Application:

Stable height adjuster for cabinets, machines and much more.

This leveler is the perfect solution for aligning kitchen, bathroom or technical furniture quickly and permanently with precision.

The height-adjustable adjustable foot 10.17.047 enables precise alignment of furniture, machines and equipment on uneven floors.

Using the integrated M6 threaded pin and grooves on the edge of the base, the height adjuster can be adjusted by approx. 8 mm (5/16″) without tools.

The round support surface distributes the load evenly and protects the furniture floor from direct contact with the floor.

Alternatively, the adjustable foot 10.17.047 can be adjusted with a flat-head screwdriver.

The base made of black plastic with ⌀20 mm (25/32″) protects sensitive floor coverings and ensures a non-slip grip.

Thanks to the galvanised surface, the height adjuster 10.17.047 is reliably protected against corrosion and is perfect for kitchen, bathroom and workshop furniture.

The high-quality adjustable feet 10.17.047 are perfect for, among other things:

• Kitchen furniture
• Devices
• Shelves
• Chests of drawers
• Sideboards
• Tables
• Furniture carcasses
• Furniture legs
• Pitches
• uneven floors
• Bathroom cabinets
• Workbenches
• Office shelves
• Shop counters
• Motorhome furniture
• Metal cabinets
• Cupboards
• Machines

Technical details:

• Weight: 5.33 g (for 4 pieces: 21.32 g)
• Height: 15 mm (19/32″)
• Easy installation, stable
• adjustable furniture leveling foot with M6 threaded pin
• Adjustment range approx. 8 mm (5/16″)
• Adjustment without tools or via flat-head screwdriver
• Base ⌀20 mm (25/32″) made of black plastic protects sensitive floors
• Galvanized steel thread for high corrosion protection
• Black
• robust
• High brand quality from UMAXO®

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office
• Thread: galvanized

Assembly:

• First, a suitable M6 thread holder must be prepared on the underside of the furniture.
• Depending on the design, an M6 drive nut, M6 screw-in sleeve or another M6 threaded insert is used for this purpose.
• The adjustable foot is then screwed into the holder with the M6 threaded screw.
• The fine adjustment of the height is made without tools or via the slot in the bottom of the base with a flat-head screwdriver.

Dimensions:

• Height adjuster: 15 mm (19/32″)
• Foot Diameter: ⌀20 mm (25/32″)
• Footprint Height: 7 mm (9/32″)

For more dimensions and details , see technical drawing.

Material:

• The 10.17.047 adjustable feet are made of metal and robust plastic (metal and plastic)
• base made of black plastic (PA); The plastic cover protects sensitive floor coverings and ensures a non-slip grip
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 4 pieces Adjustable foot 10.17.047 made of metal and robust plastic, black, 15 mm (19/32″)
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Item ID: 10.17.047 (alternative: 10.17.047-0)
• GTIN number (EAN, UPC): 5704866009232

Manufacturer: SISO Denmark

Application:

Espagnolette lock for furniture, wardrobe, wardrobe and much more, set for a wardrobe door.

The S.RBL.922.165.RH.10 twist bar locks, also known as Espagnolette, are designed for easy and secure locking of cabinets and furniture.

S.RBL.922.165.RH.10 rod locks are used for particularly high doors. The bolt on the screw-on lock and the two locking hooks at the ends of the 1000 mm (39-3/8″) long rods ensure a secure hold.

When the key is turned, the turning rod rotates. The locking hooks enclose the locking bolts and thus provide a secure and firm closure of the furniture door.

The locking cam moves from the lock into the strike plate and, together with the two locking hooks, ensures that the door is closed in three places.

Solid and high-quality workmanship ensures a long and smooth operation of these twist rod locks.

The high-quality S.RBL.922.165.RH.10 torsion bar locks are suitable for:

• Furniture
• Cabinet
• Wardrobe
• Office cabinet
• School Furniture
• Doctor’s office furniture
• Hospital Furniture
• Shopfitting

Technical details:

• Size: 16.5 mm (0.7″)
• Lock: right-hand closing
• with two swivel bars: 1000 mm (39-3/8″)
• Lock: keyed alike (all keys match all locks)
• Complete set (without rotating bar) for a furniture door for cabinets and cabinets
• Quick and easy installation, for screwing
• for swivel bars profiles 6 mm
• for wooden doors with a thickness of 14 to 19 mm
• made of solid die-cast zinc (zamak)
• nickel-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Nickel-plated
• Inner wheel: black
• Mounting bracket: galvanized
• The nickel-plated surface protects against rust and corrosion

Assembly:

• To screw on
• To mount the twist rod lock, it is necessary to drill a hole with a diameter of 17 mm in the front of the furniture
• The cylinder (cylinder length 22 mm) is then inserted from the inside and the lock is screwed on
• Then the cover rosette is inserted from the outside (for further details see
  assembly drawing
  )

Dimensions:

• Lock cylinder diameter: Φ16.5 mm (21/32″)
• Twist Bar Lock Height: 74 mm (2-29/32″)
• Width: 30 mm (1-3/16″)
• Depth: 17/32″ (13.5 mm)
• Distance between mounting holes: 64 mm (2-33/64″)
• Lock cylinder length: 22 mm (55/64″)
• Swivel bar length: 1000 mm (39-3/8″)

For further dimensions and details
see technical drawing
.

Material:

• The torsion rod locks 14.05.268+2×14.05.720 are made of solid die-cast zinc
• The inner wheel of the twist rod locks is made of polypropylene (PP)
• The mounting bracket is made of steel

Included in delivery:

• 1 piece torsion rod lock 14.05.268+2×14.05.720 made of solid die-cast zinc, nickel-plated
• 2 pieces of swivel bar, 1000 mm (39-3/8″)

Additional information:

• Download the Reach Declaration for the Rotary Rods (14.05.720)
• Download the Reach Declaration for the Twist Bar Lock (14.05.268)

Manufacturer’s part numbers:

• Article number: 14.05.268, 14.05.720
• EAN number: 5704866454056, 5704866043960

Manufacturer: SISO Denmark

Application:

T-handle made of zamak for control cabinet, locker, vehicle and much more.

The T-handle 14.08.055-1 is suitable for locking metal cabinets, equipment, machines, special vehicles, enclosures and containers.

To close the cabinet handle 14.08.055-1, the handle must be rotated 90 degrees, and then the key must be turned 180 degrees.

If necessary, the T-handle 14.08.055-1 can also be blocked with the key in the open position, e.g. to prevent the door from being unintentionally locked.

The T-handle has a fixed pin cylinder.

No need to lock: the key can be removed in the open and closed position.

The high-quality 14.08.055-1 control cabinet locks have a simple and robust design and are perfect for:

• Locker
• Metal cabinet
• Sheet metal housing
• Cabinet door
• Ash pan
• Container
• Camper
• Switchboard
• Locker
• Vehicle

Technical details:

• Design: different-closing
• Weight: 233 g
• Size: 79 mm (3.2″)
• high-quality
• square: 8 x 8 mm (5/16″)
• without compulsory closing
• Mounting Type: Internal Mounting
• Reversible key (key fits into the lock on both sides)
• Drill hole spacing: 36 mm (1-27/64″)
• with permanently mounted pin cylinder
• Cylindrical Shape: Round Cylinder
• Closing movement: 90 degrees
• 400 different key variants
• Chrome-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Chrome-plated

Assembly:

• The fastening is done with the help of the screws included in the scope of delivery
• The T-handle 14.08.055-1 is for screwing
• The mounting plate of the control cabinet lock 14.08.055-1 has two mounting holes with the drill hole spacing: 36 mm (1-27/64″)

Dimensions:

• Cabinet lock length: 79 mm (3-7/64″)
• Mounting plate length: 58 mm (2-9/32″)
• Mounting plate width: 24 mm (15/16″)
• Drill hole spacing: 36 mm (1-27/64″)
• Square dimensions: 8 x 8 mm (5/16″)
• Lug length: 54 mm (2-1/8″)

For more dimensions and details, see technical drawing.

Manufacture:

Material:

• The 14.08.055-1 control cabinet locks are made of solid die-cast zinc

Included in delivery:

• 1 control cabinet handle 14.08.055-1 made of solid die-cast zinc, chrome-plated, with permanently mounted locking cylinder
• Two-piece fastening screw
• Two Piece Keys (Reversible Keys)
• 1 piece of locking tongue
• 1 piece of fastening bracket for the closing tongue
• 1 piece of fastening screw for the locking tongue
• Two Pieces Serrated Washer

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article identification number: 14.08.055-1
• EAN Number: 5704866044912

Manufacturer: SISO Denmark

Application:

Master key J12 for SISO locks with J12 system and much more.

With the help of the master key 14.04.123-0, all locks with the J12 system from SISO can be opened.

The master key is necessary if the key matching the lock is damaged or can no longer be found.

It is recommended to provide several master keys per locking system and to store them safely.

The high-quality master keys 14.04.123-0 are perfect for, among other things:

• SISO locks with J12 system

Technical details:

• Weight: 4.5 g
• J12
• Easy installation, stable
• White
• robust
• High brand quality from UMAXO®

Surface:

• White
• White finishes convey a clean and modern aesthetic
• The colour white reflects light effectively, making rooms look brighter and visually larger
• In addition, white objects are inconspicuous and easy to clean, which makes them particularly practical for everyday use

Assembly:

• No special notes

Material:

• The master keys 14.04.123-0 are made of metal and robust plastic
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece master key 14.04.123-0 made of metal and robust plastic, white
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.04.123-0
• EAN number: 5704866040372

Manufacturer: SISO Denmark

Application:

Locker lock for locker, locker, school locker, locker and much more.

The coin deposit locks 14.60.250-0 (14.60.250) are deposit locks with coin slot. As an alternative to the coin, a coin chip can be used (included).

With the deposit locks 14.60.250-0 (14.60.250) you can significantly reduce the risk of losing keys. In addition, users can immediately see whether the locker is free or already occupied.

After inserting the coin or coin chip, the door can be locked and the key removed. Unmatched coins are automatically denied by the internal security system.

The locker lock 14.60.250-0 (14.60.250) is equipped with a small coin return compartment. Once the lock with the key has been opened, the coin falls into the coin return compartment and the user can remove it.

The key always remains in the lock after use and is ready for the next user.

The coin lock 14.60.250-0 (14.60.250) is the proven self-service system for secure cloakroom and valuables storage, e.g. in swimming pools, libraries, fitness centres, etc…

The locker lock 14.60.250-0 (14.60.250) can be used for lockers, lockers, school lockers, cabinets, etc.

The coin deposit lock 14.60.250-0 (14.60.250) can be installed in most common cabinet types.

The coin deposit locks are also perfect for retrofitting existing cabinet systems.

The high-quality 14.60.250-0 (14.60.250) coin locks have a simple and robust design and are perfect for, among other things:

• Locker cabinet
• Clothes locker
• Beach hotel
• Locker
• Locker
• School locker
• Locker

Technical details:

• Design: right-hand closing
• Weight: 346 g
• Size: 110 mm (4.4″)
• suitable for EUR 1.- coins
• Lock cylinder diameter: 22 mm (55/64″)
• right-hand closing (the furniture hinge is on the left)
• stable
• Includes coin chip for operation without change
• dark gray
• Round rosette included to cover the cylinder bore
• robust
• high brand quality from UMAXO®

Surface:

• Dark gray
• Coin Return Tray: Blue
• Rosette: Chrome-plated

Assembly:

• The 14.60.250-0 (14.60.250) coin locks have four mounting holes with a diameter of ⌀6.2 mm (1/4″)
• The distance between the mounting holes is 92 mm (3-5/8″) and 93 mm (3-21/32″)
• For the locking cylinder, a hole with a diameter of ⌀23 mm must be drilled in the furniture door
• The distance between the edge of the door and the hole for the locking cylinder is 29.7 mm (1-11/64″) (for more details, see
  assembly drawing
  )

Dimensions:

• Width of the deposit lock: 110 mm (4-21/64″)
• Height: 125 mm (4-59/64″)
• Lock Cylinder Diameter: ⌀22 mm (55/64″)

For more dimensions and details
, see technical drawing.

Material:

• The coin deposit locks 14.60.250-0 (14.60.250) are made of metal and robust plastic
• Lock: Metal
• Key: Brass
• Key Handle: Plastic
• Housing: Plastic
• Coin Return Compartment: Plastic
• Rosette: Metal

Included in delivery:

• One piece of coin deposit lock 14.60.250-0 (14.60.250) made of metal and robust plastic, dark grey
• Two Pieces of Deposit Key
• A piece of coin chip
• One piece of small coin return compartment
• A piece of rosette (round cover) for the lock cylinder
• A piece of sticker with the note “1 EUR”
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.60.250-0(14.60.250)
• EAN number: 5704866051835

Manufacturer: SISO Denmark

Application:

Locker lock for locker, locker, school locker, locker and much more.

The coin deposit locks 14.60.249-1 (14.60.249) are deposit locks with coin slot.

As an alternative to the coin, a coin chip can be used (included).

With the deposit locks 14.60.249-1 (14.60.249) you can significantly reduce the risk of losing keys. In addition, users can immediately see whether the locker is free or already occupied.

After inserting the coin or coin chip, the door can be locked and the key removed.

Unmatched coins are automatically denied by the internal security system.

The locker lock 14.60.249-1 (14.60.249) is equipped with a small coin return compartment.

Once the lock with the key has been opened, the coin falls into the coin return compartment and the user can remove it.

The key always remains in the lock after use and is ready for the next user.

The coin lock 14.60.249-1 (14.60.249) is the proven self-service system for secure cloakroom and valuables storage, e.g. in swimming pools, libraries, fitness centres, etc…

The locker lock 14.60.249-1 (14.60.249) can be used for lockers, lockers, school lockers, cabinets, etc.

The coin deposit lock 14.60.249-1 (14.60.249) can be installed in most common cabinet types.

The coin deposit locks are also perfect for retrofitting existing cabinet systems.

The high-quality 14.60.249-1 (14.60.249) coin locks have a simple and robust design and are perfect for, among other things:

• Locker cabinet
• Clothes locker
• Beach hotel
• Locker
• Locker
• School locker
• Locker

Technical details:

• Design: left-hand closing
• Weight: 346 g
• Size: 110 mm (4-21/64″)
• suitable for EUR 1.- coins
• Lock cylinder diameter: 22 mm (55/64″)
• left-closing (the furniture hinge is right)
• stable
• dark gray
• robust
• high brand quality from UMAXO®

Surface:

• Dark gray
• Coin Return Tray: Blue
• Rosette: Chrome-plated

Assembly:

• The coin locks 14.60.249-1 (14.60.249) have 4 mounting holes with a diameter of ⌀6.2 mm (1/4″) mm
• The distance between the mounting holes is 92 mm (3-5/8″) and 93 mm (3-21/32″)
• For the locking cylinder, a hole with a diameter of ⌀23 mm must be drilled in the furniture door
• The distance between the edge of the door and the hole for the locking cylinder is 29.7 mm (1-11/64″) (for more details, see
  assembly drawing
  )

Dimensions:

• Width of the deposit lock: 110 mm (4-21/64″)
• Height: 125 mm (4-59/64″)
• Lock Cylinder Diameter: ⌀22 mm (55/64″)

For more dimensions and details
, see technical drawing.

Material:

• The coin deposit locks 14.60.249-1 (14.60.249) are made of metal and robust plastic
• Lock: Metal
• Key: Brass
• Key Handle: Plastic
• Housing: Plastic
• Coin Return Compartment: Plastic
• Rosette: Metal

Included in delivery:

• 1 piece coin deposit lock 14.60.249-1 (14.60.249) made of metal and robust plastic, dark grey
• 2 pcs deposit keys
• 1 piece coin chip
• 1 piece small coin return compartment
• 1 piece rosette (round cover) for the lock cylinder
• 1 piece sticker with the note “1 EUR”
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.60.249-1 (14.60.249)
• EAN number: 5704866051811

Manufacturer: SISO Denmark

Application:

Locker lock for locker, locker, school locker, locker and much more.

The coin deposit locks 14.60.250-C are deposit locks with coin slot. As an alternative to the coin, a coin chip can be used (included).

With the 14.60.250-C deposit locks, you can significantly reduce the risk of losing keys. In addition, users can immediately see whether the locker is free or already occupied.

After inserting the coin or coin chip, the door can be locked and the key removed. Unmatched coins are automatically denied by the internal security system.

The locker lock 14.60.250-C is equipped with a small coin return compartment. Once the lock with the key has been opened, the coin falls into the coin return compartment and the user can remove it.

The key always remains in the lock after use and is ready for the next user.

The 14.60.250-C coin lock is the proven self-service system for secure cloakroom and valuables storage, e.g. in swimming pools, libraries, fitness centres, etc…

The locker lock 14.60.250-C can be used for lockers, lockers, school lockers, cabinets, etc.

The 14.60.250-C coin lock can be installed in most common cabinet types.

The coin deposit locks are also perfect for retrofitting existing cabinet systems.

The high-quality 14.60.250-C coin locks have a simple and robust design and are perfect for, among other things:

• Locker cabinet
• Clothes locker
• Beach hotel
• Locker
• Locker
• School locker
• Locker

Technical details:

• Design: right-hand closing
• Weight: 346 g
• Size: 110 mm (4-21/64″)
• suitable for CHF 1.- coins
• Lock cylinder diameter: 22 mm (55/64″)
• right-hand closing (the furniture hinge is on the left)
• Coin return is automatic after unlocking
• Alternatively usable with enclosed coin chip
• stable
• dark gray
• robust
• high brand quality from UMAXO®

Surface:

• Dark gray
• Coin Return Tray: Blue
• Rosette: Chrome-plated

Assembly:

• The 14.60.250-C coin locks have four mounting holes with a diameter of ⌀6.2 mm (1/4″) mm
• The distance between the mounting holes is 92 mm (3-5/8″) and 93 mm (3-21/32″)
• For the locking cylinder, a hole with a diameter of ⌀23 mm (29/32″) must be drilled in the furniture door
• The distance between the edge of the door and the hole for the locking cylinder is 29.7 mm (1-11/64″) (for more details, see
  assembly drawing
  )

Dimensions:

• Width of the deposit lock: 110 mm (4-21/64″)
• Height: 125 mm (4-59/64″)
• Lock Cylinder Diameter: ⌀22 mm (55/64″)

For more dimensions and details, see technical drawing.

Material:

• The 14.60.250-C coin locks are made of metal and robust plastic
• Lock: Metal
• Key: Brass
• Key Handle: Plastic
• Housing: Plastic
• Coin Return Compartment: Plastic
• Rosette: Metal

Included in delivery:

• 1 piece coin deposit lock 14.60.250-C made of metal and robust plastic, dark grey
• 2 pcs deposit keys
• 1 piece coin chip
• 1 piece small coin return compartment
• 1 piece rosette (round cover) for the lock cylinder
• 1 piece sticker with the note “1 CHF”
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.60.250-C
• EAN number: 5704866503907

Manufacturer: SISO Denmark

Application:

Locker lock for locker, locker, school locker, locker and much more.

The coin deposit locks 14.60.249-C are deposit locks with coin slot. As an alternative to the coin, a coin chip can be used (included).

With the 14.60.249-C deposit locks, you can significantly reduce the risk of losing keys. In addition, users can immediately see whether the locker is free or already occupied.

After inserting the coin or coin chip, the door can be locked and the key removed. Unmatched coins are automatically denied by the internal security system.

The locker lock 14.60.249-C is equipped with a small coin return compartment. Once the lock with the key has been opened, the coin falls into the coin return compartment and the user can remove it.

The key always remains in the lock after use and is ready for the next user.

The 14.60.249-C coin lock is the proven self-service system for secure cloakroom and valuables storage, e.g. in swimming pools, libraries, fitness centres, etc…

The locker lock 14.60.249-C can be used for lockers, lockers, school lockers, cabinets, etc.

The 14.60.249-C coin lock can be installed in most common cabinet types.

The coin deposit locks are also perfect for retrofitting existing cabinet systems.

The high-quality 14.60.249-C coin locks have a simple and robust design and are perfect for, among other things:

• Locker cabinet
• Clothes locker
• Beach hotel
• Locker
• Locker
• School locker
• Locker

Technical details:

• Design: left-hand closing
• Weight: 346 g
• Size: 110 mm (4-21/64″)
• suitable for CHF 1.- coins
• Lock cylinder diameter: 22 mm (55/64″)
• left-closing (the furniture hinge is right)
• Coin return compartment integrated with visible removal opening
• Alternative use possible with enclosed coin chip
• stable
• dark gray
• robust
• high brand quality from UMAXO®

Surface:

• Dark gray
• Coin Return Tray: Blue
• Rosette: Chrome-plated

Assembly:

• The 14.60.249-C coin locks have four mounting holes with a diameter of ⌀6.2 mm (1/4″)
• The distance between the mounting holes is 92 mm (3-5/8″) and 93 mm (3-21/32″)
• For the locking cylinder, a hole with a diameter of ⌀23 mm must be drilled in the furniture door
• The distance between the edge of the door and the hole for the locking cylinder is 29.7 mm (1-11/64″) (for more details, see
  assembly drawing
  )

Dimensions:

• Width of the deposit lock: 110 mm (4-21/64″)
• Height: 125 mm (4-59/64″)
• Lock Cylinder Diameter: ⌀22 mm (55/64″)

For more dimensions and details, see technical drawing.

Material:

• The 14.60.249-C coin locks are made of metal and robust plastic
• Lock: Metal
• Key: Brass
• Key Handle: Plastic
• Housing: Plastic
• Coin Return Compartment: Plastic
• Rosette: Metal

Included in delivery:

• One piece of coin deposit lock 14.60.249-C made of metal and robust plastic, dark grey
• Two Pieces of Deposit Key
• A piece of coin chip
• One piece of small coin return compartment
• A piece of rosette (round cover) for the lock cylinder
• A piece of sticker with the note “1 CHF”

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.60.249-C
• EAN number: 5704866051811

Manufacturer: SISO Denmark

Application:

Coin lock with coin holder for club, swimming pool and much more.

Right-closing means that the furniture hinges are on the right side of the door and the door handle and lock are on the left side (view of the closed door from the outside).

The payment coin lock 14.60.249-1+14.60.210-0 is a mechanical cashier lock for lockers that is operated with a 1 euro coin.

It is specifically designed to hold the 1 euro coin permanently, making it perfect for commercial use.

After inserting the 1 euro coin, the lock mechanism is released and the user can lock the locker with the key.

The €1 coin falls into an integrated, lockable coin container that can be emptied regularly by the operator.

When the locker is opened, the key remains stuck in the lock, so that the locker can only be closed again by inserting money again.

This ensures continuous payment per use.

The system works completely mechanically, is particularly low-maintenance and does not require a power connection.

It has a robust construction and is protected against vandalism.

The application is particularly suitable for high-traffic areas such as discos, swimming pools, campsites or sports facilities.

With this lock, operators can easily charge a usage fee while ensuring orderly use of the lockers.

The 14.60.249-1 coin locks are suitable for installation in new furniture as well as for repairing existing cabinets.

The high-quality payment coin locks 14.60.249-1 are perfect for, among other things:

• Hostel
• Sports facilities
• Discotheque
• Swimming pool
• Campsite
• Gym
• Event
• Festival
• Club
• Swimming pool

Technical details:

• Design: right-hand closing
• Weight: 520.45 g
• Size: 125 mm (4-59/64″)
• 1 euro coin
• Easy installation, stable
• Coin acceptance for 1 euro coin
• Withholding of the coin (no return)
• Mechanical operation without electricity
• Integrated, lockable coin container
• Robust, vandal-proof construction
• Black
• robust
• High brand quality from UMAXO®

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office

Assembly:

• Payment coin lock 14.60.249-1 is for screwing
• First, the coin lock is mounted
• The blue plastic coin catcher must be removed
• Then the coin container is screwed onto it
• The 14.60.249-1 coin lock has four mounting holes with a diameter of 6 mm (15/64″)
• The coin case has four mounting holes with a diameter of 4.5 mm (11/64″) (for more details, see assembly drawing)

Dimensions:

• Height of the coin lock: 125 mm (4-59/64″)
• Width: 110 mm (4-21/64″)
• Depth: 18 mm (45/64″)
• Coin container height: 119 mm (4-11/16″)
• Width: 110 mm (4-21/64″)
• Depth: 33.5 mm (1-5/16″)

For more dimensions and details , see technical drawing.

Material:

• The 14.60.249-1 coin locks are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece payment coin lock 14.60.249-1 made of metal and robust plastic, black, design: right-hand closing
• Incl. lock cylinder
• 2 keys for the coin lock
• 1 piece cylindrical rosette
• 1 piece blue plastic coin catcher (removable)
• 1 piece coin blank
• 2 pcs keys for the coin container
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.60.249-1 and 14.60.210-0
• EAN number: 5704866051811 and 5704866442381

Manufacturer: SISO Denmark

Application:

Coin lock with coin holder for club, swimming pool and much more.

Left-closing means that the furniture hinges are on the left side of the door and the door handle and lock are on the right side (view of the closed door from the outside).

The payment coin lock 14.60.250-0+14.60.210-0 is a mechanical cash lock for lockers that is operated with a 1 euro coin.

It is specifically designed to hold the 1 euro coin permanently, making it perfect for commercial use.

After inserting the 1 euro coin, the lock mechanism is released and the user can lock the locker with the key.

The €1 coin falls into an integrated, lockable coin container that can be emptied regularly by the operator.

When the locker is opened, the key remains stuck in the lock, so that the locker can only be closed again by inserting money again.

This ensures continuous payment per use.

The system works completely mechanically, is particularly low-maintenance and does not require a power connection.

It has a robust construction and is protected against vandalism.

The application is particularly suitable for high-traffic areas such as discos, swimming pools, campsites or sports facilities.

With this lock, operators can easily charge a usage fee while ensuring orderly use of the lockers.

The 14.60.250-0 coin locks are suitable for installation in new furniture as well as for repairing existing cabinets.

The high-quality 14.60.250-0 payment coin locks are perfect for, among other things:

• Hostel
• Sports facilities
• Discotheque
• Swimming pool
• Campsite
• Gym
• Event
• Festival
• Club
• Swimming pool

Technical details:

• Design: left-hand closing
• Weight: 520.45 g
• Size: 125 mm (4-59/64″)
• 1 euro coin
• Easy installation, stable
• Coin acceptance for 1 euro coin
• Withholding of the coin (no return)
• Mechanical operation without electricity
• Integrated, lockable coin container
• Robust, vandal-proof construction
• Black
• robust
• High brand quality from UMAXO®

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office

Assembly:

• Payment coin lock 14.60.250-0 is for screwing
• First, the coin lock is mounted
• The blue plastic coin catcher must be removed
• Then the coin container is screwed onto it
• The 14.60.250-0 coin lock has four mounting holes with a diameter of 6 mm (15/64″)
• The coin case has four mounting holes with a diameter of 4.5 mm (11/64″) (for more details, see assembly drawing)

Dimensions:

• Height of the coin lock: 125 mm (4-59/64″)
• Width: 110 mm (4-21/64″)
• Depth: 18 mm (45/64″)
• Coin container height: 119 mm (4-11/16″)
• Width: 110 mm (4-21/64″)
• Depth: 33.5 mm (1-5/16″)

For more dimensions and details , see technical drawing.

Material:

• The 14.60.250-0 coin locks are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece payment coin lock 14.60.250-0 made of metal and robust plastic, black, version: left-hand closing
• Incl. lock cylinder
• 2 keys for the coin lock
• 1 piece cylindrical rosette
• 1 piece blue plastic coin catcher (removable)
• 1 piece coin blank
• 2 pcs keys for the coin container
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.60.250-0 and 14.60.210-0
• EAN number: 5704866051835 and 5704866442381

Manufacturer: SISO Denmark