Description
Interchangeable core, different keying, including two keys made of solid zinc alloy (ZDC), 14.03.310-0
Application:
Cylindrical core for SISO locks and much more.
The interchangeable cores 14.03.310-0 can be used in various locks and knobs from the manufacturer SISO.
The high-quality interchangeable cores 14.03.310-0 are suitable for:
- SISO rotary knobs
- SISO Locks
Technical details:
- Weight: 35 g
- Size: 12.4 mm (0.5″)
- high-quality
- stable
- Nickel-plated
- Zinc alloy
- ZDC
- Zinc die casting
- high brand quality from UMAXO®
Surface:
- Nickel-plated
Assembly:
- Prepare the red cylinder change wrench
- Make sure the arrow on the blue cap is pointing in the direction of the latch
- Pull the blue cap out of the lock housing. Make sure the locking tab stays in the same position (slightly outwards)
- Keep the transparent cover on the cylinder. Replace the black key with the red key
- When the red key is in the cylinder, pull off the transparent cover from the cylinder
- Before installing the cylinder in the lock housing, make sure that the female part in the lock housing and the bushing at the top of the cylinder match
- Assemble the cylinder into the lock housing
- Rotate the red key
- Pull out the red key
- Insert the black key into the cylinder and check if the lock is working properly
- Subsequently, the lock is ready for operation (for further details see
assembly drawing
)
Dimensions:
- Interchangeable core diameter: ⌀12.4 mm (31/64″)
- Depth (D): 17.5 mm (11/16″)
- Rosette diameter: ⌀15.3 mm (39/64″)
- Bolt size: 7.2 mm (9/32″)
For further dimensions and details
see technical drawing
.
Manufacture:
- The interchangeable cores 14.03.310-0 are made of solid zinc alloy (ZDC)
Included in delivery:
- 1 piece interchangeable core 14.03.310-0 made of solid zinc alloy, nickel-plated
- 2 pieces of keys
- 1 piece cover
Additional information:
Manufacturer’s part numbers:
- Article identification number: 14.03.310-0
- EAN number: 5704866463898
Manufacturer: SISO Denmark
