Application:

Stable flap support for fold-ups, kitchen furniture and much more.

Version: left. Only the left side is included.

The HDS-30ML-BL (180-104-081) flap support is a soft-down flap holder for upward-opening wooden furniture flaps.

It slows down the closing movement of the flap and thus prevents it from slamming hard.

The integrated catch mechanism holds the flap securely to the body in the closed position.

In the open position, the fitting supports a stable end position with an opening angle of 80°.

With a torque of 19.6 to 24.4 N·m per pair, this version is suitable for medium-sized and medium-heavy lifters.

The fitting can be combined with piano hinges, rag hinges or a suitable pot hinge and enables controlled, high-quality flap movement in furniture construction.

The high-quality HDS-30ML-BL flap fittings are perfect for, among other things:

• Furniture flaps
• Wooden flaps
• Cabinet flaps
• Wall cabinets
• Wall cabinets
• Living room furniture
• Flip up
• Kitchen furniture

Technical details:

• Version: left
• Weight: 294 g
• Load capacity (load capacity): 9.75 N (1 kp)
• Size: 140 mm (5-33/64″)
• Torque 19.6 to 24.4 N·m per pair, for medium-sized and medium-duty flaps
• Easy installation, stable
• For upward-opening wooden flaps
• Soft-down function when closing
• Integrated damper against slamming
• Integrated catch mechanism for closed position
• Hold function in fully open position
• Tested for 50,000 opening and closing cycles
• Beam angle 80°
• Suitable for piano strap, rag strap or cup hinge
• Black
• robust
• High brand quality from Sugatsune / LAMP®.

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office
• Lever arm of the flap fitting: nickel-plated

Assembly:

• The fastening is done using the six screws included in the scope of delivery (self-tapping pan head screw 3.5 x 15 mm)
• First, the torque of the flap must be calculated and checked so that the design fits the weight and height of the flap
• After that, the hinges must be installed correctly, and the flap must be able to open and close smoothly before installing the flap holder
• The HDS-30ML-BL flap support is attached to the left side of the carcase with screws ⌀ 3.5 x 15 mm according to the assembly drawing
• The flap holder has 3 mounting holes. The distance between the mounting holes is 126 mm (4-61/64″) and 28 mm (1-7/64″)
• The distance between the center of the fitting and the inner front edge is 35 mm (1-3/8″)
• The mounting plate is first only pre-fixed via the slotted hole on the flap
• The flap is then opened and closed so that the position of the mounting plate can be adjusted so that the movement runs smoothly and smoothly
• Finally, the mounting plate is screwed firmly over the round holes and all screws are checked for tightness. The distance between the mounting holes is 32 mm (1-17/64″) (for more details, see assembly drawing)

Dimensions:

• Length of flap fitting: 140 mm (5-33/64″)
• Width: 40 mm (1-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details , see technical drawing.

Material:

• The HDS-30ML-BL flap fittings are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece flap holder HDS-30ML-BL (180-104-081) made of metal and robust plastic, black, version: left
• 6 pieces self-tapping pan head screw 3.5 x 15 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 180-104-081
• Item number: HDS-30ML-BL
• GTIN number (EAN, UPC): 4510932024211

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Stable flap support for fold-ups, kitchen furniture and much more.

Version: right. Only the right side is included.

The HDS-30KR-WT (180-109-270) flap support is a soft-down flap holder for upward-opening wooden furniture flaps.

It slows down the closing movement of the flap and thus prevents it from slamming hard.

The integrated catch mechanism holds the flap securely to the body in the closed position.

In the open position, the fitting supports a stable end position with an opening angle of 80°.

With a torque of 13.7 to 19.5 N·m per pair, this version is suitable for small and light flaps.

The fitting can be combined with piano hinges, rag hinges or a suitable pot hinge and enables controlled, high-quality flap movement in furniture construction.

The high-quality HDS-30KR-WT flap fittings are perfect for, among other things:

• Furniture flaps
• Wooden flaps
• Cabinet flaps
• Wall cabinets
• Wall cabinets
• Living room furniture
• Flip up
• Kitchen furniture

Technical details:

• Version: right
• Weight: 276 g
• Load capacity (load capacity): 9.75 N (1 kp)
• Size: 140 mm (5-33/64″)
• Torque 13.7 to 19.5 N·m per pair, for small and light flaps
• Easy installation, stable
• For upward-opening wooden flaps
• Soft-down function when closing
• Integrated damper against slamming
• Integrated catch mechanism for closed position
• Hold function in fully open position
• Tested for 50,000 opening and closing cycles
• Beam angle 80°
• Suitable for piano strap, rag strap or cup hinge
• White
• robust
• High brand quality from Sugatsune / LAMP®.

Surface:

• White
• White finishes convey a clean and modern aesthetic
• The colour white reflects light effectively, making rooms look brighter and visually larger
• In addition, white objects are inconspicuous and easy to clean, which makes them particularly practical for everyday use
• Lever arm of the flap fitting: nickel-plated

Assembly:

• The fastening is done using the six screws included in the scope of delivery (self-tapping pan head screw 3.5 x 15 mm)
• First, the torque of the flap must be calculated and checked so that the design fits the weight and height of the flap
• After that, the hinges must be installed correctly, and the flap must be able to open and close smoothly before installing the flap holder
• The HDS-30KR-WT flap support is attached to the right side panel of the carcass according to the assembly drawing with screws ⌀ 3.5 x 15 mm
• The flap holder has 3 mounting holes. The distance between the mounting holes is 126 mm (4-61/64″) and 28 mm (1-7/64″)
• The distance between the center of the fitting and the inner front edge is 35 mm (1-3/8″)
• The mounting plate is first only pre-fixed via the slotted hole on the flap
• The flap is then opened and closed so that the position of the mounting plate can be adjusted so that the movement runs smoothly and smoothly
• Finally, the mounting plate is screwed firmly over the round holes and all screws are checked for tightness. The distance between the mounting holes is 32 mm (1-17/64″) (for more details, see assembly drawing)

Dimensions:

• Length of flap fitting: 140 mm (5-33/64″)
• Width: 40 mm (1-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details , see technical drawing.

Material:

• HDS-30KR-WT flap fittings are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece flap holder HDS-30KR-WT (180-109-270) made of metal and robust plastic, white, version: right
• 6 pieces self-tapping pan head screw 3.5 x 15 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 180-109-270
• Item number: HDS-30KR-WT
• GTIN number (EAN, UPC): 4510932024204

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Stable flap support for fold-ups, kitchen furniture and much more.

Version: left. Only the left side is included.

The HDS-30KL-WT (180-109-271) flap support is a soft-down flap holder for upward-opening wooden furniture flaps.

It slows down the closing movement of the flap and thus prevents it from slamming hard.

The integrated catch mechanism holds the flap securely to the body in the closed position.

In the open position, the fitting supports a stable end position with an opening angle of 80°.

With a torque of 13.7 to 19.5 N·m per pair, this version is suitable for small and light flaps.

The fitting can be combined with piano hinges, rag hinges or a suitable pot hinge and enables controlled, high-quality flap movement in furniture construction.

The high-quality HDS-30KL-WT flap fittings are perfect for, among other things:

• Furniture flaps
• Wooden flaps
• Cabinet flaps
• Wall cabinets
• Wall cabinets
• Living room furniture
• Flip up
• Kitchen furniture

Technical details:

• Version: left
• Weight: 276 g
• Load capacity (load capacity): 9.75 N (1 kp)
• Size: 140 mm (5-33/64″)
• Torque 13.7 to 19.5 N·m per pair, for small and light flaps
• Easy installation, stable
• For upward-opening wooden flaps
• Soft-down function when closing
• Integrated damper against slamming
• Integrated catch mechanism for closed position
• Hold function in fully open position
• Tested for 50,000 opening and closing cycles
• Beam angle 80°
• Suitable for piano strap, rag strap or cup hinge
• White
• robust
• High brand quality from Sugatsune / LAMP®.

Surface:

• White
• White finishes convey a clean and modern aesthetic
• The colour white reflects light effectively, making rooms look brighter and visually larger
• In addition, white objects are inconspicuous and easy to clean, which makes them particularly practical for everyday use
• Lever arm of the flap fitting: nickel-plated

Assembly:

• The fastening is done using the six screws included in the scope of delivery (self-tapping pan head screw 3.5 x 15 mm)
• First, the torque of the flap must be calculated and checked so that the design fits the weight and height of the flap
• After that, the hinges must be installed correctly, and the flap must be able to open and close smoothly before installing the flap holder
• The flap support HDS-30KL-WT is attached to the left side of the carcase according to the assembly drawing with screws ⌀ 3.5 x 15 mm
• The flap holder has 3 mounting holes. The distance between the mounting holes is 126 mm (4-61/64″) and 28 mm (1-7/64″)
• The distance between the center of the fitting and the inner front edge is 35 mm (1-3/8″)
• The mounting plate is first only pre-fixed via the slotted hole on the flap
• The flap is then opened and closed so that the position of the mounting plate can be adjusted so that the movement runs smoothly and smoothly
• Finally, the mounting plate is screwed firmly over the round holes and all screws are checked for tightness. The distance between the mounting holes is 32 mm (1-17/64″) (for more details, see assembly drawing)

Dimensions:

• Length of flap fitting: 140 mm (5-33/64″)
• Width: 40 mm (1-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details , see technical drawing.

Material:

• The HDS-30KL-WT flap fittings are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece flap holder HDS-30KL-WT (180-109-271) made of metal and robust plastic, white, version: left
• 6 pieces self-tapping pan head screw 3.5 x 15 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 180-109-271
• Item number: HDS-30KL-WT
• GTIN number (EAN, UPC): 4510932024198

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Stable flap support for fold-ups, kitchen furniture and much more.

Version: right. Only the right side is included.

The HDS-30KR-BL (180-104-078) flap support is a soft-down flap holder for upward-opening wooden furniture flaps.

It slows down the closing movement of the flap and thus prevents it from slamming hard.

The integrated catch mechanism holds the flap securely to the body in the closed position.

In the open position, the fitting supports a stable end position with an opening angle of 80°.

With a torque of 13.7 to 19.5 N·m per pair, this version is suitable for small and light flaps.

The fitting can be combined with piano hinges, rag hinges or a suitable pot hinge and enables controlled, high-quality flap movement in furniture construction.

The high-quality HDS-30KR-BL flap fittings are perfect for, among other things:

• Furniture flaps
• Wooden flaps
• Cabinet flaps
• Wall cabinets
• Wall cabinets
• Living room furniture
• Flip up
• Kitchen furniture

Technical details:

• Version: right
• Weight: 276 g
• Load capacity (load capacity): 9.75 N (1 kp)
• Size: 140 mm (5-33/64″)
• Torque 13.7 to 19.5 N·m per pair, for small and light flaps
• Easy installation, stable
• For upward-opening wooden flaps
• Soft-down function when closing
• Integrated damper against slamming
• Integrated catch mechanism for closed position
• Hold function in fully open position
• Tested for 50,000 opening and closing cycles
• Beam angle 80°
• Suitable for piano strap, rag strap or cup hinge
• Black
• robust
• High brand quality from Sugatsune / LAMP®.

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office
• Lever arm of the flap fitting: nickel-plated

Assembly:

• The fastening is done using the six screws included in the scope of delivery (self-tapping pan head screw 3.5 x 15 mm)
• First, the torque of the flap must be calculated and checked so that the design fits the weight and height of the flap
• After that, the hinges must be installed correctly, and the flap must be able to open and close smoothly before installing the flap holder
• The HDS-30KR-BL flap support is attached to the right carcase side panel with screws ⌀ 3.5 x 15 mm according to the assembly drawing
• The flap holder has 3 mounting holes. The distance between the mounting holes is 126 mm (4-61/64″) and 28 mm (1-7/64″)
• The distance between the center of the fitting and the inner front edge is 35 mm (1-3/8″)
• The mounting plate is first only pre-fixed via the slotted hole on the flap
• The flap is then opened and closed so that the position of the mounting plate can be adjusted so that the movement runs smoothly and smoothly
• Finally, the mounting plate is screwed firmly over the round holes and all screws are checked for tightness. The distance between the mounting holes is 32 mm (1-17/64″) (for more details, see assembly drawing)

Dimensions:

• Length of flap fitting: 140 mm (5-33/64″)
• Width: 40 mm (1-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details , see technical drawing.

Material:

• The HDS-30KR-BL flap fittings are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece flap holder HDS-30KR-BL (180-104-078) made of metal and robust plastic, black, version: right
• 6 pieces self-tapping pan head screw 3.5 x 15 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 180-104-078
• Item number: HDS-30KR-BL
• GTIN number (EAN, UPC): 4510932024181

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Stable flap support for fold-ups, kitchen furniture and much more.

Version: left. Only the left side is included.

The HDS-30KL-BL (180-104-079) flap support is a soft-down flap holder for upward-opening wooden furniture flaps.

It slows down the closing movement of the flap and thus prevents it from slamming hard.

The integrated catch mechanism holds the flap securely to the body in the closed position.

In the open position, the fitting supports a stable end position with an opening angle of 80°.

With a torque of 13.7 to 19.5 N·m per pair, this version is suitable for small and light flaps.

The fitting can be combined with piano hinges, rag hinges or a suitable pot hinge and enables controlled, high-quality flap movement in furniture construction.

The high-quality HDS-30KL-BL flap fittings are perfect for, among other things:

• Furniture flaps
• Wooden flaps
• Cabinet flaps
• Wall cabinets
• Wall cabinets
• Living room furniture
• Flip up
• Kitchen furniture

Technical details:

• Version: left
• Weight: 276 g
• Load capacity (load capacity): 9.75 N (1 kp)
• Size: 140 mm (5-33/64″)
• Torque 13.7 to 19.5 N·m per pair, for small and light flaps
• Easy installation, stable
• For upward-opening wooden flaps
• Soft-down function when closing
• Integrated damper against slamming
• Integrated catch mechanism for closed position
• Hold function in fully open position
• Tested for 50,000 opening and closing cycles
• Beam angle 80°
• Suitable for piano strap, rag strap or cup hinge
• Black
• robust
• High brand quality from Sugatsune / LAMP®.

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office
• Lever arm of the flap fitting: nickel-plated

Assembly:

• The fastening is done using the six screws included in the scope of delivery (self-tapping pan head screw 3.5 x 15 mm)
• First, the torque of the flap must be calculated and checked so that the design fits the weight and height of the flap
• After that, the hinges must be installed correctly, and the flap must be able to open and close smoothly before installing the flap holder
• The HDS-30KL-BL flap support is attached to the left side of the carcase with screws ⌀ 3.5 x 15 mm according to the assembly drawing
• The flap holder has 3 mounting holes. The distance between the mounting holes is 126 mm (4-61/64″) and 28 mm (1-7/64″)
• The distance between the center of the fitting and the inner front edge is 35 mm (1-3/8″)
• The mounting plate is first only pre-fixed via the slotted hole on the flap
• The flap is then opened and closed so that the position of the mounting plate can be adjusted so that the movement runs smoothly and smoothly
• Finally, the mounting plate is screwed firmly over the round holes and all screws are checked for tightness. The distance between the mounting holes is 32 mm (1-17/64″) (for more details, see assembly drawing)

Dimensions:

• Length of flap fitting: 140 mm (5-33/64″)
• Width: 40 mm (1-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details , see technical drawing.

Material:

• The HDS-30KL-BL flap fittings are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece flap holder HDS-30KL-BL (180-104-079) made of metal and robust plastic, black, version: left
• 6 pieces self-tapping pan head screw 3.5 x 15 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 180-104-079
• Item number: HDS-30KL-BL
• GTIN number (EAN, UPC): 4510932024174

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Stable flap support for fold-ups, kitchen furniture and much more.

Version: right. Only the right side is included.

The HDS-30HR-BL (180-104-082) flap support is a soft-down flap holder for upward-opening wooden furniture flaps.

It slows down the closing movement of the flap and thus prevents it from slamming hard.

The integrated catch mechanism holds the flap securely to the body in the closed position.

In the open position, the fitting supports a stable end position with an opening angle of 80°.

The heavy-duty H version is intended for flaps with a torque of 24.5 to 29.4 N·m per pair and is therefore suitable for larger or heavier flaps.

The fitting can be combined with piano hinges, rag hinges or a suitable pot hinge and enables controlled, high-quality flap movement in furniture construction.

The high-quality HDS-30HR-BL flap fittings are perfect for, among other things:

• Furniture flaps
• Wooden flaps
• Cabinet flaps
• Wall cabinets
• Wall cabinets
• Living room furniture
• Flip up
• Kitchen furniture

Technical details:

• Version: right
• Weight: 300 g
• Load capacity (load capacity): 14.7 N (1.5 kp)
• Size: 140 mm (5-33/64″)
• Easy installation, stable
• Model H for heavy flaps
• For upward-opening wooden flaps
• Soft-down function when closing
• Integrated damper against slamming
• Integrated catch mechanism for closed position
• Hold function in fully open position
• Tested for 50,000 opening and closing cycles
• Beam angle 80°
• Suitable for piano strap, rag strap or cup hinge
• Torque range 24.5 to 29.4 N·m per pair
• Black
• robust
• High brand quality from Sugatsune / LAMP®.

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office
• Lever arm of the flap fitting: nickel-plated

Assembly:

• The fastening is done using the six screws included in the scope of delivery (self-tapping pan head screw 3.5 x 15 mm)
• First, the torque of the flap must be calculated and checked so that the design fits the weight and height of the flap
• After that, the hinges must be installed correctly, and the flap must be able to open and close smoothly before installing the flap holder
• The HDS-30HR-BL flap support is attached to the right side of the carcase with screws ⌀ 3.5 x 15 mm according to the assembly drawing
• The flap holder has 3 mounting holes. The distance between the mounting holes is 126 mm (4-61/64″) and 28 mm (1-7/64″)
• The distance between the center of the fitting and the inner front edge is 35 mm (1-3/8″)
• The mounting plate is first only pre-fixed via the slotted hole on the flap
• The flap is then opened and closed so that the position of the mounting plate can be adjusted so that the movement runs smoothly and smoothly
• Finally, the mounting plate is screwed firmly over the round holes and all screws are checked for tightness. The distance between the mounting holes is 32 mm (1-17/64″) (for more details, see assembly drawing)

Dimensions:

• Length of flap fitting: 140 mm (5-33/64″)
• Width: 40 mm (1-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details , see technical drawing.

Material:

• The HDS-30HR-BL flap fittings are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece flap holder HDS-30HR-BL (180-104-082) made of metal and robust plastic, black, version: right
• 6 pieces self-tapping pan head screw 3.5 x 15 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 180-104-082
• Item number: HDS-30HR-BL
• GTIN number (EAN, UPC): 4510932024266

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Stable flap support for fold-ups, kitchen furniture and much more.

Version: left. Only the left side is included.

The HDS-30HL-BL (HDS-30HL-BL) flap support is a soft-down flap holder for upward-opening wooden furniture flaps.

It slows down the closing movement of the flap and thus prevents it from slamming hard.

The integrated catch mechanism holds the flap securely to the body in the closed position.

In the open position, the fitting supports a stable end position with an opening angle of 80°.

The heavy-duty H version is intended for flaps with a torque of 24.5 to 29.4 N·m per pair and is therefore suitable for larger or heavier flaps.

The fitting can be combined with piano hinges, rag hinges or a suitable pot hinge and enables controlled, high-quality flap movement in furniture construction.

The high-quality HDS-30HL-BL flap fittings are perfect for, among other things:

• Furniture flaps
• Wooden flaps
• Cabinet flaps
• Wall cabinets
• Wall cabinets
• Living room furniture
• Flip up
• Kitchen furniture

Technical details:

• Version: left
• Weight: 300 g
• Load capacity (load capacity): 14.7 N (1.5 kp)
• Size: 140 mm (5-33/64″)
• Easy installation, stable
• Model H for heavy flaps
• For upward-opening wooden flaps
• Soft-down function when closing
• Integrated damper against slamming
• Integrated catch mechanism for closed position
• Hold function in fully open position
• Tested for 50,000 opening and closing cycles
• Beam angle 80°
• Suitable for piano strap, rag strap or cup hinge
• Torque range 24.5 to 29.4 N·m per pair
• Black
• robust
• High brand quality from Sugatsune / LAMP®.

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office
• Lever arm of the flap fitting: nickel-plated

Assembly:

• The fastening is done using the six screws included in the scope of delivery (self-tapping pan head screw 3.5 x 15 mm)
• First, the torque of the flap must be calculated and checked so that the design fits the weight and height of the flap
• After that, the hinges must be installed correctly, and the flap must be able to open and close smoothly before installing the flap holder
• The flap support HDS-30HL-BL is attached to the left side of the carcase with screws ⌀ 3.5 x 15 mm according to the assembly drawing
• The flap holder has 3 mounting holes. The distance between the mounting holes is 126 mm (4-61/64″) and 28 mm (1-7/64″)
• The distance between the center of the fitting and the inner front edge is 35 mm (1-3/8″)
• The mounting plate is first only pre-fixed via the slotted hole on the flap
• The flap is then opened and closed so that the position of the mounting plate can be adjusted so that the movement runs smoothly and smoothly
• Finally, the mounting plate is screwed firmly over the round holes and all screws are checked for tightness. The distance between the mounting holes is 32 mm (1-17/64″) (for more details, see assembly drawing)

Dimensions:

• Length of flap fitting: 140 mm (5-33/64″)
• Width: 40 mm (1-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details , see technical drawing.

Material:

• The HDS-30HL-BL flap fittings are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece flap holder HDS-30HL-BL (180-104-083) made of metal and robust plastic, black, version: left
• 6 pieces self-tapping pan head screw 3.5 x 15 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 180-104-083
• Item number: HDS-30HL-BL
• GTIN number (EAN, UPC): 4510932024259

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Stable flap support for fold-ups, kitchen furniture and much more.

Version: left. Only the left side is included.

The HDS-30HL-WT () flap support is a soft-down flap holder for upward-opening wooden furniture flaps.

It slows down the closing movement of the flap and thus prevents it from slamming hard.

The integrated catch mechanism holds the flap securely to the body in the closed position.

In the open position, the fitting supports a stable end position with an opening angle of 80°.

The heavy-duty H version is intended for flaps with a torque of 24.5 to 29.4 N·m per pair and is therefore suitable for larger or heavier flaps.

The fitting can be combined with piano hinges, rag hinges or a suitable pot hinge and enables controlled, high-quality flap movement in furniture construction.

The high-quality HDS-30HL-WT flap fittings are perfect for, among other things:

• Furniture flaps
• Wooden flaps
• Cabinet flaps
• Wall cabinets
• Wall cabinets
• Living room furniture
• Flip up
• Kitchen furniture

Technical details:

• Version: left
• Weight: 300 g
• Load capacity (load capacity): 14.7 N (1.5 kp)
• Size: 140 mm (5-33/64″)
• Easy installation, stable
• Model H for heavy flaps
• For upward-opening wooden flaps
• Soft-down function when closing
• Integrated damper against slamming
• Integrated catch mechanism for closed position
• Hold function in fully open position
• Beam angle 80°
• Suitable for piano strap, rag strap or cup hinge
• Torque range 24.5 to 29.4 N·m per pair
• White
• robust
• High brand quality from Sugatsune / LAMP®.

Surface:

• White
• White finishes convey a clean and modern aesthetic
• The colour white reflects light effectively, making rooms look brighter and visually larger
• In addition, white objects are inconspicuous and easy to clean, which makes them particularly practical for everyday use
• Lever arm of the flap fitting: nickel-plated

Assembly:

• The fastening is done using the six screws included in the scope of delivery (self-tapping pan head screw 3.5 x 15 mm)
• First, the torque of the flap must be calculated and checked so that the design fits the weight and height of the flap
• After that, the hinges must be installed correctly, and the flap must be able to open and close smoothly before installing the flap holder
• The HDS-30HL-WT flap support is attached to the right side of the carcase with screws ⌀ 3.5 x 15 mm according to the assembly drawing.
• The flap holder has 3 mounting holes. The distance between the mounting holes is 126 mm (4-61/64″) and 28 mm (1-7/64″)
• The distance between the center of the fitting and the inner front edge is 35 mm (1-3/8″)
• The mounting plate is first only pre-fixed via the slotted hole on the flap.
• The flap is then opened and closed so that the position of the mounting plate can be adjusted so that the movement is smooth and smooth.
• Finally, the mounting plate is screwed firmly over the round holes and all screws are checked for tightness. The distance between the mounting holes is 32 mm (1-17/64″) (for more details, see assembly drawing)

Dimensions:

• Length of flap fitting: 140 mm (5-33/64″)
• Width: 40 mm (1-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details , see technical drawing.

Material:

• The HDS-30HL-WT flap fittings are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece flap holder HDS-30HL-WT (180-109-275) made of metal and robust plastic, white, version: left
• 6 pieces self-tapping pan head screw 3.5 x 15 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 180-109-275
• Item number: HDS-30HL-WT
• GTIN number (EAN, UPC): 4510932024273

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Stable flap support for fold-ups, kitchen furniture and much more.

Version: right. Only the right side is included.

The HDS-30HR-WT (180-109-274) flap support is a soft-down flap holder for upward-opening wooden furniture flaps.

It slows down the closing movement of the flap and thus prevents it from slamming hard.

The integrated catch mechanism holds the flap securely to the body in the closed position.

In the open position, the fitting supports a stable end position with an opening angle of 80°.

The heavy-duty H version is intended for flaps with a torque of 24.5 to 29.4 N·m per pair and is therefore suitable for larger or heavier flaps.

The fitting can be combined with piano hinges, rag hinges or a suitable pot hinge and enables controlled, high-quality flap movement in furniture construction.

The high-quality HDS-30HR-WT flap fittings are perfect for, among other things:

• Furniture flaps
• Wooden flaps
• Cabinet flaps
• Wall cabinets
• Wall cabinets
• Living room furniture
• Flip up
• Kitchen furniture

Technical details:

• Version: right
• Weight: 300 g
• Load capacity (load capacity): 14.7 N (1.5 kp)
• Size: 140 mm (5-33/64″)
• Easy installation, stable
• Model H for heavy flaps
• For upward-opening wooden flaps
• Soft-down function when closing
• Integrated damper against slamming
• Integrated catch mechanism for closed position
• Hold function in fully open position
• Beam angle 80°
• Suitable for piano strap, rag strap or cup hinge
• Torque range 24.5 to 29.4 N·m per pair
• White
• robust
• High brand quality from Sugatsune / LAMP®.

Surface:

• White
• White finishes convey a clean and modern aesthetic
• The colour white reflects light effectively, making rooms look brighter and visually larger
• In addition, white objects are inconspicuous and easy to clean, which makes them particularly practical for everyday use
• Lever arm of the flap fitting: nickel-plated

Assembly:

• The fastening is done using the six screws included in the scope of delivery (self-tapping pan head screw 3.5 x 15 mm)
• First, the torque of the flap must be calculated and checked so that the design fits the weight and height of the flap
• After that, the hinges must be installed correctly, and the flap must be able to open and close smoothly before installing the flap holder
• The HDS-30HR-WT flap support is attached to the right side of the carcase with screws ⌀ 3.5 x 15 mm according to the assembly drawing.
• The flap holder has 3 mounting holes. The distance between the mounting holes is 126 mm (4-61/64″) and 28 mm (1-7/64″)
• The distance between the center of the fitting and the inner front edge is 35 mm (1-3/8″)
• The mounting plate is first only pre-fixed via the slotted hole on the flap.
• The flap is then opened and closed so that the position of the mounting plate can be adjusted so that the movement is smooth and smooth.
• Finally, the mounting plate is screwed firmly over the round holes and all screws are checked for tightness. The distance between the mounting holes is 32 mm (1-17/64″) (for more details, see assembly drawing)

Dimensions:

• Length of flap fitting: 140 mm (5-33/64″)
• Width: 40 mm (1-37/64″)
• Depth: 20 mm (25/32″)

For more dimensions and details , see technical drawing.

Material:

• The HDS-30HR-WT flap fittings are made of metal and robust plastic (metal and plastic)
• The combination of metal and plastic provides an optimal balance of strength and flexibility, making the fittings robust and adaptable at the same time
• In addition, this combination of materials allows for improved aesthetics and functionality, as it offers both stability and a variety of design options

Included in delivery:

• 1 piece flap holder HDS-30HR-WT (180-109-274) made of metal and robust plastic, white, version: right
• 6 pieces self-tapping pan head screw 3.5 x 15 mm

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: 180-109-274
• Item number: HDS-30HR-WT
• GTIN number (EAN, UPC): 4510932024280

Manufacturer: Sugatsune / LAMP® (Japan)