High-quality lockable control cabinet handle with locking cylinder, made of zamak, with 8 mm square and two keys, design: different-locking, 14.08.056-0. T-handle made of zamak for control cabinet, locker, vehicle and much more, by SISO Denmark

Description

High-quality control cabinet handle, with permanently mounted cylinder and two keys, made of solid die-cast zinc, surface: chrome-plated, for internal mounting, 14.08.056-0, design: different-closing

Application:

T-handle made of zamak for control cabinet, locker, vehicle and much more.

The T-handle 14.08.056-0 is suitable for locking metal cabinets, equipment, machines, special vehicles, enclosures and containers.

To close the cabinet handle 14.08.056-0, the handle must be rotated 90 degrees, and then the key must be turned 180 degrees.

If necessary, the T-handle 14.08.056-0 can also be blocked with the key in the open position, e.g. to prevent the door from being unnecessarily locked.

The T-handle has a fixed pin cylinder.

No need to lock: the key can be removed in the open and closed position.

The high-quality 14.08.056-0 control cabinet locks have a simple and robust design and are perfect for:

• Locker
• Metal cabinet
• Sheet metal housing
• Cabinet door
• Ash pan
• Container
• Camper
• Switchboard
• Locker
• Vehicle

Technical details:

• Design: different-closing
• Weight: 241 g
• Size: 99 mm (3.9″)
• high-quality
• square: 8 x 8 mm (5/16″)
• without compulsory closing
• Mounting Type: Internal Mounting
• Reversible key (key fits into the lock on both sides)
• Drill hole spacing: 51 mm (2-1/64″)
• with permanently mounted pin cylinder
• Cylindrical Shape: Round Cylinder
• Closing movement: 90 degrees
• 400 different key variants
• Chrome-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Chrome-plated

Assembly:

• Fastening is done with M6 x 10 mm screws (not included)
• The T-handle 14.08.056-0 is for screwing
• The mounting plate of the control cabinet lock 14.08.056-0 has two mounting holes with the drill hole spacing: 51 mm (2-1/64″) (for further details see
  assembly drawing
  )

 

Dimensions:

• Cabinet lock length: 99 mm (3-57/64″)
• Mounting plate length: 75 mm (2-61/64″)
• Mounting plate width: 43 mm (1-11/16″)
• Drill hole spacing: 51 mm (2-1/64″)
• Square dimensions: 8 x 8 mm (5/16″)
• Square length: 3-5/64″ (78 mm)

 

For further dimensions and details
see technical drawing
.

Manufacture:

Material:

• The control cabinet locks 14.08.056-0 are made of solid die-cast zinc

Included in delivery:

• 1 control cabinet handle 14.08.056-0 made of solid die-cast zinc, chrome-plated, with permanently mounted locking cylinder
• 2 keys (reversible keys)

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.08.056-0
• EAN Number: 5704866044929

Manufacturer: SISO Denmark