Application:

Robust screw-on lock for cabinet doors, furniture doors, office cabinets, filing cabinets and much more.

Design: left-hand-closing. Left-closing means that the furniture hinges are on the left side of the door and the door handle and lock are on the right side (view of the closed door from the outside).

The screw-on lock 14.01.062-5 is used for the reliable locking of furniture doors and cabinet doors made of wood or wood-based materials.

The left-hand locking version is specially designed for left-hinged doors and thus enables a suitably aligned locking. The cylinder with ⌀19 mm (3/4″) and 22 mm (55/64″) lengths allows for compact installation and is suitable for numerous typical furniture constructions.

The keyed D20 alike version allows the same key to be used for several appropriately coded locks, thus simplifying the operation of larger furniture systems.

The compact 40 x 40 mm (1-37/64″) lock housing requires little mounting space on the inside of the furniture door.

The high-quality screw-on locks 14.01.062-5 are perfect for, among other things:

• Wooden cabinets
• Sideboards
• Storage furniture
• Cabinet doors
• Furniture doors
• Office cabinets
• Filing cabinets

Technical details:

• Design: left-hand closing
• Weight: 96 g
• Diameter: ⌀19 mm (3/4″)
• Available in 2 colours: nickel-plated and black, in 2 versions: left-hand and right-hand, and in 2 types: keyed alike and keyed differently
• Easy installation, stable
• Keyed alike D20
• Cylinder ⌀19 mm (3/4″)
• Backset 25 mm (63/64″)
• Compact housing 40 x 40 mm (1-37/64″)
• Four mounting holes ⌀4.3 mm
• Hole spacing 30.7 x 30.7 mm (1-13/64″)
• Latch width 20 mm (25/32″)
• Screw-on mounting
• Mechanical locking
• Suitable for wooden furniture
• Black
• Zamak, zinc die casting
• High brand quality from UMAXO®

Surface:

• Black
• Black finishes exude a timeless elegance and can help make a room look more luxurious and stylish
• While interior styles can change, black always remains a safe choice that can be easily adapted to new trends
• Black finishes can be used in different rooms, be it the kitchen, living room, or office

Assembly:

• Fastening is done with countersunk wood screws ⌀3.5 to ⌀4 mm, length: 15 to 16 mm (not included)
• First, the position of the lock on the inside of the left furniture door must be determined using the backset of 25 mm (63/64″)
• After that, a suitable through-hole for the ⌀19 mm (3/4″) cylinder must be made
• The box lock is guided through the hole with the cylinder and aligned with the four mounting holes on the inside of the door
• The lock is then fastened with four suitable countersunk wood screws
• The matching strike plate or counterpart is positioned on the furniture body in such a way that the 20 mm (25/32″) wide bolt can engage without bracing when locking (for more details, see assembly drawing)

Dimensions:

• Housing: 40 x 40 mm (1-37/64″)
• Cylinder diameter: ⌀19 mm (3/4″)
• Cylinder length: 22 mm (55/64″)
• Backset: 25 mm (63/64″)
• Mounting hole spacing horizontally and vertically: 30.7 mm (1-13/64″)
• Mounting holes: ⌀4.3 mm
• Latch width: 20 mm (25/32″)
• Latch overhang: 9 mm
• Bar thickness: 3.7 mm (9/64″)

For more dimensions and details , see technical drawing.

Material:

• The screw-on locks 14.01.062-5 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that are durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use

Included in delivery:

• 1 piece screw-on lock 14.01.062-5 made of solid die-cast zinc, black, 19 mm (3/4″), version: left-hand closing
• 2 pcs keys with black plastic handle
• This item does not include mounting screws

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.01.062-5
• GTIN number (EAN, UPC): 5704866504942

Manufacturer: SISO Denmark

Application:

Glass hinge for glass door, mirror door and much more.

The mirror hinge F029140325 can be used as a replacement for a defective Tiomos Mirro glass hinge from the manufacturer GRASS.

Fastening without glass drilling by gluing a Zamak adapter on the door.

The hinge is connected to the adapter via an integrated eccentric.

The hinge system has 4 adjustment options: support adjustment (side adjustment): ±2 mm, depth adjustment: +3/-2 mm, height adjustment ±2 mm and tool-free adjustable damping integrated into the hinge arm.

Click-On: tool-free installation of the door on the carcass. 125° opening angle, for door supports up to 19 mm.

With interlocking and soft-close damping – the door is closed quietly and closed by an integrated spring when closed.

The high-quality glass hinges F029140325 are perfect for, among other things:

• Replacement
• Repair
• Glass door
• Mirror door

Technical details:

• Weight: 200 g
• Easy installation, stable
• Beam angle: 125°
• With tumbler (with spring)
• Mounting of the door on the carcass: click-on, tool-free
• Door support: up to 19 mm.
• Support adjustment (side adjustment): ±2 mm
• Depth adjustment: +3 / -2 mm
• Height adjustment ±2 mm
• Soft-close cushioning: integrated into the hinge arm
• Soft-close damping adjustment: 3 levels, tool-free
• Nickel-plated
• Zamak, zinc die casting
• High brand quality from UMAXO®

Surface:

• Nickel-plated
• Nickel-plated surfaces are characterized by their high corrosion resistance and durability, making them ideal for use in damp rooms such as kitchens and bathrooms
• They offer an elegant, shiny look that looks modern and timeless at the same time
• They are also easy to clean, as they make dirt and fingerprints less visible and are easy to clean

Assembly:

• First, the zamak adapter is glued to the glass or mirror door. Please use a suitable glue and follow the instructions of the glue manufacturer
• Next, the hinge is connected to the adapter and attached via the integrated eccentric
• Then the mounting plate is attached to the body wall

Material:

• The glass hinges F029140325 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that are durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use

Included in delivery:

• 1 set mirror hinge F029140325 made of solid die-cast zinc, nickel-plated
• 1 piece mounting plate for glass and mirror to glue on (Zamak adapter)
• 1 piece cross-shaped mounting plate for cabinet body
• 1 piece cover cap for hinge arm
• This item does not include mounting screws

Watch the product video:

Manufacturer’s part numbers:

• Item ID: F029140325 (alternatively: F029140325217)
• GTIN number (EAN, UPC): 9003012994078

Manufacturer: GRASS

Application:

Screw-in nut for furniture, wooden board, chipboard, table and much more.

The M6 x 13 mm screw-in sleeve 8008005 s serve as thread adapters to install metric thread M6 in wooden panels, furniture, chipboard, tables, worktops.

The robust Hex threaded bushing 8008005 is perfect for invisible screwing and particularly stable fastening of furniture, benches and wooden components. The screw-in nut 8008005 has a cover edge for flush sinking into the wood without gaps.

The screw-in socket 8008005 has a self-tapping external thread ⌀8 mm for wood and an inner metric thread M6 into which metric screws or a threaded rod can be screwed, which enables a perfect, stable wood connection several times.

The advantage of the screw-in nut 8008005 over a direct connection is that when using the screw-in nut, you can disassemble and reassemble the piece of furniture several times without making the connection less stable.

Especially with soft wood, the screw-in nut 8008005 has a great advantage over wood connection with wood screws.

This is achieved by screwing the screw-in sleeve into the wooden panel of the piece of furniture 8008005 only once with the external thread ⌀8 mm and remaining there permanently. The furniture parts are then connected with the usual M6 screws, which are screwed directly to the screw-in sleeve.

Ideal for repeated assembly and disassembly, e.g. on furniture, exhibition stands, prototypes or repairs.

The high-quality screw-in joints 8008005 have a simple and robust design and are perfect for, among other things:

• Chair
• Worktop
• Wooden bench
• Wooden cabinet
• Furniture
• Wooden panel
• Chipboard
• Table

Technical details:

• Weight: 2.69 g
• Size: 13 mm (33/64″)
• Female thread: 6 mm (15/64″)
• Male thread: 8 mm (5/16″)
• Hex socket: 6 mm (15/64″)
• with drop-down edge for flush sinking into the wood
• galvanized
• Screwing in with 6 mm hexagon socket – fits common Allen keys
• Zamak (zinc die-casting)
• Cover edge 2 mm deep for flush finish without tears on the surface
• high brand quality from UMAXO®

Surface:

• Galvanized
• The galvanized surface protects against rust and corrosion

Assembly:

• The screw-in sleeves 8008005 must be screwed in at right angles to the wooden panel
• The screw-in nut is screwed in with an Allen key
• For the screw-in nut, a hole must be drilled in the wooden wall with a diameter of ⌀8 mm (5/16″) and a depth of 14 mm (35/64″) (for more details, see
  assembly drawing
  )

Dimensions:

• Screw-in nut length: 13 mm (33/64″)
• Female thread diameter: ⌀6 mm (15/64″)
• Male thread diameter: ⌀8 mm (5/16″)
• Lowering crane depth: 2 mm (5/64″)

For more dimensions and details, see technical drawing.

Material:

• The 8008005 screw-in sleeves are made of solid die-cast zinc

Included in delivery:

• 20 screw-in sockets 8008005 made of solid die-cast zinc, galvanised

Manufacturer’s part numbers:

• Article ID: 8008005
• EAN number: 8432393119267

Manufacturer: EMUCA

Application:

Sturdy eccentric pin for furniture connection and much more.

The practical eccentric pin 8084001 is a high-quality, robust connecting fitting for furniture construction and enables an almost invisible yet highly stable attachment of shelves in carcase furniture.

It has a wooden thread and is used for the fixed and invisible connection of carcass parts and is particularly suitable for shelves, cabinets and modular furniture.

The connecting bolt 8084001 is inserted into the side wall of a piece of furniture, for example, and connected to an eccentric connection in the underside of a shelf.

By simply putting it on and tightening, a form-fitting and force-fit connection is created, which at the same time secures the floor against lifting.

Turning the eccentric tightens the pin tightly and stabilizes the connection.

Suitable for the eccentric connectors 8470907, 8070907, 5054716 and 8049216.

The eccentric bolts 8084001 are perfect for applications where a precise, resilient and at the same time detachable connection is required.

Ideal for a wide range of furniture applications – enables quick and stable assembly and disassembly with common tools.

The high-quality connecting bolts 8084001 are perfect for, among other things:

• Carcass furniture
• Shelves
• Interior finish
• Shopfitting
• Exhibition
• Furniture connection

Technical details:

• Weight: 5.7g
• Size: 8 mm (5/16″)
• Easy installation, practical, stable
• For Hole ⌀6
• Zamak
• Zamak (zinc die-casting)
• high brand quality from UMAXO®

Surface:

• Zamak
• A zamak surface offers high corrosion resistance, so furniture hardware remains functional for a long time, even in damp environments
• In addition, thanks to its strength and dimensional stability, Zamak enables reliable load-bearing capacity

Assembly:

• The connecting bolt is screwed 8 mm (5/16″) deep into the side or middle section
• The shelf is then placed on top so that the housing grips cleanly over the screw head
• By tightening the clamping screw in the housing, the floor is tightened in a force-fit manner and at the same time secured against lifting (for further details, see assembly drawing)

Dimensions:

• Outer diameter of connecting bolt: ⌀6 mm (15/64″)
• Length of the threaded part: 8 mm (5/16″)
• Flange thickness above the plate surface: 2 mm (5/64″)
• Exterior Length: 6.8 mm (17/64″)

For more dimensions and details, see technical drawing.

Material:

• The connecting bolts 8084001 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
• In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

• 20 pcs connecting bolts 8084001 made of solid die-cast zinc, Zamak
• The eccentric connectors 8470907, 8070907, 5054716, 8049216 are not included in the scope of delivery and must be ordered separately

Manufacturer’s part numbers:

• Item ID: 8084001
• EAN number: 8432393120973

Manufacturer: EMUCA

Application:

Sturdy eccentric pin for furniture connection and much more.

The practical eccentric pin 8083901 is a high-quality, robust connecting fitting for furniture construction and enables an almost invisible yet highly stable attachment of shelves in carcass furniture.

It has a wooden thread and is used for the fixed and invisible connection of carcass parts and is particularly suitable for shelves, cabinets and modular furniture.

The connecting bolt 8083901 is inserted into the side wall of a piece of furniture, for example, and connected to an eccentric connection in the underside of a shelf.

By simply putting it on and tightening, a form-fitting and force-fit connection is created, which at the same time secures the floor against lifting.

Turning the eccentric tightens the pin tightly and stabilizes the connection.

Suitable for the eccentric connectors 8470907, 8070907, 5054716 and 8049216.

The eccentric bolts 8083901 are perfect for applications where a precise, resilient and at the same time detachable connection is required.

Ideal for a wide range of furniture applications – enables quick and stable assembly and disassembly with common tools.

The high-quality connecting bolts 8083901 are perfect for, among other things:

• Carcass furniture
• Shelves
• Interior finish
• Shopfitting
• Exhibition
• Furniture connection

Technical details:

• Weight: 2.31 g
• Size: 11 mm (7/16″)
• Easy installation, practical, stable
• For Hole ⌀6
• Zamak
• Zamak (zinc die-casting)
• high brand quality from UMAXO®

Surface:

• Zamak
• A zamak surface offers high corrosion resistance, so furniture hardware remains functional for a long time, even in damp environments
• In addition, thanks to its strength and dimensional stability, Zamak enables reliable load-bearing capacity

Assembly:

• The connecting bolt is screwed 11 mm (7/16″) deep into the side or middle section
• The shelf is then placed on top so that the housing grips cleanly over the screw head
• By tightening the clamping screw in the housing, the floor is tightened in a force-fit manner and at the same time secured against lifting (for further details, see assembly drawing)

Dimensions:

• Outer diameter of connecting bolt: ⌀6 mm (15/64″)
• Length of the threaded part: 11 mm (7/16″)
• Flange thickness above the plate surface: 2 mm (5/64″)
• Exterior Length: 6.8 mm (17/64″)

For more dimensions and details, see technical drawing.

Material:

• The connecting bolts 8083901 are made of solid die-cast zinc
• Industrial and furniture fittings made of zamak offer a high-quality look and feel that is durable and valuable
• Due to their high stability and corrosion resistance, they remain reliable and rust-free even with daily use
• In addition, they are often less expensive than solid brass or stainless steel fittings without compromising on quality

Included in delivery:

• 20 pcs connecting bolts 8083901 made of solid die-cast zinc, Zamak
• The eccentric connectors 8470907, 8070907, 5054716, 8049216 are not included in the scope of delivery and must be ordered separately

Manufacturer’s part numbers:

• Article ID: 8083901
• EAN number: 8432393120966

Manufacturer: EMUCA