High-quality lockable garage door handle with locking cylinder, made of zamak, with 8 mm square and two keys, for internal fastening, design: different-locked, 14.08.054-0. Cross handle made of zamak for garage door and much more, by SISO Denmark

Description

High-quality garage door handle, with fixed cylinder and two keys, made of solid die-cast zinc, surface: chrome-plated, for internal fastening, 14.08.054-0, design: different-closing

Application:

Cross handle made of zamak for garage door and much more.

 

The cross handle 14.08.054-0 is suitable for most garage doors and garages.

To close the garage door handle 14.08.054-0, the handle must be turned 90 degrees, and then the key must be rotated 180 degrees.

If necessary, the cross handle 14.08.054-0 can also be blocked with the key in the open position, e.g. to avoid unwanted locking of the gate.

The cross handle has a fixed pin cylinder.

No need to lock: the key can be removed in the open and closed position.

The high-quality garage door handles 14.08.054-0 have a simple and robust design and are perfect for:

• Locker
• Locker
• Metal cabinet
• Sheet metal housing
• Cabinet door
• Ash pan
• Container
• Vehicle
• Camper
• Garage door

Technical details:

• Design: different-closing
• Weight: 230 g
• Size: 99 mm (3.9″)
• high-quality
• square: 8 x 8 mm (5/16″)
• without compulsory closing
• Mounting Type: Internal Mounting
• Reversible key (key fits into the lock on both sides)
• Drill hole spacing: 45 mm (1-49/64″)
• with permanently mounted pin cylinder
• Cylindrical Shape: Round Cylinder
• Closing movement: 90 degrees
• 400 different key variants
• Chrome-plated
• Zamak
• Zinc die casting
• high brand quality from UMAXO®

Surface:

• Chrome-plated

Assembly:

• The fastening is done using the screws included in the scope of delivery (M4 x 0.7 mm)
• The cross handle 14.08.054-0 is for screwing
• The square is fastened and tightened in the cross handle with the square wrench included in the scope of delivery
• The mounting plate of the garage door handle 14.08.054-0 has two mounting holes with the drill hole spacing: 45 mm (1-49/64″)

Dimensions:

• Garage Door Handle Length: 3-57/64″ (99 mm)
• Mounting plate length: 60 mm (2-23/64″)
• Mounting plate width: 30 mm (1-3/16″)
• Drill hole spacing: 45 mm (1-49/64″)
• Square dimensions: 8 x 8 mm (5/16″)
• Square length: 127 mm (5″)

 

For further dimensions and details
see technical drawing
.

Manufacture:

Material:

• The garage door handles 14.08.054-0 are made of solid die-cast zinc

Included in delivery:

• 1 piece garage door handle 14.08.054-0 made of solid die-cast zinc, chrome-plated, with permanently mounted locking cylinder
• 2 pieces of mounting screw M4 x 0.7 mm
• 1 piece square, 8 x 8 mm (5/16″), 127 mm (5″)
• 2 keys (reversible keys)
• 1 piece of fastening screw
• 1 piece washer
• 1 piece serrated washer
• 1 square wrench

Additional information:

• Download Reach Declaration

Manufacturer’s part numbers:

• Article ID: 14.08.054-0
• EAN Number: 5704866506045

Manufacturer: SISO Denmark