Application:

Screw-on plate, for furniture feet, furniture castors, machine feet, cabinet legs, sofa feet and much more.

The AP36-M12 top plate is used to fasten furniture feet, leveling feet, etc. under furniture, sofas, appliances, machines, etc.

Also suitable for replacing defective furniture feet, furniture castors or sofa feet.

The glossy polished surface gives the mounting plate a high-quality look, while the stainless steel V2A ensures good corrosion resistance.

The high-quality mounting plates 200-140-504 are perfect for:

• Feet
• Leveling feet
• Cabinet castors
• Articulated feet
• Legs
• Adjustable feet
• Containers
• Furniture feet
• Furniture castors
• Machine feet
• Cabinet legs
• Sofa legs

Technical details:

• Weight: 19 g
• Diameter: ⌀36 mm (1-27/64″)
• threaded M12
• round
• with three mounting holes
• robust
• stable
• glossy polished
• weatherproof
• Stainless (corrosion-free)
• high brand quality of Sugatsune / LAMP®

Surface:

• Glossy polished

Assembly:

• The screw-on plate has three mounting holes with a diameter of ⌀4.2 mm (11/64″) and is attached to the lower surface of the piece of furniture with three screws (not included)
• The furniture feet or furniture castors, which are equipped with a screw, are then screwed into the thread of the AP36-M12 mounting plate and tightened

Dimensions:

• Mounting plate diameter: ⌀36 mm (1-27/64″)
• Height: 11.5 mm (29/64″)
• Thread: M12
• Mounting hole diameter: ⌀4.2 mm (11/64″)
• Threaded nut diameter: ⌀13.9 mm (35/64″)

For more dimensions and details, see technical drawing.

Material:

• The AP36-M12 mounting plates are made of stainless steel (V2A)

Included in delivery:

• 4 pieces AP36-M12 mounting plate made of stainless steel, glossy polished

Manufacturer’s part numbers:

• Article ID: 200-140-504
• Item number: AP36-M12
• EAN Number: 4510932005111

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Mounting plate, for furniture feet, furniture castors, machine feet, cabinet legs, sofa feet and much more.

The AD-555-28 mounting plate is used to fasten furniture feet, leveling feet, etc. under furniture, sofas, appliances, machinery, etc.

Also suitable for replacing defective furniture feet, furniture castors or sofa feet.

The galvanized surface of the top plate protects it from rust and corrosion.

The compact height of only 9 mm allows installation even with low ground clearance.

For indoor and weather-protected outdoor use thanks to corrosion-resistant zinc chromate coating.

The compact round plate enables a space-saving and resilient thread holder for furniture feet and furniture castors with W3/8 threaded pins.

The high-quality 200-140-075 bolt-on plates are perfect for:

• Feet
• Leveling feet
• Cabinet castors
• Articulated feet
• Legs
• Adjustable feet
• Containers
• Furniture feet
• Furniture castors
• Machine feet
• Cabinet legs
• Sofa legs

Technical details:

• Weight: 15 g
• Size: 28 mm (1-7/64″)
• Compatible with all furniture feet and castors with Whitworth thread W 3/8
• round
• Compact design for confined installation situations
• with three mounting holes
• stable
• Suitable for feet and castors with W3/8 threaded pins
• Zinc chromate
• Zinc alloy
• ZDC
• high brand quality of Sugatsune / LAMP®

Surface:

• Zinc chromate

Assembly:

• The top plate has three mounting holes with the diameter (⌀d2) ⌀3.2 mm (1/8″) and is attached to the lower surface of the piece of furniture with three screws (not included)
• The furniture feet or furniture castors, which are equipped with a screw, are then screwed into the thread of the AD-555-28 mounting plate and tightened

Dimensions:

• Plate Diameter (⌀D): ⌀28 mm (1-7/64″)
• Height (H): 9 mm (23/64″)
• Thread (d1): W3/8
• Mounting hole diameter (⌀d2): ⌀3.2 mm (1/8″)
• Distance between center point and mounting hole (⌀P): ⌀20 mm (25/32″)
• Material thickness (t): 2.7 mm (7/64″)

For more dimensions and details, see technical drawing.

Material:

• The AD-555-28 add-on plates are made of solid zinc alloy (ZDC)

Included in delivery:

• 4 pieces of fitting plate AD-555-28 made of solid zinc alloy, zinc chromate
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 200-140-075
• Item number: AD-555-28
• EAN Number: 4510932034692

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Practical table leg angle for table frames, table legs, dining tables and much more.

Design: 1 hole for central mounting. This variant has 1 hole for central attachment

The table leg bracket 11.07.040-1 connects a table leg with two table frames running at right angles to each other.

Its angled shape pulls the frames together in the corner and increases the rigidity of the table frame.

The central mount allows the table leg to be attached via an M8 or M10 bolt.

Six screw holes on the sides ensure an even distribution of force in the wooden frames.

The 2 mm (5/64″) thick steel sheet offers a resilient and permanently dimensionally stable connection.

The galvanised surface protects the fitting from corrosion in the usual interior of furniture and enables unobtrusive installation on the inside of the table frame.

The high-quality table angle fittings 11.07.040-1 are perfect for, among other things:

• Kitchen Tables
• Desks
• Wooden tables
• Workbenches
• Table Frames
• Table frames
• Table legs
• Dining tables

Technical details:

• Design: 1 hole for central attachment
• Weight: 146 g (for 4 pieces: 584 g)
• Width: 126 mm (4-61/64″)
• Available in 13 different sizes and designs
• Easy installation, stable
• Made of 2 mm (5/64″) thick steel
• Galvanized surface
• Central mount for M8 or M10 bolts
• Concealed mounting on the inside of the table frame
• For right-angled rib corners
• Reinforced and profiled construction
• Suitable for detachable table leg connections
• Galvanized, yellow
• steel, robust
• High brand quality from UMAXO®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The fastening is done with e.g. 6 x wood screws or chipboard screws with pan head, 1 x M8 or M10 hanger bolt or threaded bolt (not included)
• The 11.07.040-1 table leg bracket has 6 mounting holes: ⌀5 mm (13/64″) and a central mounting opening: for M8 or M10 bolts
• The exact length of the wood screws must be adapted to the thickness of the table frame. The screws must not penetrate the outside of the frame
• First, the two table frames must be aligned at right angles to the table leg and temporarily fixed
• The frame angle is inserted from the inside into the corner between the two frames
• The fitting is then attached to the table frames through the six side holes with matching wood screws
• Then the M8 or M10 hanger bolt of the table leg is passed through the central opening and evenly tightened with a washer and a suitable nut
• Finally, the right-angled alignment of the table leg and the tight fit of all screw connections must be checked (for more details, see assembly drawing)

Dimensions:

• Total width of the table leg angle: 126 mm (4-61/64″)
• Height: 60 mm (2-23/64″)
• Center bridge width: 58 mm (2-9/32″)
• Depth of side legs: 48 mm (1-57/64″)

For more dimensions and details , see technical drawing.

Material:

• The table angle fittings 11.07.040-1 are made of robust steel
• Steel is ideal for furniture fittings because it is both robust and durable, which ensures high resilience and long life of the fittings

Included in delivery:

• 4 pieces table leg bracket 11.07.040-1 made of robust steel, galvanized, yellow, 126 mm (4-61/64″), version: 1 hole for central mounting
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 11.07.040-1 (alternative: 11.07.040-2)
• GTIN number (EAN, UPC): 5704866015769

Manufacturer: SISO Denmark

Application:

Drive-in groove, for screw, sofa base, furniture castor, prefabricated house construction and much more.

The SC-124-10 thread is used to fasten screws, furniture feet, leveling feet, etc. under furniture, sofas, appliances, machines, etc.

The SC-124-10 Impact Nut can also be used to attach screws, Allen screws, or equipment to a wooden wall or climbing wall.

The high-quality 200-041-283 impact nuts are perfect for:

• Socket screw
• Climbing Hold
• Leveling feet
• Cabinet castors
• Legs
• Adjustable feet
• Containers
• Wardrobe base
• Screw
• Sofa base
• Furniture Roll
• Prefabricated house construction

Technical details:

• Weight: 8.8 g
• Size: 25.5 mm (1.1″)
• with female thread M10
• with four stable impact tips
• stable
• zinc-plated, yellow
• Steel
• robust
• high brand quality of Sugatsune / LAMP®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The top plate has four impact tips
• First of all, a hole with a diameter of ⌀12 mm (15/32″) must be drilled in the furniture floor or wooden wall at the point where the fold thread is to be placed
• Depending on the specific application, the SC-124-10 drive nut is driven into the plate from the back or from the front
• Screws, furniture feet or furniture castors equipped with a screw are then screwed into the thread of the SC-124-10 mounting plate and tightened

Dimensions:

• Nut Diameter (⌀D2): ⌀11.6 mm (29/64″)
• Base diameter (⌀D1): ⌀25.5 mm (1″)
• Height (H): 13 mm (33/64″)
• Thread (d): M10

For further dimensions and details
see technical drawing
.

Material:

• The SC-124-10 drive nuts are made of sturdy steel

Included in delivery:

• 4 pieces drive nut SC-124-10 made of robust steel, galvanized, yellow

Manufacturer’s part numbers:

• Article ID: 200-041-283
• Item number: SC-124-10
• EAN Number: 4510932034678

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Drive-in groove, for screws, sofa feet, cabinet feet, furniture castors, prefabricated house construction and much more.

The SC-124-8 thread is used to fasten screws, furniture feet, leveling feet, etc. under furniture, sofas, appliances, machines, etc.

The SC-124-8 Impact Nut can also be used to attach screws, Allen screws or equipment to a wooden wall or climbing wall.

The high quality impact nuts 200-041-282 are perfect for:

• Socket screw
• Climbing Hold
• Leveling feet
• Cabinet castors
• Legs
• Adjustable feet
• Containers
• Screw
• Sofa base
• Wardrobe base
• Furniture Roll
• Prefabricated house construction

Technical details:

• Weight: 6.6 g
• Size: 22.2 mm (0.9″)
• with female thread M8
• with four stable impact tips
• stable
• zinc-plated, yellow
• Steel
• robust
• high brand quality of Sugatsune / LAMP®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The top plate has four impact tips
• First of all, a hole with a diameter of ⌀11 mm (7/16″) must be drilled in the furniture floor or wooden wall at the point where the weave thread is to be placed
• Depending on the specific application, the SC-124-8 drive nut is driven into the plate from the back or the front
• Screws, furniture feet or furniture castors equipped with a screw are then screwed into the thread of the SC-124-8 mounting plate and tightened

Dimensions:

• Nut diameter (⌀D2): ⌀9.9 mm (25/64″)
• Base diameter (⌀D1): ⌀22.2 mm (7/8″)
• Height (H): 11 mm (7/16″)
• Thread (d): M8

For further dimensions and details
see technical drawing
.

Material:

• The SC-124-8 drive nuts are made of sturdy steel

Included in delivery:

• 4 pieces of drive nut SC-124-8 made of robust steel, galvanized, yellow

Manufacturer’s part numbers:

• Article ID: 200-041-282
• Item number: SC-124-8
• EAN Number: 4510932034661

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Drive-in groove, for screws, sofa feet, cabinet feet, furniture castors, prefabricated house construction and much more.

The SC-124-6 thread is used to fasten screws, furniture feet, leveling feet, etc. under furniture, sofas, appliances, machines, etc.

The SC-124-6 Impact Nut can also be used to attach screws, Allen screws, or equipment to a wooden wall or climbing wall.

The high-quality 200-041-281 drive nuts are perfect for:

• Socket screw
• Climbing Hold
• Leveling feet
• Cabinet castors
• Legs
• Adjustable feet
• Containers
• Screw
• Sofa base
• Wardrobe base
• Furniture Roll
• Prefabricated house construction

Technical details:

• Weight: 3.5 g
• Size: 19 mm (0.8″)
• with female thread M6
• with four stable impact tips
• stable
• zinc-plated, yellow
• Steel
• robust
• high brand quality of Sugatsune / LAMP®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The top plate has four impact tips
• First of all, a hole with a diameter of ⌀8 mm (5/16″) must be drilled in the furniture floor or wooden wall at the point where the weft thread is to be placed
• Depending on the specific application, the SC-124-6 drive nut is driven into the plate from the back or from the front
• Screws, furniture feet or furniture castors equipped with a screw are then screwed into the thread of the SC-124-6 mounting plate and tightened

Dimensions:

• Nut Diameter (⌀D2): ⌀7.5 mm (19/64″)
• Base diameter (⌀D1): ⌀19 mm (3/4″)
• Height (H): 9 mm (23/64″)
• Thread (d): M6

For further dimensions and details
see technical drawing
.

Material:

• The SC-124-6 drive nuts are made of robust steel

Included in delivery:

• 4 pieces of drive nut SC-124-6 made of robust steel, galvanized, yellow

Manufacturer’s part numbers:

• Article ID: 200-041-281
• Item number: SC-124-6
• EAN Number: 4510932034654

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Drive-in groove, for screws, sofa feet, cabinet feet, furniture castors, prefabricated house construction and much more.

The SC-124-4 weave thread is used to fasten screws, furniture feet, leveling feet, etc. under furniture, sofas, appliances, machines, etc.

The SC-124-4 Impact Nut can also be used to attach screws, Allen screws or equipment to a wooden wall or climbing wall.

The high quality impact nuts 200-041-280 are perfect for:

• Socket screw
• Climbing Hold
• Leveling feet
• Cabinet castors
• Legs
• Adjustable feet
• Containers
• Screw
• Sofa base
• Wardrobe base
• Furniture Roll
• Prefabricated house construction

Technical details:

• Weight: 2.1 g
• Size: 15 mm (0.6″)
• with female thread M4
• with four stable impact tips
• stable
• zinc-plated, yellow
• Steel
• robust
• high brand quality of Sugatsune / LAMP®

Surface:

• Galvanized, yellow
• The galvanized surface protects against rust and corrosion

Assembly:

• The top plate has four impact tips
• First of all, a hole with a diameter of ⌀6 mm (15/64″) must be drilled in the furniture floor or wooden wall at the point where the weave thread is to be placed
• Depending on the specific application, the SC-124-4 drive nut is driven into the plate from the back or from the front
• Screws, furniture feet or furniture castors equipped with a screw are then screwed into the thread of the SC-124-4 mounting plate and tightened

Dimensions:

• Nut Diameter (⌀D2): ⌀5.6 mm (7/32″)
• Base diameter (⌀D1): ⌀15 mm (19/32″)
• Height (H): 8 mm (5/16″)
• Thread (d): M4

For further dimensions and details
see technical drawing
.

Material:

• The SC-124-4 drive nuts are made of sturdy steel

Included in delivery:

• 4 pieces drive nut SC-124-4 made of robust steel, galvanized, yellow

Manufacturer’s part numbers:

• Article ID: 200-041-280
• Item number: SC-124-4
• EAN Number: 4510932034647

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Drive-in groove, for screw, sofa base, cabinet base, furniture castor, prefabricated house construction, climbing handle and much more.

The 3006805 thread is used to fasten screws, furniture feet, leveling feet, etc. under furniture, sofas, appliances, machines, etc.

The 3006805 nut can also be used to attach screws, Allen screws or equipment to a wooden wall or to a climbing wall.

The high quality 3006805 drive nuts are perfect for:

• Socket screw
• Leveling feet
• Cabinet castors
• Legs
• Adjustable feet
• Containers
• Screw
• Sofa base
• Wardrobe base
• Furniture Roll
• Prefabricated house construction
• Climbing Hold

Technical details:

• Weight: 5.2 g
• Size: 12 mm (0.5″)
• with female thread M10
• with four stable impact tips
• stable
• galvanized
• Steel
• robust
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• The top plate has four impact tips
• First of all, a hole with a diameter of ⌀13 mm (33/64″) must be drilled in the furniture floor or wooden wall at the point where the impact thread is to be placed
• Depending on the specific application, the drive nut is 3006805 driven into the plate from the back or from the front
• Screws, furniture feet or furniture castors equipped with a screw are then screwed into the thread of the fastening plate 3006805 and tightened

Dimensions:

• Nut diameter: ⌀12 mm (15/32″)
• Width: 22.5 mm (57/64″)
• Depth: 11 mm (7/16″)
• Thread: M10
• Impact tip length: ⌀7.5 mm (19/64″)

For further dimensions and details
see technical drawing
.

Material:

• The 3006805 impact nuts are made of robust steel

Included in delivery:

• 4 pieces of impact nut 3006805 made of robust steel, galvanized

Manufacturer’s part numbers:

• Article identification number: 3006805
• EAN Number: 8432393103532

Manufacturer: EMUCA

4 screw nuts with M6 female thread and four impact tips, screw-on plate, made of robust steel, surface: galvanized, 3007005, size: 8 mm (0.4″)

Application:

Drive-in groove, for screw, sofa base, cabinet base, furniture castor, prefabricated house construction, climbing handle and much more.

The 3007005 thread is used to fasten screws, furniture feet, leveling feet, etc. under furniture, sofas, appliances, machines, etc.

The 3007005 nut can also be used to attach screws, Allen screws or equipment to a wooden wall or climbing wall.

The high-quality 3007005 impact nuts are perfect for:

• Socket screw
• Leveling feet
• Cabinet castors
• Legs
• Adjustable feet
• Containers
• Screw
• Sofa base
• Wardrobe base
• Furniture Roll
• Prefabricated house construction
• Climbing Hold

Technical details:

• Peso: 1.13 g
• Size: 8 mm (0.4″)
• with female thread M6
• with four stable impact tips
• stable
• galvanized
• Steel
• robust
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• The top plate has four impact tips
• First, a hole with a diameter of ⌀9 mm (23/64″) must be drilled in the furniture floor or wooden wall at the point where the weft thread is to be placed
• Depending on the specific application, the drive nut is 3007005 driven into the plate from the back or from the front
• Screws, furniture feet or furniture castors equipped with a screw are then screwed into the thread of the fastening plate 3007005 and tightened

Dimensions:

• Nut diameter: ⌀8 mm (5/16″)
• Width: 17 mm (43/64″)
• Depth: 8 mm (5/16″)
• Thread: M6
• Impact tip length: ⌀6.5 mm (1/4″)

For further dimensions and details
see technical drawing
.

Material:

• The 3007005 impact nuts are made of robust steel

Included in delivery:

• 4 pieces of drive nut 3007005 made of robust steel, galvanized

Manufacturer’s part numbers:

• Article identification number: 3007005
• EAN Number: 8432393103556

Manufacturer: EMUCA

“

Application:

Mounting plate, for furniture feet, furniture castors, machine feet, cabinet legs, sofa feet and much more.

The AD-561 mounting plate is used to fasten furniture feet, leveling feet, etc. under furniture, sofas, appliances, machines, etc.

Also suitable for replacing defective furniture feet, furniture castors or sofa feet.

The galvanized surface of the top plate protects it from rust and corrosion.

The high-quality 200-140-068 mounting plates are perfect for:

• Feet
• Leveling feet
• Cabinet castors
• Articulated feet
• Legs
• Adjustable feet
• Containers
• Furniture feet
• Furniture castors
• Machine feet
• Cabinet legs
• Sofa feet

Technical details:

• Weight: 30 g
• Size: 60 mm (2.4″)
• threaded M8
• Shape: rectangular
• with two mounting holes
• stable
• Zinc chromate, yellow
• Zinc alloy
• ZDC
• high brand quality of Sugatsune / LAMP®

Surface:

• Zinc chromate, yellow

Assembly:

• The top plate has two mounting holes with a diameter of ⌀5.4 mm (7/32″) and is attached to the lower surface of the furniture with three screws (not included)
• The distance between the mounting holes is 40 mm (1-37/64″)
• A hole with a diameter of ⌀8 mm (5/16″) must be drilled in the bottom of the body
• The furniture feet or furniture castors, which are equipped with a screw, are then screwed into the thread of the AD-561 fastening plate and tightened

Dimensions:

• Plate Length: 60 mm (2-23/64″)
• Width: 20 mm (25/32″)
• Thread: M8
• Mounting hole diameter: 5.4 mm (7/32″)
• Material thickness (t): 2.9 mm (7/64″)

For further dimensions and details
see technical drawing
.

Material:

• The AD-561 add-on plates are made of solid zinc alloy (ZDC)

Included in delivery:

• 4 pieces AD-561 fitting plate made of solid zinc alloy, zinc chromate, yellow

Manufacturer’s part numbers:

• Article ID: 200-140-068
• Item number: AD-561
• EAN Number: 4510932840101

Manufacturer: Sugatsune / LAMP® (Japan)