″)

For more dimensions and details, see technical drawing.

Material:

• The AP36-M12 mounting plates are made of stainless steel (V2A)

Included in delivery:

• 4 pieces AP36-M12 mounting plate made of stainless steel, glossy polished

Manufacturer’s part numbers:

• Article ID: 200-140-504
• Item number: AP36-M12
• EAN Number: 4510932005111

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Design hooks for coat racks, hotels, restaurants and much more.

The PXB-UM05-101-Q1-GL wall hooks are made of a sturdy aluminum alloy.

The PXB-UM05-101-Q1-GL universal hook has a load capacity of 10 kg and a 39 mm (1-17/32″) hook tip and is suitable for hanging various objects.

The edges of the hook are beveled for more safety.

The filigree lattice ornament of the Urban Metal Quest series combines modern geometry with a classic appearance and gives the coat hook a particularly elegant look.

The high-quality wall hooks PXB-UM05-101-Q1-GL have a modern design and are perfect for, among other things:

• Entrance
• Bedroom
• Living room
• Cloakroom
• Hotel
• Restaurant

Technical details:

• Weight: 114 g
• Load capacity (load capacity): 10 kg
• Size: 69.6 mm (2-47/64″)
• Material thickness: 24 mm (15/16″) x 7 mm (9/32″)
• Hidden mounting screws
• Available in two colours: gold-coloured or black
• Practical
• Suitable for wall mounting on wood
• high-quality
• no sharp edges
• stable
• Elegant ornamental décor from the Urban Metal Quest series
• gold-coloured, glossy polished
• Aluminum alloy
• Aluminum
• robust
• high brand quality of Sugatsune / LAMP®

Surface:

• Gold-coloured, shiny polished
• Gold-colored finishes give items a high-quality and elegant look and are often associated with luxury and affluence

Assembly:

• Fastening is done using the screws included in the scope of delivery (countersunk self-tapping screw, 4 x 32 mm)
• The mounting screws are not visible to the user
• The PXB-UM05-101-Q1-GL design hooks have two mounting holes with a diameter of ⌀4.2 mm (11/64″), with countersink
• The distance between the mounting holes is 15 mm (19/32″) (see assembly drawing for more details)

Dimensions:

• Coat hook height: 69.6 mm (2-47/64″)
• Width: 47 mm (1-27/32″)
• Hook tip depth: 39 mm (1-17/32″)

For more dimensions and details, see technical drawing.

Material:

• The PXB-UM05-101-Q1-GL wall hooks are made of sturdy aluminum alloy (aluminum)

Included in delivery:

• 1 piece coat hook PXB-UM05-101-Q1-GL made of robust aluminium alloy, gold-coloured, glossy polished
• 2 pieces countersunk self-tapping screw 4 x 32 mm made of steel
• 1 piece hexagon socket countersunk screw M4 x 8 mm
• 1 piece Allen key SW 2.5 mm

Watch the product video:

Additional information:

• • Download assembly instructions

Manufacturer’s part numbers:

• • • Article ID: 110-033-276
    • Item number: PXB-UM05-101-Q1-GL
    • EAN number: 4510932166171

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Robust lifting hinge for ship doors, maintenance hatches and much more.

The unhinged hinge B-1006-5 (10579) connects a door or flap to the frame and allows a smooth rotational movement.

Its centrally divided plug-in construction allows the moving part to be removed at an opening angle of 90° or more without dismantling the fastening screws.

This allows maintenance work, cleaning and the replacement of doors or covers to be carried out more quickly.

The SUS304 material offers high corrosion resistance and is particularly suitable for damp, hygienically demanding or outdoor systems.

The glossy drum polish ensures a clean surface and makes cleaning easier.

When mounted vertically in pairs, the hinge is designed for a reference door mass of 2 kg (5 lbs).

The high-quality B-1006-5 poster hinges are perfect for, among other things:

• Maintenance door
• Machine covers
• Food processors
• Outdoor units
• Enclosure doors
• Control cabinets
• Service flaps
• Ship Doors
• Maintenance hatches

Technical details:

• Weight: 8 g (for 2 pieces: 16 g)
• Load capacity (load capacity): 2 kg (5 lbs) – for 2 pieces
• Height: 30 mm (1-3/16″)
• Available in 5 sizes: 30 mm, 36 mm, 40 mm, 50 mm and 64 mm
• Easy installation, stable
• Detachable two-piece construction
• Material thickness: 1 mm (3/64″)
• 4 countersunk holes for M3 screws
• ⌀2 mm (5/64″) hinge pin
• Suitable for indoor and outdoor applications
• RoHS10 compliant
• Can be unhooked from an opening angle of 90°
• Centrally separable construction
• Suitable for M3 mounting screws
• Suitable for kitchen and food technology
• Suitable for maritime applications
• Compact and flat design
• Door or flap can be removed without unscrewing
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• Fastening is done with 0.15748031496063 pieces of stainless steel M3 countersunk screws, or 0.15748031496063 pieces of stainless steel countersunk wood screws (not included)
• The push-in hinge B-1006-5 (10579) has 4 mounting holes
• The distance between the mounting holes is 21 mm (53/64″)
• First of all, the fastening positions on the door or flap and frame must be marked and both hinge halves aligned exactly
• The poster hinge is then attached to the substrate via the 4 mounting holes with M3 countersunk screws
• For wood or wood-based materials, countersunk wood screws with a diameter of ⌀3 to ⌀3.1 mm can be used instead
• Then the two hinge halves are plugged together at an opening angle of at least 90°
• Finally, it must be checked whether the door can be moved easily and whether both hinge axes are precisely aligned with each other

Dimensions:

• Total Lifting Hinge Height: 30 mm (1-3/16″)
• Width: 25 mm (63/64″)
• Hinge pin diameter: ⌀2 mm (5/64″)

For more dimensions and details , see technical drawing.

Material:

• The B-1006-5 flagship hinges are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2 pieces lifting hinge B-1006-5 (10579) made of solid stainless steel SUS304, glossy polished, 30 mm (1-3/16″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10579
• Item number: B-1006-5
• GTIN number (EAN, UPC): 0618455525933

Manufacturer: TAKIGEN (Japan)