Application:

Soft fixed castor for furniture, cabinets, roll containers, shelves, side tables and much more.

The fixed castor 08.12.150-1 from SISO serves as a robust castor for movable furniture, equipment and smaller transport structures.

The ⌀50 mm (1-31/32″) wheel with grey soft rubber tread allows for smooth and soil-friendly running and is particularly recommended for hard ground surfaces.

The fixed roller fork allows the wheel to move in one direction in a targeted manner and thus offers stable tracking.

The 45 x 45 mm (1-49/64″) screw-on plate enables compact and resilient attachment to furniture floors and substructures.

With a dynamic load capacity of 30 kg per castor, the fixed castor is also suitable for comparatively heavy furniture and mobile installations.

The combination of galvanized steel and a soft rubber tread combines a robust construction with pleasant running characteristics and is particularly suitable for furniture, shop and interior design.

The high-quality furniture castors 08.12.150-1 are perfect for, among other things:

• Serving trolley
• Devices
• Transport trolley
• Sales displays
• mobile furniture
• Furniture
• Cupboards
• Containers
• Shelves
• Side Tables

Technical details:

• Weight: 102.5 g (for 4 pieces: 410 g)
• Load capacity (load capacity): 120 kg (265 lbs) – for 4 pieces
• Diameter: ⌀50 mm (1-31/32″)
• Easy installation, stable
• Dynamic load capacity 30 kg
• Static load capacity 45 kg
• Fixed, non-swivelling roller fork
• Metal parts made of 1.5 mm thick steel
• Metal parts bright galvanized
• Grey tread made of soft rubber
• Suitable for hard floor surfaces
• Without brake
• Galvanized
• steel, robust
• High brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion
• Wheel core: black
• Tread: grey

Assembly:

• Fastening is done with wood screws ⌀4.5 to 5 mm (not included)
• First of all, the desired position of the fixed castor on the underside of the piece of furniture must be determined
• Then the 45 x 45 mm (1-49/64″) screw-on plate is aligned and the position of the four mounting holes is marked with a hole spacing of 30 x 30 mm (1-3/16″)
• In the case of wood and wood-based materials, the screw holes should be pre-drilled if necessary, depending on the material used
• The fixed castor is then firmly screwed to the furniture floor with four suitable wood screws through the ⌀5.5 mm (7/32″) mounting holes
• If there are several castors, the fixed castors must be aligned parallel to each other so that the piece of furniture runs cleanly straight ahead

Dimensions:

• Wheel diameter: ⌀50 mm (1-31/32″)
• Wheel width: 20 mm (25/32″)
• Height: 73 mm (2-7/8″)
• Bolt-on plate: 45 x 45 mm (1-49/64″)
• Plate thickness: 1.5 mm (1/16″)
• Hole spacing: 30 x 30 mm (1-3/16″)
• Mounting hole diameter: ⌀5.5 mm (7/32″)

For more dimensions and details , see technical drawing.

Material:

• The furniture castors 08.12.150-1 are made of robust steel
• Fork and bolt-on plate: sheet steel, 1.5 mm
• Surface of metal parts: bright galvanized
• Tread: Soft rubber
• Steel is ideal for furniture fittings and industrial fittings because it is both robust and durable, which ensures high resilience and long service life of the fittings

Included in delivery:

• 4 pieces fixed castor 08.12.150-1 made of robust steel, galvanized, 50 mm (1-31/32″)
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 08.12.150-1
• GTIN number (EAN, UPC): 5704866457538

Manufacturer: SISO Denmark

Application:

Robust plug-in hinge for small doors, maintenance hatches, electronics housings and much more.

Version: right. For right-hinged doors and flaps.

The compact B-56-R push-in hinge is used for the movable connection of small doors, flaps and housing parts.

Thanks to the two-part plug-in construction, the door can be lifted off the permanently mounted hinge part if necessary without having to unscrew the hinge.

The right-hand version allows targeted use with the appropriate design: right. For right-hinged doors and flaps. hinged doors and equipment flaps.

With a height of only 35 mm (1-3/8″), the hinge is particularly suitable for compact device housings, measuring instruments as well as electronic and technical equipment.

The cold-rolled steel sheet ensures a stable construction, while the galvanized and chromated surface protects the steel from corrosion.

When using two hinges mounted on top of each other, the B-56-R lift-out hinge is suitable for lightweight doors with a reference weight of 2 kg.

The high-quality B-56-R poster hinges are perfect for, among other things:

• Device Enclosures
• Audio Devices
• Communication Devices
• Measuring instruments
• Small doors
• Maintenance hatches
• Housing

Technical details:

• Version: right
• Weight: 8 g (for 2 pieces: 16 g)
• Load capacity (load capacity): 2 kg (5 lbs) – for 2 pieces
• Height: 35 mm (1-3/8″)
• Available in 2 versions: left (B-56-L) and right (B-56-R)
• Easy installation, stable
• Compact push-in hinge for small doors
• Detachable two-piece construction
• Door or flap can be removed without unscrewing the hinge
• Material thickness: 0.8 mm (1/32″)
• Surface treatment MFZn-C
• 4 mounting holes
• ⌀3 mm (1/8″) hinge pin
• Suitable for measuring instruments and technical devices
• RoHS10 compliant
• Galvanized, yellow
• steel, robust
• High brand quality from TAKIGEN®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The fastening is done with screws with approx. ⌀2.3 to 2.5 mm, preferably with a lens or round head (not included)
• The B-56-R plug-in hinge is positioned on the door or flap and the associated frame or housing
• Pay attention to the right-hand version so that the hinge is mounted to match a right-hinged door or equipment flap
• First, the positions of the four mounting holes must be marked according to the hole pattern
• Depending on the material used, suitable fastening holes or pre-drillings must then be drilled
• The two hinge halves are attached to the movable and fixed component with suitable screws
• The hinge axes of at least two hinges mounted on top of each other must align exactly
• Then the moving part is attached to the hinge pin from above
• To remove the door or flap, it is lifted and removed from the permanently mounted hinge part

Dimensions:

• Total height of lifting hinge B-56-R: 35 mm (1-3/8″)
• Overall width, unfolded: 24 mm (15/16″)
• Material thickness: 0.8 mm (1/32″)
• Vertical hole spacing: 19 mm (3/4″)
• Horizontal hole spacing: 14 mm (35/64″)
• Mounting holes: 4 x ⌀2.5 mm (3/32″)
• Hinge pin: ⌀3 mm (1/8″)
• Outer diameter of the hinge roller: approx. ⌀5 mm

For more dimensions and details , see technical drawing.

Material:

• The B-56-R flagship hinges are made of robust steel
• Steel is ideal for furniture fittings and industrial fittings because it is both robust and durable, which ensures high resilience and long service life of the fittings

Included in delivery:

• 2 pieces B-56-R (10150) plug-in hinge made of robust steel, galvanized, yellow, 35 mm (1-3/8″), version: right
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10150
• Item number: B-56-R

Manufacturer: TAKIGEN (Japan)

Application:

Robust plug-in hinge for small doors, maintenance hatches, electronics housings and much more.

Version: left. For left-hinged doors and flaps.

The compact push-in hinge B-56-L is used for the movable connection of small doors, flaps and housing parts.

Thanks to the two-part plug-in construction, the door can be lifted off the permanently mounted hinge part if necessary without having to unscrew the hinge.

The left-hand version enables targeted use with doors and equipment flaps hinged accordingly to the left.

With a height of only 35 mm (1-3/8″), the hinge is particularly suitable for compact device housings, measuring instruments as well as electronic and technical equipment.

The cold-rolled steel sheet ensures a stable construction, while the galvanized and chromated surface protects the steel from corrosion.

When using two hinges mounted on top of each other, the B-56-L lifting hinge is suitable for lightweight doors with a reference weight of 2 kg.

The high-quality B-56-L poster hinges are perfect for, among other things:

• Device Enclosures
• Audio Devices
• Communication Devices
• Measuring instruments
• Small doors
• Maintenance hatches
• Housing

Technical details:

• Version: left
• Weight: 8 g (for 2 pieces: 16 g)
• Load capacity (load capacity): 2 kg (5 lbs) – for 2 pieces
• Height: 35 mm (1-3/8″)
• Available in 2 versions: left (B-56-L) and right (B-56-R)
• Easy installation, stable
• Compact push-in hinge for small doors
• Detachable two-piece construction
• Door or flap can be removed without unscrewing the hinge
• Material thickness: 0.8 mm (1/32″)
• Surface treatment MFZn-C
• 4 mounting holes
• ⌀3 mm (1/8″) hinge pin
• Suitable for measuring instruments and technical devices
• RoHS10 compliant
• Galvanized, yellow
• steel, robust
• High brand quality from TAKIGEN®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The fastening is done with screws with approx. ⌀2.3 to 2.5 mm, preferably with a lens or round head (not included)
• The B-56-L push-in hinge is positioned on the door or flap and the associated frame or housing
• Pay attention to the left-hand version so that the hinge is mounted to match a left-hinged door or equipment flap
• First, the positions of the four mounting holes must be marked according to the hole pattern
• Depending on the material used, suitable fastening holes or pre-drillings must then be drilled
• The two hinge halves are attached to the movable and fixed component with suitable screws
• The hinge axes of at least two hinges mounted on top of each other must align exactly
• Then the moving part is attached to the hinge pin from above
• To remove the door or flap, it is lifted and removed from the permanently mounted hinge part

Dimensions:

• Total height of the lifting hinge B-56-L: 35 mm (1-3/8″)
• Overall width, unfolded: 24 mm (15/16″)
• Material thickness: 0.8 mm (1/32″)
• Vertical hole spacing: 19 mm (3/4″)
• Horizontal hole spacing: 14 mm (35/64″)
• Mounting holes: 4 x ⌀2.5 mm (3/32″)
• Hinge pin: ⌀3 mm (1/8″)
• Outer diameter of the hinge roller: approx. ⌀5 mm

For more dimensions and details , see technical drawing.

Material:

• The B-56-L flagship hinges are made of robust steel
• Steel is ideal for furniture fittings and industrial fittings because it is both robust and durable, which ensures high resilience and long service life of the fittings

Included in delivery:

• 2 pieces plug-in hinge B-56-L (10149) made of robust steel, galvanized, yellow, 35 mm (1-3/8″), version: left
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 10149
• Item number: B-56-L

Manufacturer: TAKIGEN (Japan)

Application:

Robust furniture base for sofas, armchairs, cabinets, chests of drawers, sideboards, tables, side tables and much more.

The furniture base 06.09.412-0 serves as a stable and at the same time visually discreet support for sofas, cabinets, tables and other pieces of furniture.

The robust round tube made of steel with ⌀30 mm (1-3/16″) ensures a resilient construction with a slim appearance.

The pre-assembled 60 x 60 mm (2-23/64″) mounting plate allows for easy and secure screwing to the underside of the furniture.

Thanks to the integrated glider, the height can be adjusted from 100 mm (3-15/16″) to up to 110 mm (4-21/64″) and thus compensate for unevenness of the floor.

The black plastic glider forms gentle contact with the ground and prevents the steel pipe from coming into direct contact with the floor surface.

The matt black surface gives the 06.09.412-0 furniture leg a modern, inconspicuous look and can be combined particularly well with contemporary furniture constructions.

The high-quality furniture legs 06.09.412-0 are perfect for, among other things:

• Seating
• TV Cabinet
• Sofas
• Armchair
• Cupboards
• Chests of drawers
• Sideboards
• Tables
• Side Tables

Technical details:

• Weight: 105 g (for 4 pieces: 420 g)
• Size: 100 mm (3-15/16″)
• Easy installation, stable
• Robust steel construction
• Round leg with ⌀30 mm (1-3/16″)
• Height adjustable from 100 mm (3-15/16″) up to 110 mm (4-21/64″) mm
• 10 mm (25/64″) height adjustment
• With integrated glider
• With black PP floor glider
• Square Mounting Plate 60 x 60 mm (2-23/64″)
• Mounting plate 1.5 mm thick
• Hole spacing 44 x 44 mm (1-47/64″)
• Four ⌀4 mm (5/32″) mounting holes
• Pre-assembled mounting plate
• Suitable for compensating for small uneven floors
• Simple cylindrical shape
• Suitable for furniture made of wood and wood-based materials
• Black
• steel, robust
• High brand quality from UMAXO®

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office

Assembly:

• Fastening is done with chipboard or wood screws 4 x 16 mm with lens or panhead head (not included)
• First, the desired position of the furniture base on the underside of the furniture must be determined and the 60 x 60 mm (2-23/64″) mounting plate must be aligned
• The four attachment points must then be marked with a hole spacing of 44 x 44 mm (1-47/64″) and pre-drilled to fit if necessary
• The furniture leg 06.09.412-0 is then fastened with suitable wood or chipboard screws via the four ⌀4 mm mounting holes of the mounting plate
• After setting up the piece of furniture, the slider is turned out or in until the furniture is stable and horizontal

Dimensions:

• Height: up to 110 mm (4-21/64″)
• Height adjustment: 10 mm (25/64″)
• Tube diameter: ⌀30 mm (1-3/16″)
• Mounting plate: 60 x 60 x 1.5 mm
• Hole spacing center/center: 44 x 44 mm (1-47/64″)
• Mounting holes: ⌀4 mm (5/32″)
• Outer diameter of glider: ⌀28 mm
• Bottom diameter of the glider: ⌀23.5 mm
• Total height of glider: 27 mm
• Set pin of the glider: 10 mm
• Hex nut: 13 mm

For more dimensions and details , see technical drawing.

Material:

• The furniture legs 06.09.412-0 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 4 pieces furniture base 06.09.412-0 made of robust steel, black, 100 mm (3-15/16″)
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 06.09.412-0
• GTIN number (EAN, UPC): 5704866511636

Manufacturer: SISO Denmark

Application:

Practical table leg angle for table frames, table legs, dining tables and much more.

Design: 1 hole for central mounting. This variant has 1 hole for central attachment

The table leg bracket 11.07.040-1 connects a table leg with two table frames running at right angles to each other.

Its angled shape pulls the frames together in the corner and increases the rigidity of the table frame.

The central mount allows the table leg to be attached via an M8 or M10 bolt.

Six screw holes on the sides ensure an even distribution of force in the wooden frames.

The 2 mm (5/64″) thick steel sheet offers a resilient and permanently dimensionally stable connection.

The galvanised surface protects the fitting from corrosion in the usual interior of furniture and enables unobtrusive installation on the inside of the table frame.

The high-quality table angle fittings 11.07.040-1 are perfect for, among other things:

• Kitchen Tables
• Desks
• Wooden tables
• Workbenches
• Table Frames
• Table frames
• Table legs
• Dining tables

Technical details:

• Design: 1 hole for central attachment
• Weight: 146 g (for 4 pieces: 584 g)
• Width: 126 mm (4-61/64″)
• Available in 13 different sizes and designs
• Easy installation, stable
• Made of 2 mm (5/64″) thick steel
• Galvanized surface
• Central mount for M8 or M10 bolts
• Concealed mounting on the inside of the table frame
• For right-angled rib corners
• Reinforced and profiled construction
• Suitable for detachable table leg connections
• Galvanized, yellow
• steel, robust
• High brand quality from UMAXO®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The fastening is done with e.g. 6 x wood screws or chipboard screws with pan head, 1 x M8 or M10 hanger bolt or threaded bolt (not included)
• The 11.07.040-1 table leg bracket has 6 mounting holes: ⌀5 mm (13/64″) and a central mounting opening: for M8 or M10 bolts
• The exact length of the wood screws must be adapted to the thickness of the table frame. The screws must not penetrate the outside of the frame
• First, the two table frames must be aligned at right angles to the table leg and temporarily fixed
• The frame angle is inserted from the inside into the corner between the two frames
• The fitting is then attached to the table frames through the six side holes with matching wood screws
• Then the M8 or M10 hanger bolt of the table leg is passed through the central opening and evenly tightened with a washer and a suitable nut
• Finally, the right-angled alignment of the table leg and the tight fit of all screw connections must be checked (for more details, see assembly drawing)

Dimensions:

• Total width of the table leg angle: 126 mm (4-61/64″)
• Height: 60 mm (2-23/64″)
• Center bridge width: 58 mm (2-9/32″)
• Depth of side legs: 48 mm (1-57/64″)

For more dimensions and details , see technical drawing.

Material:

• The table angle fittings 11.07.040-1 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 4 pieces table leg bracket 11.07.040-1 made of robust steel, galvanized, yellow, 126 mm (4-61/64″), version: 1 hole for central mounting
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 11.07.040-1 (alternative: 11.07.040-2)
• GTIN number (EAN, UPC): 5704866015769

Manufacturer: SISO Denmark

Application:

High-quality counterpart for magnetic flycatchers and much more.

Design: round. The round design offers ergonomic handling, reduces the risk of injury due to sharp edges and blends harmoniously into different furnishing styles.

The counter plate 22.01.118 made of nickel-plated steel serves as a metallic mating surface for magnetic latches and magnetic push-to-open fittings.

The counterpart 22.01.118 is suitable for all push magnetic closures.

Due to the compact format of only ⌀19 mm (3/4″), it can be mounted inconspicuously on wooden or metal doors.

The 3M adhesive layer on the back allows the counter plate to be mounted without drilling and without visible screws.

The 1.7 mm (1/16″) thin design of the 22.01.118 stop plate prevents gaps and makes it easier to adjust the front.

Adhesive mounting allows it to be used on smooth wood, metal and glass surfaces for a clean appearance.

Thanks to the nickel-plated surface, the counter plate 22.01.118 is corrosion resistant.

This ensures safe closing and opening without handles.

The high-quality counter plates 22.01.118 are perfect for, among other things:

• Furniture doors
• Glass doors
• Wooden fronts
• Metal fronts
• Magnetic closures
• Cabinet doors
• Push-to-Open Magnetic Closures
• Magnetic flycatcher

Technical details:

• Finish: round
• Weight: 1.1g (for 10 pieces: 11g)
• Diameter: ⌀19 mm (3/4″)
• Easy installation, stable
• Material thickness: 1.7 mm (1/16″)
• High corrosion resistance
• Round counter plate for magnetic latches
• Self-adhesive design
• 3M foam adhesive layer on the back
• Installation without drilling
• No visible mounting screws
• Suitable for wood, metal and glass
• Suitable for magnetic latches and magnetic closures
• Nickel-plated
• steel, robust
• High brand quality from UMAXO®

Surface:

• Nickel-plated
• Nickel-plated surfaces are characterized by their high corrosion resistance and durability, making them ideal for use in damp rooms such as kitchens and bathrooms
• They offer an elegant, shiny look that looks modern and timeless at the same time
• They are also easy to clean, as they make dirt and fingerprints less visible and are easy to clean

Assembly:

• The counterpart 22.01.118 is glued on and has no screw hole. A screw attachment is not necessary with this model
• First, the intended adhesive surface must be cleaned, degreased and dried completely
• The counter plate 22.01.118 is aligned on the inside of the door so that it sits exactly opposite the magnetic closure
• The magnetic strike plate is positioned in the middle opposite the magnetic flycatcher and pressed firmly onto the surface
• The function is then to be tested by closing the door and activating the push-to-open mechanism

Dimensions:

• Stop plate diameter: ⌀19 mm (3/4″)
• Thickness: 1.7 mm (1/16″)

For more dimensions and details , see technical drawing.

Material:

• The counter plates 22.01.118 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 10 pieces counter plate 22.01.118 made of robust steel, nickel-plated, 19 mm (3/4″), version: round
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 22.01.118 (alternative: 22.01.118-0)
• GTIN number (EAN, UPC): 5704866077880

Manufacturer: SISO Denmark

Application:

Robust strike plate for furniture lock, cabinet lock, screw-on lock, cabinet door and much more.

The locking bracket 14.01.064-1 serves as a counterpart for furniture locks (e.g. the SISO Furniture Lock 850) and enables a clean locking of furniture parts.

Thanks to the L-shape, the strike plate 14.01.064-1 can be mounted on the carcass, door hinge or drawer area.

The bolt of the furniture lock engages with the locking angle and keeps the door or drawer reliably closed.

The nickel-plated steel surface ensures an inconspicuous look and good protection in furniture construction.

The compact design is particularly suitable for cabinets, drawers, display cabinets and other wooden furniture with small furniture locks.

The strike plate 14.01.064-1 is a simple, stable and space-saving solution if a furniture lock is to be locked securely and precisely.

The high-quality locking brackets 14.01.064-1 are perfect for, among other things:

• Drawer
• Furniture flap
• Wooden furniture
• Display case
• Chest of drawers
• Office furniture
• Furniture lock
• Cabinet lock
• Screw-on lock
• Cabinet door

Technical details:

• Weight: 5.6 g (for 8 pieces: 44.8 g)
• Size: 30 mm (1-3/16″)
• Easy installation, stable
• L-shaped striking plate for furniture locks
• Suitable for SISO Furniture Lock 850
• Compact design
• With two mounting holes
• Suitable for wood and furniture constructions
• Can be used for cabinet doors and drawers
• Easy screw mounting
• Discreet look in the interior of the furniture
• Nickel-plated
• steel, robust
• High brand quality from UMAXO®

Surface:

• Nickel-plated
• Nickel-plated surfaces are characterized by their high corrosion resistance and durability, making them ideal for use in damp rooms such as kitchens and bathrooms
• They offer an elegant, shiny look that looks modern and timeless at the same time
• They are also easy to clean, as they make dirt and fingerprints less visible and are easy to clean

Assembly:

• Fastening is done with countersunk wood screws 3 x 12 mm (not included)
• The closing angle is aligned with the appropriate counter-position to the furniture bolt
• First, the position must be marked with the furniture part closed
• Then the mounting holes are pre-drilled with approx. ⌀2 mm if necessary
• The closing bracket is then fastened with two countersunk wood screws or countersunk chipboard screws
• Finally, it must be checked whether the bolt of the furniture lock engages cleanly in the locking angle and whether the furniture part remains reliably closed

Dimensions:

• Closing Angle Length: 30 mm (1-3/16″)
• Width: 16 mm (5/8″)
• Height (leg height): 9 mm (23/64″)
• Hole spacing: 21 mm (53/64″)
• Distance from hole center to bottom edge: 6 mm (15/64″)
• 2 mounting holes: ⌀3.5 mm (9/64″)
• Material thickness: 1 mm (3/64″)
• Radius at the small corners: R2
• Radius at curved area: R5

For more dimensions and details , see technical drawing.

Material:

• The locking brackets 14.01.064-1 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 8 pcs locking bracket 14.01.064-1 made of robust steel, nickel-plated, 30 mm (1-3/16″)
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.01.064-1
• GTIN number (EAN, UPC): 5704866453585

Manufacturer: SISO Denmark

Application:

Foldable table leg attachment for low tables, coffee tables, wooden table legs and much more.

The table leg folding fitting B205-KTL-BK is a compact metal fitting for folding table legs on low tables with leg lengths of up to 300 mm (11-13/16″).

The table leg attachment B205-KTL-BK connects the table leg stably to the table top and allows the leg to be folded in a space-saving manner.

The integrated lever makes the folding mechanism easy to unlock and operate.

The B205-KTL-BK folding table leg fitting is particularly suitable for furniture that needs to be stored flat or space-saving after use.

The sturdy steel construction ensures a reliable connection between leg and tabletop.

The fitting is a practical solution for low tables and flexible furniture constructions with foldable table legs indoors.

The high-quality table leg folding fittings B205-KTL-BK are perfect for, among other things:

• Folding legs
• mobile furniture
• Space-saving furniture
• low tables
• Coffee Tables
• Wooden Table Legs

Technical details:

• Weight: 200 g
• Size: 71 mm (2-51/64″)
• Available in 2 surface colours: yellow galvanised or black
• Easy installation, stable
• suitable for low tables
• Compact design
• Stable metal mechanism
• Material thickness: 2.6 mm (7/64″)
• Table leg can be folded by lever
• suitable for table legs from approx. 50 x 50 mm (1-31/32″)
• Suitable for table legs up to approx. 300 mm (11-13/16″) high
• Fastening via several screw points
• Black
• steel, robust
• High brand quality from Kojima (Japan)

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office

Assembly:

• The fastening is done with a semi-round head screw ⌀3.5 mm. Flat round head screws are not suitable (not included)
• A gap of approx. 0.5 mm must be provided between the table top and the table leg. Without this small distance, the fitting cannot lock correctly
• The table leg attachment has 11 mounting holes with a diameter of ⌀4.5 mm (11/64″)
• The table leg folding fitting B205-KTL-BK is first attached to the table leg with five fastening screws when locked
• Then the leg is fixed to the tabletop at four marked attachment points with screws
• Then the leg is folded in and the two other attachment points are screwed together (for more details, see assembly drawing)

Dimensions:

• Length of the table leg folding fitting: 71 mm (2-51/64″)
• Depth: 63 mm (2-31/64″)
• Width: 53 mm (2-3/32″)

For more dimensions and details , see technical drawing.

Material:

• The table leg hinged fittings B205-KTL-BK are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 4 pieces table leg folding fitting B205-KTL-BK made of robust steel, black
• This item does not include mounting screws

Watch the product video:

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: B205-KTL-BK
• GTIN number (EAN, UPC): 0618455525476

Manufacturer: Kojima (Japan)

Application:

Foldable table leg attachment for low tables, coffee tables, wooden table legs and much more.

The table leg folding fitting B205-KTL-BK is a compact metal fitting for folding table legs on low tables with leg lengths of up to 300 mm (11-13/16″).

The table leg attachment B205-KTL-BK connects the table leg stably to the table top and allows the leg to be folded in a space-saving manner.

The integrated lever makes the folding mechanism easy to unlock and operate.

The B205-KTL-BK folding table leg fitting is particularly suitable for furniture that needs to be stored flat or space-saving after use.

The sturdy steel construction ensures a reliable connection between leg and tabletop.

The fitting is a practical solution for low tables and flexible furniture constructions with foldable table legs indoors.

The high-quality table leg folding fittings B205-KTL-BK are perfect for, among other things:

• Folding legs
• mobile furniture
• Space-saving furniture
• low tables
• Coffee Tables
• Wooden Table Legs

Technical details:

• Weight: 200 g
• Size: 71 mm (2-51/64″)
• Available in 2 surface colours: yellow galvanised or black
• Easy installation, stable
• suitable for low tables
• Compact design
• Stable metal mechanism
• Material thickness: 2.6 mm (7/64″)
• Table leg can be folded by lever
• suitable for table legs from approx. 50 x 50 mm (1-31/32″)
• Suitable for table legs up to approx. 300 mm (11-13/16″) high
• Fastening via several screw points
• Galvanized, yellow
• steel, robust
• High brand quality from Kojima (Japan)

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The fastening is done with a semi-round head screw ⌀3.5 mm. Flat round head screws are not suitable (not included)
• A gap of approx. 0.5 mm must be provided between the table top and the table leg. Without this small distance, the fitting cannot lock correctly
• The table leg attachment has 11 mounting holes with a diameter of ⌀4.5 mm (11/64″)
• The table leg folding fitting B205-KTL-BK is first attached to the table leg with five fastening screws when locked
• Then the leg is fixed to the tabletop at four marked attachment points with screws
• Then the leg is folded in and the two other attachment points are screwed together (for more details, see assembly drawing)

Dimensions:

• Length of the table leg folding fitting: 71 mm (2-51/64″)
• Depth: 63 mm (2-31/64″)
• Width: 53 mm (2-3/32″)

For more dimensions and details , see technical drawing.

Material:

• The table leg hinged fittings B205-KTL-BK are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 4 pieces table leg hinged fitting B205-KTL-BK made of robust steel, galvanized, yellow
• This item does not include mounting screws

Watch the product video:

Additional information:

• Download assembly instructions

Manufacturer’s part numbers:

• Article ID: B205-KTL-BK
• GTIN number (EAN, UPC): 0618455525476

Manufacturer: Kojima (Japan)

Weight: 115 g

Manufacturer’s reference number:

• Article ID: ADZ-M12
• Item number: 200-141-240
• GTIN number (EAN, UPS): 4510932097154

Included in delivery:

• 1 piece washer for leveling gliders, steel ADZ-M12

Further information:

• Manufacturer’s catalog page

Manufacturer: von Sugatsune / LAMP® (Japan)