Application:

Robust spring hinge for equipment flaps, housing doors, covers and much more.

The TH-61SUS-3 spring hinge supports the automatic opening of flaps and lightweight doors through an integrated spring in the hinge pin.

The spring force acts in the direction of opening and thus supports the swinging up of moving components.

In the free position, the hinge is located at 90°, which makes it particularly suitable for equipment flaps, covers and enclosure doors.

Made entirely of SUS304, the construction offers high corrosion resistance and is also suitable for more demanding operating conditions and for long-lasting technical applications.

Four mounting holes allow for easy and secure screw mounting.

The compact dimensions of 38 mm (1-1/2″) x 51 mm (2-1/64″) allow the spring hinge to be integrated into device, housing and machine designs to save space.

The high-quality TH-61SUS-3 spring hinges are perfect for, among other things:

• Maintenance hatches
• Machine Enclosures
• Office Equipment
• Communication Devices
• Measuring instruments
• Device flaps
• Enclosure doors
• Covers

Technical details:

• Torque: 12.3 N·m
• Weight: 19 g (for 2 pieces: 38 g)
• Size: 38 mm (1-1/2″)
• Available in 4 torques: 1.9 N, 8.8 N, 12.3 N and 12.8 N
• Easy installation, stable
• Spring force in the opening direction
• Spring integrated into the hinge pin
• Free position at 90°
• 4 mounting holes
• ⌀3.2 mm (1/8″) mounting holes
• Material thickness: 1.5 mm (1/16″)
• Compact 38 mm (1-1/2″) x 51 mm (2-1/64″) design
• Reference spring force at position a: 5.9 N (600 gf)
• Reference spring force at position b: 9.8 N (1000 gf)
• Reference spring force at position c: 12.8 N (1300 gf)
• Suitable for lightweight doors and flaps
• Natural (unprocessed)
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality of TOCHIGIYA®

Surface:

• Natural (unprocessed)
• The material surface remains visible and is not covered by an additional coating

Assembly:

• The fastening is done with 4 x M3 pan head screws or flat round head screws, preferably made of stainless steel (not included)
• The TH-61SUS-3 spring strap has 4 mounting holes
• First, the mounting points must be marked according to the hole pattern of 25 mm (63/64″) x 32 mm (1-17/64″) and the necessary mounting holes must be prepared
• The spring hinge is then attached to the fixed surface with one hinge leaf and to the movable flap or door with the other hinge leaf
• The installation direction must be selected so that the spring force acts in the desired opening direction
• Four M3 pan head screws or screws with ⌀3 mm for wooden surfaces are suitable for fastening
• The screws are tightened evenly without deforming the hinge wings
• Finally, the flap must be moved several times and the desired opening effect of the spring hinge must be checked (for more details, see assembly drawing)

Dimensions:

• Overall width: 38 mm (1-1/2″)
• Overall Height: 51 mm (2-1/64″)
• Material thickness: 1.5 mm (1/16″)
• Horizontal hole spacing: 25 mm (63/64″)
• Top edge to bore center distance: 3/8″ (9.5 mm)
• Vertical hole spacing: 32 mm (1-17/64″)
• Mounting holes: 4 x ⌀3.2 mm (1/8″)
• Corner Radius: R1.5 mm (1/16″)
• Hinge pin: ⌀3 mm (1/8″)
• Free Standing: 90°

For more dimensions and details , see technical drawing.

Material:

• The TH-61SUS-3 spring hinges are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2 pieces spring hinge TH-61SUS-3 made of solid stainless steel SUS304, natural (unprocessed), 38 mm (1-1/2″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: TH-61SUS-3

Manufacturer: TOCHIGIYA (Japan)

Application:

Robust flat hinge for machine doors, maintenance hatches and much more.

The B-1059-5 (10661) screw-on hinge connects doors or hatches to a body or frame, allowing for easy, permanent rotational movement.

The flat design is particularly suitable for screw-on applications on housings, machine covers and cabinets.

SUS304 stainless steel offers good corrosion resistance, making the hinge suitable for humid or more demanding environments.

The polished surface ensures a clean, high-quality look and makes cleaning easier.

4 countersunk holes enable stable fastening, whereby the screw heads can be largely flush with the hinge blades.

When using two hinges vertically, the reference door weight is up to 4.5 kg (10 lbs) for a door size of 500 mm (19-11/16″) x 250 mm (9-27/32″).

The high-quality flat hinges B-1059-5 are perfect for, among other things:

• Enclosure doors
• Machine covers
• Stainless steel housing
• Control cabinets
• Device flaps
• Cabinet doors
• Machine doors
• Maintenance hatches

Technical details:

• Weight: 8 g (for 2 pieces: 16 g)
• Load capacity (load capacity): 4.5 kg (10 lbs) – for 2 pieces
• Size: 38 mm (1-1/2″)
• Available in 5 sizes: 38 mm, 51 mm, 64 mm, 76 mm and 89 mm
• Easy installation, stable
• Material thickness 0.8 mm (1/32″)
• 4 recessed mounting holes
• Mounting holes with ⌀4.5 mm
• Countersink with ⌀5.5 mm
• Hinge pin with ⌀3 mm
• Hinge roller with ⌀4.8 mm outer diameter
• Five joint segments
• Reference door for weight specification: 500 mm (19-11/16″) x 250 mm (9-27/32″)
• Suitable for different door and flap applications
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• The fastening is done with 4 x countersunk screws made of stainless steel V2A, approx. ⌀3.5 mm (not included)
• The flat hinge has 4 mounting holes with countersink
• The flat hinge is first aligned with the door or flap and frame in the desired position
• The 4 attachment points are marked according to the hole pattern and, depending on the material used, pre-drilled or threaded
• The hinge is then fastened with suitable countersunk screws
• For a visually clean installation, the screw heads should be as flush as possible in the countersinks
• Before the final tightening, it must be checked whether the door or flap can be moved freely and without bracing

Dimensions:

• Length: 38 mm (1-1/2″)
• Width: 26.5 mm (1-3/64″)
• Material thickness: 0.8 mm (1/32″)
• Pinhole size: 27 mm (1-1/16″)
• Number of joint segments: 3

For more dimensions and details , see technical drawing.

Material:

• The flat hinges B-1059-5 are made of solid stainless steel SUS304 (V2A or 1.4301)
• SUS304 stainless steel is characterized by its high corrosion resistance and durability, which makes it ideal for use in demanding environments
• In addition, it offers an attractive interface that is both modern and easy to maintain

Included in delivery:

• 2pcs flat hinge B-1059-5 (10661) made of solid stainless steel SUS304, glossy polished, 38 mm (1-1/2″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10661
• Item number: B-1059-5

Manufacturer: TAKIGEN (Japan)