Description
20 pieces screw-in socket, with countersunk head, with hexagon socket, cover edge and M6 internal thread, made of solid die-cast zinc, surface: natural (unprocessed), 8028001, size: 10 mm (0.4″)
Application:
Screw-in nut for furniture, wood board, chipboard, table and much more.
The 8028001 M6 x 10 mm screw-in sleeves serve as thread adapters to install metric thread M6 in wooden panels, furniture, chipboard, tables, worktops.
The robust Hex threaded bushing 8028001 is perfect for invisible screwing and particularly stable fastening of furniture, benches and wooden components. The screw-in nut 8028001 has a cover edge for flush sinking into the wood without a gap.
The screw-in socket 8028001 has a self-tapping external thread ⌀8 mm for wood and an inner metric thread M6 into which metric screws or a threaded rod can be screwed, which enables a perfect, stable wood connection several times.
The advantage of the screw-in nut 8028001 over a direct connection is that when using a screw-in nut, you can disassemble and reassemble the piece of furniture several times without making the connection less stable.
Especially with soft wood, the screw-in nuts 8028001 have a great advantage over wood joints with wood screws.
This is achieved by screwing the screw-in sleeve into the wooden panel of the piece of furniture 8028001 only once with the external thread ⌀8 mm and remaining there permanently. The furniture parts are then connected with the usual M6 screws, which are screwed directly to the screw-in sleeves.
The high-quality screw-in sleeves 8028001 have a simple and robust design and are perfect for, among other things:
- Chair
- Worktop
- Wooden bench
- Wooden cabinet
- Furniture
- Wooden panel
- Chipboard
- Table
Technical details:
- Weight: 1.95 g
- Size: 10 mm (0.4″)
- Female thread: 6 mm (15/64″)
- Male thread: 9.5 mm (3/8″)
- Hex socket: 6 mm (15/64″)
- with drop-down edge for flush sinking into the wood
- natural (unprocessed)
- Zamak
- Zinc die casting
- high brand quality from UMAXO®
Surface:
- Natural (unprocessed)
Assembly:
- The screw-in sleeves 8028001 must be screwed in at right angles to the wooden panel
- The screw-in nut is screwed in with an Allen key
- For the screw-in nut, a hole must be drilled in the wooden wall with a diameter of ⌀8 mm (5/16″) and a depth of 11 mm (7/16″) (for more details, see
assembly drawing
)
Dimensions:
- Screw-in nut length: 10 mm (25/64″)
- Female thread diameter: ⌀6 mm (15/64″)
- Male thread diameter: ⌀9.5 mm (3/8″)
- Lowering crane depth: 2 mm (5/64″)
For further dimensions and details
see technical drawing
.
Material:
- The 8028001 screw-in sleeves are made of solid die-cast zinc
Included in delivery:
- 20 pieces screw-in socket 8028001 made of solid die-cast zinc, natural (unprocessed)
Manufacturer’s part numbers:
- Article ID: 8028001
- EAN number: 8432393119755
Manufacturer: EMUCA
