Twist rod lock keyed alike, right-locking, surface: nickel-plated, version: right, 14.05.234-0. Espagnolette-Lock for padlock, for furniture, cabinet, wardrobe, office cabinet and much more, by SISO Denmark


In stock


Swivel bar lock, set for a cabinet door (without turning bar), made of solid die-cast zinc, surface: nickel-plated, 14.05.234-0, design: right


Espagnolette lock for padlock, for furniture, cabinet, wardrobe, office cabinet and much more.

Rotary rod lock keyed alike, right-locking, from SISO, nickel-plated, version: right. Application


The RBL.924.KA twist bar locks, also known as espagnolettes, are designed for easy and secure locking of cabinets and furniture.

The RBL.924.KA rod locks are used for particularly high doors. The bolt on the screw-on lock and the two locking hooks at the ends of the rods ensure a secure hold.

When locked by turning the knob, the door is locked at three points.

The Espagnolette-Lock fits the wood thickness from 19 to 20 mm

When the key is turned, the turning rod rotates. The locking hooks enclose the locking bolts and thus provide a secure and firm closure of the furniture door.

The locking cam moves from the lock into the strike plate and, together with the two locking hooks, ensures that the door is closed in three places.

Solid and high-quality workmanship ensures a long and smooth operation of these twist rod locks.

The high-quality RBL.924.KA rotary bar locks are suitable for:

  • School Furniture
  • Doctor’s office furniture
  • Hospital Furniture
  • Shopfitting
  • Furniture
  • Cabinet
  • Wardrobe
  • Office cabinet

Technical details:

  • Version: right
  • Weight: 288 g
  • Size: 16.5 mm (0.7″)
  • Lock: right-hand closing
  • Lock: keyed alike (all keys match all locks)
  • Complete set (without rotating bar) for a furniture door for cabinets and cabinets
  • Easy and quick assembly, for screwing
  • For wooden doors with a thickness of 19 to 20 mm
  • nickel-plated
  • Zamak
  • Zinc die casting
  • high brand quality from UMAXO®


  • Nickel-plated
  • The nickel-plated surface protects against rust and corrosion


  • To screw on
  • To install the twist rod lock, a hole with a diameter of ⌀16.5 mm (21/32″) must be drilled in the front of the furniture
  • The cylinder (cylinder length 22 mm) is then inserted from the inside and the lock is screwed on
  • The latch handle is inserted into the lock using the mounting pin (included) and fastened (see
    assembly drawing
    for more details)
Rotary rod lock keyed alike, right-locking, from SISO, nickel-plated, version: right. Assembly drawing



  • Lock cylinder diameter: Φ16.5 mm (21/32″)
  • Twist Bar Lock Height: 74 mm (2-29/32″)
  • Width: 30 mm (1-3/16″)
  • Depth: 13.8 mm (35/64″)
  • Distance between mounting holes: 64 mm (2-33/64″)
  • Lock cylinder length: 16 mm (5/8″)
Twist rod lock keyed alike, right-locked, 16.5 mm, by SISO, nickel-plated. Technical drawing


For further dimensions and details
see technical drawing


  • The 14.05.234-0 torsion rod locks are made of solid die-cast zinc

Included in delivery:

  • 1 piece torsion rod lock 14.05.234-0 made of solid die-cast zinc, nickel-plated
  • 1 bolt handle, lockable
  • 1 piece washer (gasket) made of plastic
  • 2 pieces of keys
  • 1 piece of pin for mounting the latch handle
  • 2 pieces of asymmetrical locking bolts (top and bottom)
  • 2 pieces of locking hooks (top and bottom)
  • 2 rod guides
  • The swivel rod must be ordered separately. Available in lengths of 1000, 1200, 1500 and 2000 mm and in nickel, bronze or brass

Additional information:

Manufacturer’s part numbers:

  • Article identification number: 14.05.234-0
  • EAN Number: 5704866042734

Manufacturer: SISO Denmark

SISO Denmark

You may also like…