Application:

Robust marine hinge for ship hatches, deck hatches, floor flaps, maintenance hatches and much more.

The marine hinge B-1013 (13343) is used for the movable connection of hatches, flaps and covers, especially in shipbuilding and in areas at risk of corrosion.

Due to its design with two rotation axes, the hinge allows a large opening angle of up to 180°.

The special joint geometry ensures that the flap can move around the adjacent edge in a controlled manner when opened.

The robust SUS316 stainless steel offers very good corrosion resistance and is therefore particularly suitable for applications with humidity and saline environments.

The flat design with only a few protruding parts reduces annoying protrusions and also allows use on floor flaps.

The four countersunk holes allow for a stable bolting to the flap and frame, making the B-1013 a rugged solution for demanding flap and hatch applications.

The high-quality marine hinges B-1013 are perfect for, among other things:

• Cover hoods
• Fairing flaps
• Ship hatches
• Deck hatches
• Bottom flaps
• Maintenance hatches

Technical details:

• Weight: 70 g (for 2 pieces: 140 g)
• Size: 70 mm (2-3/4″)
• Easy installation, stable
• Two-axis joint design
• Beam angle up to 180°
• Made of corrosion-resistant SUS316 stainless steel
• Particularly suitable for the marine sector
• Flat and compact design
• Only small protrusions on the surface
• Designed for M5 countersunk screws
• Can be used for right and left
• Glossy polished
• Weather-resistant, rust-free or corrosion-resistant
• High brand quality from TAKIGEN®

Surface:

• Glossy polished
• Glossy polished surfaces on furniture fittings and components improve aesthetics and give them a high-quality, elegant appearance
• In addition, the smooth surface makes cleaning easier and ensures less adhesion of dirt and dirt

Assembly:

• Fastening is done with 4 x M5 countersunk screws (not included)
• The hatch hinge B-1013 (13343) has four mounting holes with countersink
• First of all, the positions of the two-axis hinge on the flap and frame must be determined and the four mounting holes must be prepared according to the hole pattern
• Hole spacing is 2-13/64″ (56 mm) horizontally and 1-1/32″ (26 mm) vertically
• The hinge is then positioned so that the two articulated axes can move freely and the flap does not collide with the frame when opened
• The marine hinge B-1013 is then fastened with four M5 countersunk screws
• The screw length is to be selected according to the material thickness of the flap or frame
• Finally, the flap must be moved up to 180° over the entire opening area and checked for free, stress-free function

Dimensions:

• Overall width: 70 mm (2-3/4″)
• Overall height: 40 mm (1-37/64″)
• Plate thickness: 4 mm (5/32″)
• Hole spacing horizontal: 56 mm (2-13/64″)
• Hole spacing vertical: 26 mm (1-1/32″)
• Mounting holes: 4 x ⌀6.5 mm
• Mounting Hole Lowering: ⌀10 mm (25/64″)

For more dimensions and details , see technical drawing.

Material:

• The marine hinges B-1013 are made of high-quality stainless steel SUS316 (1.4401 or V4A)
• SUS316 stainless steel (also known as V4A) is a stainless steel with excellent corrosion resistance
• Due to their resistance to chlorine-containing substances, fittings made of SUS316 stainless steel are used for use near the coast and are expressly recommended

Included in delivery:

• 2 pieces marine hinge B-1013 (13343) made of high quality stainless steel SUS316, glossy polished, 70 mm (2-3/4″)
• This item does not include mounting screws

Manufacturer’s part numbers:

• Article ID: 13343
• Item number: B-1013

Manufacturer: TAKIGEN (Japan)

Application:

Wall double hooks for wardrobe, bathroom, outdoor area, swimming pool and much more.

The EU-72 coat hooks are made of extra thick 8mm SUS 316 stainless steel, which ensures durability and longevity.

The double hook has two hook ends to hang up to three items. E.g. backpack and two pieces of clothing.

The EU-72 double wall hook is also very suitable for a hat or cap thanks to its two rounded tips.

The EU-72 towel hook is difficult to bend, has excellent load capacity and durability, and is suitable for hanging various items.

The surface of the EU-72 coat hook is made of high-quality stainless steel, smooth and will not hurt your hands.

The edges of the hook are also beveled for more safety.

The surface structure is stable and durable, very suitable for the humid environment such as bathroom, swimming pool, hotel bathroom or kitchen.

The bow of the EU-72 coat hook has a smooth and unique design, which is practical and beautiful, can hang items well.

The high-quality EU-72 coat hooks have a simple and robust design and are perfect for, among other things:

• humid environment
• Shipbuilding
• Yachts
• Boats
• Hobby room
• Garage
• Wall
• Beach hotel
• Cloakroom
• Bathroom
• Forecourt
• Swimming pool

Technical details:

• Weight: 118 g
• Load capacity: 294 N (30 kp)
• Size: 72 mm (2-53/64″)
• Material thickness: 14 mm (35/64″) x 8 mm (5/16″)
• Practical
• with two end hooks
• high-quality
• high load capacity
• no sharp edges
• rounded hook ends
• stable
• glossy polished
• weatherproof
• Stainless (corrosion resistant)
• high brand quality of Sugatsune / LAMP®

Surface:

• Glossy polished
• High-quality look

Assembly:

• Fastening is done using the screws included in the scope of delivery (countersunk lens wood screw 4.1 x 20 mm)
• The fastening screws are also made of stainless steel
• The EU-72 double wall hooks have two mounting holes with a diameter of ⌀4.6 mm (3/16″)
• The distance between the mounting holes is 34 mm (1-11/32″)

Dimensions:

• Coat Hook Height: 72 mm (2-53/64″)
• Depth: 52 mm (2-3/64″)
• Width: 56 mm (2-13/64″)

For more dimensions and details, see technical drawing.

Material:

• The EU-72 coat hooks are made of high-quality SUS316 (V4A) stainless steel
• SUS316 stainless steel (also known as V4A) is a stainless steel with excellent corrosion resistance
• Due to their resistance to chlorine-containing substances, fittings made of SUS316 stainless steel are used for use near the coast and are expressly recommended

Included in delivery:

• 1 piece double hook EU-72 made of high-quality stainless steel SUS316 (V4A), polished to a glossy finish
• 2 pieces countersunk wood screw 4.1 x 20 mm made of stainless steel

Manufacturer’s part numbers:

• Article ID: 110-020-271
• Item number: EU-72
• EAN number: 4510932013222

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

Wall double hooks for wardrobe, bathroom, outdoor area, swimming pool and much more.

The EU-50 coat hooks are made of extra thick 5mm SUS 316 stainless steel, which ensures durability and longevity.

The double hook has two hook ends to hang up to three items. E.g. backpack and two pieces of clothing.

The EU-50 double wall hook is also very suitable for a hat or cap thanks to its two rounded tips.

The EU-50 towel hook is difficult to bend, has excellent load capacity and durability, and is suitable for hanging various items.

The surface of the EU-50 coat hook is made of high-quality stainless steel, smooth and will not hurt your hands.

The edges of the hook are also beveled for more safety.

The surface structure is stable and durable, very suitable for the humid environments such as bathroom, swimming pool, hotel bathroom or kitchen.

The bow of the EU-50 coat hook has a smooth and unique design, which is practical and beautiful, and provides a secure hold for objects.

The high-quality EU-50 coat hooks have a simple and robust design and are perfect for, among other things:

• humid environment
• Shipbuilding
• Yachts
• Boats
• Hobby room
• Garage
• Wall
• Beach hotel
• Cloakroom
• Bathroom
• Forecourt
• Swimming pool

Technical details:

• Weight: 42 g
• Load capacity: 196 N (20 kp)
• Size: 50 mm (1-31/32″)
• Material thickness: 9 mm (23/64″) x 5 mm (13/64″)
• Practical
• with two end hooks
• high-quality
• high load capacity
• no sharp edges
• rounded hook ends
• stable
• glossy polished
• weatherproof
• Stainless (corrosion resistant)
• high brand quality of Sugatsune / LAMP®

Surface:

• Glossy polished
• High-quality look

Assembly:

• The fastening is done using the screws included in the scope of delivery (countersunk lens wood screw 3.5 x 20 mm)
• The fastening screws are also made of stainless steel
• The EU-50 double wall hooks have two mounting holes with a diameter of ⌀4 mm (5/32″)
• The distance between the mounting holes is 20 mm (25/32″)

Dimensions:

• Coat Hook Height: 50 mm (1-31/32″)
• Depth: 38 mm (1-1/2″)
• Width: 38 mm (1-1/2″)

For more dimensions and details, see technical drawing.

Material:

• The EU-50 coat hooks are made of high-quality SUS316 stainless steel (V4A, 1.4401, AISI316)
• SUS316 stainless steel (also known as V4A) is a stainless steel with excellent corrosion resistance
• Due to their resistance to chlorine-containing substances, fittings made of SUS316 stainless steel are used for use near the coast and are expressly recommended

Included in delivery:

• 1 piece double hook EU-50 made of high-quality stainless steel SUS316 (V4A or 1.4401), glossy polished
• 2 pieces countersunk wood screw 3.5 x 20 mm made of stainless steel

Manufacturer’s part numbers:

• Article ID: 110-020-270
• Item number: EU-50
• EAN number: 4510932013215

Manufacturer: Sugatsune / LAMP® (Japan)

Application:

V4A safety lock rope hook for shipbuilding, outdoor, humid environment, harsh environment and much more.

The hooks with safety flap EN-K84 (eyelet hook) have a spring-loaded cap that closes automatically as soon as the rope, cord or cable has been hung up. This prevents these objects from detaching from the hook on their own.

The spring hook EN-K84 can also be used perfectly as a leash holder.

The stainless steel hook EN-K84 is suitable for rope or chain with a maximum diameter of ⌀10 mm (25/64″).

The high-quality hooks with safety flap EN-K84 have a simple and robust design and fit perfectly for, among other things:

• Leash
• Shipbuilding
• Forecourt
• humid environment
• harsh environment

Technical details:

• Weight: 92 g
• Load capacity: 196 N (20 kp)
• Size: 84 mm (3.4″)
• high-quality
• stable
• Glossy polished
• weatherproof
• Stainless (corrosion-free)
• high brand quality of Sugatsune / LAMP®

Surface:

• Glossy polished

Assembly:

• The fastening is carried out using the screws included in the scope of delivery (countersunk self-tapping screw 4 x 25 mm)
• The fastening screws are also made of stainless steel
• The hook with safety flap EN-K84 has two mounting holes with the distance (P) 64 mm (2-33/64″)

Dimensions:

• Length of hook with lock (L): 84 mm (3-5/16″)
• Depth (H1): 38 mm (1-1/2″)
• Width (W): 16 mm (5/8″)

For more dimensions and details, see technical drawing.

Manufacture:

• The hooks with safety flap EN-K84 are made of high-quality stainless steel V4A (SUS316, or 1.4401)
• SUS316 stainless steel (also known as V4A) is a stainless steel with excellent corrosion resistance
• Due to their resistance to chlorine-containing substances, fittings made of SUS316 stainless steel are used for use near the coast and are expressly recommended

Included in delivery:

• 1 piece hook with safety flap EN-K84 made of high-quality stainless steel, shiny polished
• Two pieces countersunk self-tapping screw 4 x 25 mm made of stainless steel

Watch the product video:

Manufacturer’s part numbers:

• Item identification number: 110-020-026
• Item number: EN-K84
• EAN number: 4510932004404

Manufacturer: Sugatsune / LAMP® (Japan)