High-quality lockable garage door handle with locking cylinder, made of zamak, with 8 mm square and two keys, for front mounting, design: different-locked, 14.08.052-0. Cross handle made of zamak for garage door and much more, by SISO Denmark

17,89 

In stock

Description

High-quality garage door handle, with fixed cylinder and two keys, made of solid die-cast zinc, surface: chrome-plated, for front mounting, 14.08.052-0, design: different-closing

Application:

Cross handle made of zamak for garage door and much more.

blank
High-quality lockable garage door handle with locking cylinder, made of zamak, with 8 mm square and two keys, for front mounting, by SISO, version: different-locked. Application

 

The cross handle 14.08.052-0 is suitable for most garage doors and garages.

To close the garage door handle 14.08.052-0, the handle must be turned 90 degrees, and then the key must be rotated 180 degrees.

If necessary, the cross handle 14.08.052-0 can also be blocked with the key in the open position, e.g. to avoid unwanted locking of the gate.

The cross handle has a fixed pin cylinder.

No need to lock: the key can be removed in the open and closed position.

The high-quality garage door handles 14.08.052-0 have a simple and robust design and are perfect for:

  • Locker
  • Locker
  • Metal cabinet
  • Sheet metal housing
  • Cabinet door
  • Ash pan
  • Container
  • Vehicle
  • Camper
  • Garage door

Technical details:

  • Design: different-closing
  • Weight: 190 g
  • Size: 99 mm (3.9″)
  • high-quality
  • square: 8 x 8 mm (5/16″)
  • without compulsory closing
  • Reversible key (key fits into the lock on both sides)
  • Drill hole spacing: 38 mm (1-1/2″)
  • with permanently mounted pin cylinder
  • Cylindrical Shape: Round Cylinder
  • Closing movement: 90 degrees
  • 400 different key variants
  • Chrome-plated
  • Zamak
  • Zinc die casting
  • high brand quality from UMAXO®

Surface:

  • Chrome-plated

Assembly:

  • The cross handle 14.08.052-0 is for screwing
  • The square is fastened and tightened in the cross handle with the square wrench included in the scope of delivery
  • The mounting plate of the garage door handle 14.08.052-0 has two mounting holes with the drill hole spacing: 38 mm (1-1/2″)

Dimensions:

  • Garage Door Handle Length: 3-57/64″ (99 mm)
  • Mounting plate length: 60 mm (2-23/64″)
  • Mounting plate width: 30 mm (1-3/16″)
  • Drill hole spacing: 38 mm (1-1/2″)
  • Square dimensions: 8 x 8 mm (5/16″)
  • Square length: 127 mm (5″)
blank
High-quality lockable garage door handle with locking cylinder, made of zamak, with 8 mm square and two keys, for front mounting, 99 mm, by SISO, chrome-plated. Technical drawing

 

For further dimensions and details
see technical drawing
.

Manufacture:

Material:

  • The garage door handles 14.08.052-0 are made of solid die-cast zinc

Included in delivery:

  • 1 piece garage door handle 14.08.052-0 made of solid die-cast zinc, chrome-plated, with permanently mounted locking cylinder
  • 1 piece square, 8 x 8 mm (5/16″), 127 mm (5″)
  • 2 keys (reversible keys)
  • 1 piece of fastening screw
  • 1 piece washer
  • 1 piece serrated washer
  • 1 square wrench

Additional information:

Manufacturer’s part numbers:

  • Article identification number: 14.08.052-0
  • EAN Number: 5704866506052

Manufacturer: SISO Denmark

SISO Denmark

You may also like…